Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Living radical polymerization TEMPO

Most radicals are transient species. They (e.%. 1-10) decay by self-reaction with rates at or close to the diffusion-controlled limit (Section 1.4). This situation also pertains in conventional radical polymerization. Certain radicals, however, have thermodynamic stability, kinetic stability (persistence) or both that is conferred by appropriate substitution. Some well-known examples of stable radicals are diphenylpicrylhydrazyl (DPPH), nitroxides such as 2,2,6,6-tetramethylpiperidin-A -oxyl (TEMPO), triphenylniethyl radical (13) and galvinoxyl (14). Some examples of carbon-centered radicals which are persistent but which do not have intrinsic thermodynamic stability are shown in Section 1.4.3.2. These radicals (DPPH, TEMPO, 13, 14) are comparatively stable in isolation as solids or in solution and either do not react or react very slowly with compounds usually thought of as substrates for radical reactions. They may, nonetheless, react with less stable radicals at close to diffusion controlled rates. In polymer synthesis these species find use as inhibitors (to stabilize monomers against polymerization or to quench radical reactions - Section 5,3.1) and as reversible termination agents (in living radical polymerization - Section 9.3). [Pg.14]

The majority of polymers formed by living radical polymerization (NMP, ATRP, RAFT) will possess labile functionality at chain ends. Recent studies have examined the thermal stability of polystyrene produced by NMP with TEMPO (Scheme 8.3),2021 ATRP and RAFT (Scheme 8.4).22 In each case, the end groups... [Pg.416]

Of the major methods for living radical polymerization, NMP appears the most successful for polymerization of the diene monomers. There are a number of reports on the use of NMP of diene monomers (B, I) with TEMPO,188,1103 861 4, cw and other nitroxides.127 High reaction temperatures (120-135 °C) were employed in all cases. The ratio of 1,2- 1,4-cis 1,4-trans structures obtained is similar to that observed in conventional radical polymerization (Section 4.3.2). [Pg.481]

Living Radical Polymerization of Styrene with TEMPO... [Pg.112]

Table 4. Living Radical Polymerization of St with TEMPO and BPOa [202]... Table 4. Living Radical Polymerization of St with TEMPO and BPOa [202]...
The living radical polymerization process is also valid for the polymerization of water-soluble monomers. The polymerization of sodium styrenesulfonate in aqueous ethylene glycol (80%) in the presence of TEMPO using potassium per-sulfate/sodium bisulfite as the initiator at 125 °C gave a water-soluble polymer with well-controlled molecular weight and its distribution [207]. [Pg.113]

As is expected from these results, it is very difficult to control the polymerization of monomers other than St, e.g., that of MMA, because of the too small dissociation energy of the chain end of poly(MMA). In fact, the polymerization of MMA in the presence of TEMPO yielded the polymer with constant Mn irrespective of conversion, and the Mw/Mn values are similar to those of conventional polymerizations [216]. The disproportionation of the propagating radical and TEMPO would also make the living radical polymerization of MMA difficult. In contrast, the controlled polymerization of MA, whose propagating radical is a secondary carbon radical,has recentlybeen reported [217]. Poly(MA) with a narrow molecular weight distribution and block copolymers were obtained. [Pg.115]

The polymerization kinetics have been intensively discussed for the living radical polymerization of St with the nitroxides,but some confusion on the interpretation and understanding of the reaction mechanism and the rate analysis were present [223,225-229]. Recently, Fukuda et al. [230-232] provided a clear answer to the questions of kinetic analysis during the polymerization of St with the poly(St)-TEMPO adduct (Mn=2.5X 103,MW/Mn=1.13) at 125 °C. They determined the TEMPO concentration during the polymerization and estimated the equilibrium constant of the dissociation of the dormant chain end to the radicals. The adduct P-N is in equilibrium to the propagating radical P and the nitroxyl radical N (Eqs. 60 and 61), and their concentrations are represented by Eqs. (62) and (63) in the derivative form. With the steady-state equations with regard to P and N , Eqs. (64) and (65) are introduced, respectively ... [Pg.116]

Nitroxide attached to macromolecules also induces the living radical polymerization of St. Yoshida and Sugita [252] prepared a polymeric stable radical by the reaction of the living end of the polytetrahydrofuran prepared by cationic polymerization with 4-hydroxy-TEMPO and studied the living radical polymerization of St with the nitroxide-bearing polytetrahydrofuran chain. The nitroxides attached to the dendrimer have been synthesized (Eq. 69) to yield block copolymers consisting of a dendrimer and a linear polymer [250,253]. [Pg.119]

Figure 2.44. Hypothetical scheme for TEMPO controlled "living" radical polymerization... Figure 2.44. Hypothetical scheme for TEMPO controlled "living" radical polymerization...
While in most of the reports on SIP free radical polymerization is utihzed, the restricted synthetic possibihties and lack of control of the polymerization in terms of the achievable variation of the polymer brush architecture limited its use. The alternatives for the preparation of weU-defined brush systems were hving ionic polymerizations. Recently, controlled radical polymerization techniques has been developed and almost immediately apphed in SIP to prepare stracturally weU-de-fined brush systems. This includes living radical polymerization using nitroxide species such as 2,2,6,6-tetramethyl-4-piperidin-l-oxyl (TEMPO) [285], reversible addition fragmentation chain transfer (RAFT) polymerization mainly utilizing dithio-carbamates as iniferters (iniferter describes a molecule that functions as an initiator, chain transfer agent and terminator during polymerization) [286], as well as atom transfer radical polymerization (ATRP) were the free radical is formed by a reversible reduction-oxidation process of added metal complexes [287]. All techniques rely on the principle to drastically reduce the number of free radicals by the formation of a dormant species in equilibrium to an active free radical. By this the characteristic side reactions of free radicals are effectively suppressed. [Pg.423]

