Living metal polymerization

A brief review has appeared covering the use of metal-free initiators in living anionic polymerizations of acrylates and a comparison with Du Font s group-transfer polymerization method (149). Tetrabutylammonium thiolates mn room temperature polymerizations to quantitative conversions yielding polymers of narrow molecular weight distributions in dipolar aprotic solvents. Block copolymers are accessible through sequential monomer additions (149—151) and interfacial polymerizations (152,153). 

As discussed in Section 7.3, conventional free radical polymerization is a widely used technique that is relatively easy to employ. However, it does have its limitations. It is often difficult to obtain predetermined polymer architectures with precise and narrow molecular weight distributions. Transition metal-mediated living radical polymerization is a recently developed method that has been developed to overcome these limitations [53, 54]. It permits the synthesis of polymers with varied architectures (for example, blocks, stars, and combs) and with predetermined end groups (e.g., rotaxanes, biomolecules, and dyes). 

To examine potentiality of other ylides and their metal complex containing Sb, As, P, Bi, and Se as new novel initiator in polymer synthesis via living radical polymerization. 

When undiluted 2-vinylfuran was added to metallic sodium (mirror or particles) an orange colour developed and some resinous material was deposited on the metal surface. On prolonged contact much of the monomer was converted into a partly-insoluble reddish resin with spectra unrelated to those of standard poly(2-vinyl-furan). Reaction of diluted monomer with sodium gave a milder interaction, but no evidence of living anionic polymerization. 

A radical initiator based on the oxidation adduct of an alkyl-9-BBN (47) has been utilized to produce poly(methylmethacrylate) (48) (Fig. 31) from methylmethacrylate monomer by a living anionic polymerization route that does not require the mediation of a metal catalyst. The relatively broad molecular weight distribution (PDI = (MJM ) 2.5) compared with those in living anionic polymerization cases was attributed to the slow initiation of the polymerization.69 A similar radical polymerization route aided by 47 was utilized in the synthesis of functionalized syndiotactic polystyrene (PS) polymers by the copolymerization of styrene.70 The borane groups in the functionalized syndiotactic polystyrenes were transformed into free-radical initiators for the in situ free-radical graft polymerization to prepare s-PS-g-PMMA graft copolymers. 

Hyperbranched polymers have also been prepared via living anionic polymerization. The reaction of poly(4-methylstyrene)-fo-polystyrene lithium with a small amount of divinylbenzene, afforded a star-block copolymer with 4-methylstyrene units in the periphery [200]. The methyl groups were subsequently metalated with s-butyllithium/tetramethylethylenediamine. The produced anions initiated the polymerization of a-methylstyrene (Scheme 109). From the radius of gyration to hydrodynamic radius ratio (0.96-1.1) it was concluded that the second generation polymers behaved like soft spheres. 

Keywords Controlled Polymerization Living Radical Polymerization Iniferter Chain-End Structure Molecular Weight Control Block Copolymer Dithiocarbamate Disulfide Nitroxide Transition Metal Complex... 

Similarly, it was also found that radical polymerization was induced in the Ni(CO)3(PPh3)/CBrCl3 redox system [155]. This complex is soluble in the polymerization medium, and the polymerization proceeded in a homogeneous system. This redox iniferter system has been intensively developed to the recent successful living radical polymerization using transition-metal complexes in combination with alkyl halides by several independent research groups (see Sect. 6.2). 

Living Radical Polymerization Systems with Transition-Metal Complexes... 

The metal-centered complexes can also be used as multifunctional initiators. For example, Fe2+(4,4 dichloromethyl-2,2 -bipyridine)3 or the Ru2+ complex have been used as initiators for the living cationic polymerization of 2-ethyl-2-oxazoline [120],... 

A fluorous biphasic system has been used to reduce the metal contamination arising in the copper-catalysed living radical polymerization of vinyl monomers. 

