Poly methane

The Poly methane Polymer of 2,5-Dinitraza-1,6-Hexane Diisocyanate and 2,2-Din it ro-1,3-Propanediol. 

Poly[methane /Av(4-phcnyl)carbonatc 513 to 573 Poly[l,1-ethane / i.y(4-phenyl)carbonatc)] 468 ... 

Poly[di(n-propyl itaconate)] Poly[ethylene-N-(P-trimethylsilylethyl)imine] Poly[methane h/.v(4-phenyl)carbonate] Poly[N,N -(/ ,p -oxydiphenylene)pyromellitiinide] Poly[oxy(2,6-diisopropyl-l,4-phenylene)]... 

Polyurethane-based plasticizers can be obtained as a product of hydrolysis of poly-methane scrap as described elsewhere for material from printing rollers.These plasticizers were used to modify acrylonitrile-butadiene rubber.In still another development, diurethane was used in polyurethane elastomers. " Addition of diurethane improved potlife, and mechanical properties. The plasticizer performed better than DOP and it was substantially less migrating than DOP. " ... 

IHA Ihata, 0., Kayaki, Y., and Ikariya, T., Aliphatic poly(methane-amine)s synthesized by copolymerization of aziridines and supercritical carbon dioxide. Macromolecules,... 

Resins formed from the reaction of poly(vinyl alcohol) with aldehydes. The formal derivative (from methanal) is used in wire coatings and adhesives and the bulyral (from butanal) is used in metal paints, wood-sealers, adhesives and in safety glass interlayers. 

Titanium carbide may also be made by the reaction at high temperature of titanium with carbon titanium tetrachloride with organic compounds such as methane, chloroform, or poly(vinyl chloride) titanium disulfide [12039-13-3] with carbon organotitanates with carbon precursor polymers (31) and titanium tetrachloride with hydrogen and carbon monoxide. Much of this work is directed toward the production of ultrafine (<1 jim) powders. The reaction of titanium tetrachloride with a hydrocarbon-hydrogen mixture at ca 1000°C is used for the chemical vapor deposition (CVD) of thin carbide films used in wear-resistant coatings. 

An important side reaction is the formation of diaryl methane derivatives ArCHaAr. Moreover poly substituted products may be obtained as minor products. Aromatic compounds have been treated with formaldehyde and hydrogen bromide or hydrogen iodide instead of hydrogen chloride. The formaldehyde may be replaced by another aldehyde the term Blanc reaction however stands for the chloromethylation only. 

Poly sulfide Polymers. These polymers are made up of aliphatic hydrocarbon units connected by di-, tri- or tetrasulfide links. The synthetic rubber found useful in ordn has hydrocarbon units linked by either O or formal segments. The polymers are usually prepd by the condensation of a suitable organic dihalide, usually the chloride, with aq Na polysulfide. According to Ref 8, the most practical organic dichloride is dichlorodiethylformal viz, Bis[ 2[Pg.827]

The notion of a pnre chemical snbstance can be related to empirically identifiable properties (e.g. sharp melting and boiling temperatures) but is nowadays understood in theoretical terms that are abstract (Johnson, 2002 Taber, 2002a). So hydrogen, methane, diamond, sodium, sodium chloride and polythene - poly(ethene) - are all considered examples of single chemical substances, although they are very different... 

Examination of the history of antioxidants such as hindered phenols and amines shows a move from low-MW products to higher-MW products. Specifically, polymer industries have abandoned the use of, e.g., butylated hydroxy toluene (BHT) in favor of tetrakismethylene (3,5-di-f-butyl-4-hydroxydrocinnamate)methane (see Figure 15.9). Likewise, polymeric HALS, like poly-methylpropyl-3-oxy-(4(2,2,6,6-tetramethyl)piperidinyl) siloxane, replaced the low-MW hindered amine Lowilite 77 (see Figure 15.10). The next obvious step was to produce a new class of stabilizers. 

The stability of polyanhydrides composed of the diacids sebacic acid (SA), bis( -carboxyphenoxy)methane (CPM), l,3-bis(g-carboxyphe-noxy)propane (CPP), l,6-bis( -carboxyphenoxy)hexane (CPH), and phenylenedipropionic acid (PDP), in solid state and in organic solutions, was studied over a 1-year period. Aromatic polyanhydrides such as poly(CPM) and poly(CPH) maintained their original molecular weight for at least a year in both solid state and solution (20). 

HydTOX5 proline-derived polyesters are usually readily soluble in a variety of organic solvents (benzene, toluene, chloroform, dichloro-methane, carbon tetrachloride, tetrahydrofuran, dimethylformamide, etc.) As expected, the solubility in hydrophobic solvents increased with increasing chain length of the N protecting group, while the solubility in polar solvents decreased. For example, poly(N-hexanoyl-hydroxyproline ester) is slightly soluble in ether but easily soluble in acetonitrile, while poly(N-palmitoylhydroxyproline ester) is readily soluble in ether but virtually insoluble in acetonitrile. 

---