Radicals, living

Sawamoto, M. and Kamigaito, M. (1999) Living radical polymerisation, in Synthesis of Polymers, ed. Schliiter, A.-D. (Wiley-VCH, Weinheim) p. 163. 

In addition, there are the short-lived radical CIO, the chlorine peroxide radical ClOO (cf. OCIO above), and the tetroxide radical CIO4 (p. 850). 

In addition to the stable I2O5 and moderately stable I4O9 and I2O4, several short-lived radicals have been detected and characterized during y-radiolysis and flash photolysis of iodates in aqueous alkali ... 

As discussed in Section 7.3, conventional free radical polymerization is a widely used technique that is relatively easy to employ. However, it does have its limitations. It is often difficult to obtain predetermined polymer architectures with precise and narrow molecular weight distributions. Transition metal-mediated living radical polymerization is a recently developed method that has been developed to overcome these limitations [53, 54]. It permits the synthesis of polymers with varied architectures (for example, blocks, stars, and combs) and with predetermined end groups (e.g., rotaxanes, biomolecules, and dyes). 

Figure 7.4-3 SEC traces for the Cu(l)Br-mediated living radical polymerization of MMA in the...

To examine potentiality of other ylides and their metal complex containing Sb, As, P, Bi, and Se as new novel initiator in polymer synthesis via living radical polymerization. 

The first steps towards living radical polymerization were laken by Otsu and colleagues283 in 1982. In 1985, this was taken one step further with the development by Solomon et al.l0 of nitroxide-mediated polymerization (NMP). This work was first reported in the patent literature30 and in conference papers but was not widely recognized until 1993 when Georges et aL, applied the method in... 

Most radicals are transient species. They (e.%. 1-10) decay by self-reaction with rates at or close to the diffusion-controlled limit (Section 1.4). This situation also pertains in conventional radical polymerization. Certain radicals, however, have thermodynamic stability, kinetic stability (persistence) or both that is conferred by appropriate substitution. Some well-known examples of stable radicals are diphenylpicrylhydrazyl (DPPH), nitroxides such as 2,2,6,6-tetramethylpiperidin-A -oxyl (TEMPO), triphenylniethyl radical (13) and galvinoxyl (14). Some examples of carbon-centered radicals which are persistent but which do not have intrinsic thermodynamic stability are shown in Section 1.4.3.2. These radicals (DPPH, TEMPO, 13, 14) are comparatively stable in isolation as solids or in solution and either do not react or react very slowly with compounds usually thought of as substrates for radical reactions. They may, nonetheless, react with less stable radicals at close to diffusion controlled rates. In polymer synthesis these species find use as inhibitors (to stabilize monomers against polymerization or to quench radical reactions - Section 5,3.1) and as reversible termination agents (in living radical polymerization - Section 9.3). 

Primary radical termination is also of demonstrable significance when very high rates of initiation or very low monomer concentrations are employed. It should be noted that these conditions pertain in all polymerizations at high conversion and in starved feed processes. Some syntheses of telechelics are based on this process (Section 7.5.1). Reversible primary radical termination by combination with a persistent radical is the desired pathway in many forms of living radical polymerization (Section 9.3). 

Unsymmetrical azo-compounds find application as initiators of polymerization in special circumstances, for example, as initiators of living radical polymerization [e.g. triphenylmethylazobenzene (30) (see 9.3.4)], as hydroxy radical sources [e.g. a-hydroperoxydiazene (31) (see 3.3.3,1)1, for enhanced solubility in organic solvents [e.g. f-butylazocyclohexanecarbonitrile (32)J, or as high temperature initiators [e.g. t-butylazoformamide (33)]. They have also been used as radical precursors in model studies of cross-termination in copolymerization (Section... 

The S-S linkage of disulfides and the C-S linkage of certain sulfides can undergo photoinduced homolysis. The low reactivity of the sulfur-centered radicals in addition or abstraction processes means that primary radical termination can be a complication. The disulfides may also be extremely susceptible to transfer to initiator (Ci for 88 is ca 0.5, Sections 6.2.2.2 and 9.3.2). However, these features are used to advantage when the disulfides are used as initiators in the synthesis of tel ec he lies295 or in living radical polymerizations. 96 The most common initiators in this context are the dithiuram disulfides (88) which are both thermal and photochemical initiators. The corresponding monosulfides [e.g. (89)J are thermally stable but can be used as photoinitiators. The chemistry of these initiators is discussed in more detail in Section 9.3.2. 