Much research has already been devoted in the past couple of years to (i) the immobilization of ATRP active metal catalysts on various supports to allow for catalyst separation and reycycling and (ii) ATRP experiments in pure water as the solvent of choice [62]. A strategy to combine these two demands with an amphiphilic block polymer has recently been presented. Two types of polymeric macroligands where the ligand was covalently linked to the amphiphilic poly(2-oxazo-line)s were prepared. In the case of ruthenium, the triphenylphosphine-functiona-lized poly(2-oxazoline)s described in section 6.2.3.2 were used, whereas in the case of copper as metal, 2,2 -bipyridine functionalized block copolymers were prepared via living cationic polymerization [63] of 2-methyl-2-oxazoline and a bipyridine-functionalized monomer as shown in Scheme 6.8. 

While in most of the reports on SIP free radical polymerization is utihzed, the restricted synthetic possibihties and lack of control of the polymerization in terms of the achievable variation of the polymer brush architecture limited its use. The alternatives for the preparation of weU-defined brush systems were hving ionic polymerizations. Recently, controlled radical polymerization techniques has been developed and almost immediately apphed in SIP to prepare stracturally weU-de-fined brush systems. This includes living radical polymerization using nitroxide species such as 2,2,6,6-tetramethyl-4-piperidin-l-oxyl (TEMPO) [285], reversible addition fragmentation chain transfer (RAFT) polymerization mainly utilizing dithio-carbamates as iniferters (iniferter describes a molecule that functions as an initiator, chain transfer agent and terminator during polymerization) [286], as well as atom transfer radical polymerization (ATRP) were the free radical is formed by a reversible reduction-oxidation process of added metal complexes [287]. All techniques rely on the principle to drastically reduce the number of free radicals by the formation of a dormant species in equilibrium to an active free radical. By this the characteristic side reactions of free radicals are effectively suppressed. 

The last decades have witnessed the emergence of new living Vcontrolled polymerizations based on radical chemistry [81, 82]. Two main approaches have been investigated the first involves mediation of the free radical process by stable nitroxyl radicals, such as TEMPO while the second relies upon a Kharash-type reaction mediated by metal complexes such as copper(I) bromide ligated with 2,2 -bipyridine. In the latter case, the polymerization is initiated by alkyl halides or arenesulfonyl halides. Nitroxide-based initiators are efficient for styrene and styrene derivatives, while the metal-mediated polymerization system, the so called ATRP (Atom Transfer Radical Polymerization) seems the most robust since it can be successfully applied to the living Vcontrolled polymerization of styrenes, acrylates, methacrylates, acrylonitrile, and isobutene. Significantly, both TEMPO and metal-mediated polymerization systems allow molec-... 

Kamigaito, M. Ando, T. Sawamoto, M. Metal-catalyzed living radical polymerization. Chem. Rev. 2001,101, 3689-3745. 

Wang JS, Matyjaszewski K (1995) Controlled living radical polymerization - atom transfer radical polymerization in the presence of transition metal complexes. J Am Chem Soc 117 5614-5615... 

The need to better control surface-initiated polymerization recently led to the development of controlled radical polymerization techniques. The trick is to keep the concentration of free radicals low in order to decrease the number of side reactions. This is achieved by introducing a dormant species in equilibrium with the active free radical. Important reactions are the living radical polymerization with 2,2,4,4-methylpiperidine N-oxide (TEMPO) [439], reversible addition fragment chain transfer (RAFT) which utilizes so-called iniferters (a word formed from initiator, chain transfer and terminator) [440], and atom transfer radical polymerization (ATRP) [441-443]. The latter forms radicals by added metal complexes as copper halogenides which exhibit reversible reduction-oxidation processes. 

Recently, living radical polymerizations have been well developed, and various methods such as (1) iniferter mediated radical polymerization [31], (2) transition metal-mediated radical polymerization or atom transfer radical polymerization (ATRP) [32-34] (3) nitroxide-mediated free-radical poly-... 

---