Tetramethylpiperidine-l-oxy (TEMPO)-containing alkoxyamine derivatives are widely used as unimolecular initiators for living radical polymerization [5], The key step of the presently accepted mechanism of polymerization is the reversible capping of the polymer chain by the nitroxide radical. In 2002, Otsuka and Takahara applied the reversible... [Pg.241]

The need to better control surface-initiated polymerization recently led to the development of controlled radical polymerization techniques. The trick is to keep the concentration of free radicals low in order to decrease the number of side reactions. This is achieved by introducing a dormant species in equilibrium with the active free radical. Important reactions are the living radical polymerization with 2,2,4,4-methylpiperidine N-oxide (TEMPO) [439], reversible addition fragment chain transfer (RAFT) which utilizes so-called iniferters (a word formed from initiator, chain transfer and terminator) [440], and atom transfer radical polymerization (ATRP) [441-443]. The latter forms radicals by added metal complexes as copper halogenides which exhibit reversible reduction-oxidation processes. [Pg.217]

Scheme 1.33. Nitroxide-mediated living radical polymerization of styrene using TEMPO. After Hawker et al. (2001). Scheme 1.33. Nitroxide-mediated living radical polymerization of styrene using TEMPO. After Hawker et al. (2001).
In 1994, Matyjaszewski group first reported the controlled/ living radical polymerization of VAc initiated by the complex of Al(/Bu)3/Bpy/TEMPO (Bpy = 2,2 -bipyridyl, TEMPO = 2,2,6,6-tetramethyl-l-piperidinyloxy)." In benzene at 60 °C, the semilogarithmic plots of ln[M] t were linear at different initiator concentrations (Figure 1), indicating the polymerization was first order with respect to monomer concentration and the concentration of growing radicals remained constant during the polymerization. [Pg.141]

These radicals (DPPII, TEMPO, 13, 14) are comparatively stable in isolation as solids or in solution and either do not react or react very slowly with compounds usually thought of as substrates for radical reactions. They may, nonetheless, react with less stable radicals at close to diffusion controlled rates. In polymer synthesis these species find use as inhibitors (to stabilize monomers against polymerization or to quench radical reactions - Section 5.3.1) and as reversible lennination agents (in living radical polymerization - Section 9.3). [Pg.14]

It has been reported that living radical polymerization of 4-acetoxystyrene with a TEMPO (2,2,6,6-tetramethylpiperidine-l-oxyl) adduct as the initiator, followed by base hydrolysis produces PHOSTs with narrow polydispersity, 1.1-1.4, which tend to have a 10-20°C higher 7g than their conventional PHOST counterparts (with polydispersity of 2.0-2.4), whose 7g ranges from 140 to 180°C. Hirao et al. have demonstrated the synthetic route to monodisperse PHOST, involving the living anionic polymerization of 4-tert-butyl(dimethyl)siloxystyrene... [Pg.350]

Over the past few years there has been a tremendous interest in living radical polymerizations. One type of living radical polymerization is stable free radical polymerization, SFRP, where a stable free radical such as TEMPO (2,2,6,6-tetramethylpiperidinoxyl) is used to reversibly cap the growing polymer chain (L2). SFRP has the advantage over conventional radical polymerization in that the polymers prepared are living and can be used for further polymerization to make blocks or other complex architectures. The polymers prepared by the SFRP process have a narrower molecular weight distribution compared to polymers prepared by conventional radical polymerization in the case of block copolymers this may be a desirable attribute. This article focuses on the use of the SFRP process to prepare random copolymers. [Pg.28]

Vinyl Compounds. Photorefractive polymers can be prepared by living radical polymerization. 4-Vinyltriphenylamine can be polymerized by a conventional radical catalyst or a 2,2,6,6-tetramethylpiperidine-V-oxyl (TEMPO) like catalyst, such as V-(a-methylbenzyloxy)-2,2,6,6-tetrameth-ylpiperidine. " ... [Pg.41]


See other pages where Living radical polymerization TEMPO is mentioned: [Pg.74]    [Pg.112]    [Pg.121]    [Pg.127]    [Pg.388]    [Pg.128]    [Pg.23]    [Pg.115]    [Pg.295]    [Pg.461]    [Pg.467]    [Pg.480]    [Pg.483]    [Pg.484]    [Pg.67]    [Pg.480]    [Pg.386]    [Pg.387]    [Pg.40]    [Pg.76]    [Pg.114]    [Pg.123]    [Pg.129]    [Pg.2]    [Pg.206]   
See also in sourсe #XX -- [ Pg.325 ]

See also in sourсe #XX -- [ Pg.325 ]




SEARCH



Living polymerization

Living radical

Living radical polymerization

TEMPO

TEMPO polymerization

© 2024 chempedia.info