Mechanical properties acrylonitrile-butadiene rubber

George, J., Joseph, R., Thomas, S., and Varughese, K. T. 1995. High density polyethylene/acrylonitrile butadiene rubber blends Morphology, mechanical properties, and compatibilization. Journal of Applied Polymer Science 57 449-465. 

Polyurethane-based plasticizers can be obtained as a product of hydrolysis of poly-methane scrap as described elsewhere for material from printing rollers.These plasticizers were used to modify acrylonitrile-butadiene rubber.In still another development, diurethane was used in polyurethane elastomers. " Addition of diurethane improved potlife, and mechanical properties. The plasticizer performed better than DOP and it was substantially less migrating than DOP. " ... 

The natural rubber does not generally exhibit all the desired properties for use in the rubber industry. Thus, it is possible to obtain better mechanical and physical properties at a lower cost by blending natural rubber with synthetic rubbers. Normally, natural rubber is deteriorated by ozone and thermal attacks due to its highly unsaturated backbone, and it also shows low oil and chemical resistances due to its non-polarity. However, these properties can be achieved by blending it with low unsaturated ethylene propylene diene monomer rubber, styrene butadiene rubber, carboxylate styrene butadiene rubber, nitrile butadiene rubber, chloroprene rubber, chlorosulfonated polyethylene rubber, and acrylonitrile butadiene rubber. 

Gatos KG, Karger-Kocsis J (2007) Effect of the aspect ratio of siheate platelets on the mechanical and barrier properties of hydrogenated acrylonitrile butadiene rubber (HNBR)/layeted silicate nanocomposites. Eur Polym J 43 1097-1104... 

Tian M, Su LL, Cai WT, Win S, Chen Q, Fong H, Zhang LQ (2011) Mechanical properties and reinfoFctanent mechanisms of hydrogenated acrylonitrile butadiene rubber composites containing fibrillar silicate nanofibers and short aramid microfibers. J Appl Polym Sci 120 1439-1447... 

The modified fillers were used in two matrices with different polarity the ethylene-propylene copolymer EPM and hydrogenated acrylonitrile-butadiene rubber HNBR. Elastomers were crosslinked with dicumyl peroxide DCP. The influence of the variously modified fillers on the cross-linking density of the vulcanizates, rheometric and mechanical properties of filled systems were investigated. The ageing studies (thermal, atmospheric and under UV radiations) were conducted. 

Nitrile mbber finds broad application in industry because of its excellent resistance to oil and chemicals, its good flexibility at low temperatures, high abrasion and heat resistance (up to 120°C), and good mechanical properties. Nitrile mbber consists of butadiene—acrylonitrile copolymers with an acrylonitrile content ranging from 15 to 45% (see Elastomers, SYNTHETIC, NITRILE RUBBER). In addition to the traditional applications of nitrile mbber for hoses, gaskets, seals, and oil well equipment, new applications have emerged with the development of nitrile mbber blends with poly(vinyl chloride) (PVC). These blends combine the chemical resistance and low temperature flexibility characteristics of nitrile mbber with the stability and ozone resistance of PVC. This has greatly expanded the use of nitrile mbber in outdoor applications for hoses, belts, and cable jackets, where ozone resistance is necessary. 

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

The microphase structure and mechanical properties of the blends containing neat acrylonitrile-butadiene-styrene copolymer (ABS), styrene-acrylonitrile copolymer (SAN) and sodium sulfonated SAN ionomer have been investigated as a function of ion content of the ionomer in the blend by Park et a/.51 The interfacial adhesion was quantified by H NMR solid echo experiments. The amount of interphase for the blend containing the SAN ionomer with low ion content (3.1 mol%) was nearly the same as that of ABS, but it decreases with the ion content of the ionomer for the blend with an ion content greater than 3.1 mol%. Changing the ionomer content in the blends shows a positive deviation from the rule of mixtures in tensile properties of the blends containing the SAN ionomer with low ion content. This seems to result from the enhanced tensile properties of the SAN ionomer, interfacial adhesion between the rubber and matrix, and the stress concentration effect of the secondary particles. 

In heterophase polymeric materials such as rubber modified polystyrene or acrylonitrile-butadiene-styrene (ABS) resins, outstanding mechanical properties can be obtained only by regulating the dispersed rubber particle size and by achieving adhesion between the rubber and the resin phase. This can usually be achieved by adding block or graft copolymers, or by their formation in situ, as in industry. 

---