Termination in heterogeneous polymerization is discussed in Section 5.2.1,5 and the more controversial subject of termination during living radical polymerization is described in Section 5.2.1.6. Termination in copolymerization is addressed in Section 7.3. 

It remains a common misconception that radical-radical termination is suppressed in processes such as NMP or ATRP. Another issue, in many people s minds, is whether processes that involve an irreversible termination step, even as a minor side reaction, should be called living. Living radical polymerization appears to be an oxymoron and the heading to this section a contradiction in terms (Section 9.1.1). In any processes that involve propagating radicals, there will be a finite rate of termination commensurate with the concentration of propagating radicals and the reaction conditions. The processes that fall under the heading of living or controlled radical polymerization (e.g. NMP, ATRP, RAFT) provide no exceptions. 

In conventional radical polymerization, the chain length distribution of propagating species is broad and new short chains are formed continually by initiation. As has been stated above, the population balance means that, termination, most frequently, involves the reaction of a shorter, more mobile, chain with a longer, less mobile, chain. In living radical polymerizations, the chain lengths of most propagating species are similar (i.e. i j) and increase with conversion. Ideally, in ATRP and NMP no new chains are fonned. In practice,... 

The C-S bond of the sulfide end groups can be relatively weak and susceptible to thermal and photo- or radical-induced homolysis. This means that certain disulfides [for example 7-9] may act as iniferters in living radical polymerization and they can be used as precursors to block copolymers (Sections 7.5.1 and 9.3.2). 

The majority of polymers formed by living radical polymerization (NMP, ATRP, RAFT) will possess labile functionality at chain ends. Recent studies have examined the thermal stability of polystyrene produced by NMP with TEMPO (Scheme 8.3),2021 ATRP and RAFT (Scheme 8.4).22 In each case, the end groups... 

As in the case of PS (Section 8.2.1) polymers formed by living radical polymerization (NMP, ATRP, RAFT) have thermally unstable labile chain ends. Although PMMA can be prepared by NMP, it is made difficult by the incidence of cross disproportionation.42 Thermal elimination, possibly by a homolysis-cross disproportionation mechanism, provides a route to narrow polydispersity macromonomers.43 Chemistries for end group replacement have been devised in the case of polymers formed by NMP (Section 9.3.6), ATRP (Section 9.4) and RAFT (Section 9.5.3). 

Harrison et c /.146,147 have used PLP (Section 4.5.2) to examine the kinetics of MMA polymerization in the ionic liquid 18 (bmimPFfi). They report a large (ca 2-fold) enhancement in Ay and a reduction in At. This property makes them interesting solvents for use in living radical polymerization (Chapter 9). Ionic liquids have been shown to be compatible with ATRP14 "1 and RAFT.I57,15S However, there are mixed reports on compatibility with NMP.1 Widespread use of ionic liquids in the context of polymerization is limited by the poor solubility of some polymers (including polystyrene) in ionic liquids. 

Matyjaszewski and coworkers 190,191 have explored living radical copolymerization (ATRP and RAFT) in the presence of Lewis acids. 

Further examples of micellar stabilization when micelles are composed of block copolymers formed by living radical polymerization are mentioned in Section 9.9.2. 

For this book, we have decided to entitle this chapter Living Radical Polymerization and use the term throughout, it is a chapter describing various approaches to living radical polymerization. We do not intend to imply that termination is absent from all or, indeed, any of the polymerizations described, only that the polymerizations display at least some of the observable characteristics normally associated with living polymerization. 

The kinetics and mechanism of living radical polymerization have been reviewed by Fischer,21 Fukuda et at.,22 and Goto and Fuktida.23 In conventional radical polymerization, new chains are continually formed through initiation w hile existing chains are destroyed by radical-radical termination. The steady state concentration of propagating radicals is 10"7 M and an individual chain will have a lifetime of only 1-10 s before termination within a total reaction lime that is... 

It is not necessary that living radical polymerizations be slow. However, it follows from the above discussion that, for a high fraction ofliving chains, either the final degree of polymerization must be significantly lower than that in an otherwise similar conventional process or that conditions must be chosen such that the rate of polymerization is substantially lower. 

---