Liquid agent

The recovery of petroleum from sandstone and the release of kerogen from oil shale and tar sands both depend strongly on the microstmcture and surface properties of these porous media. The interfacial properties of complex liquid agents—mixtures of polymers and surfactants—are critical to viscosity control in tertiary oil recovery and to the comminution of minerals and coal. The corrosion and wear of mechanical parts are influenced by the composition and stmcture of metal surfaces, as well as by the interaction of lubricants with these surfaces. Microstmcture and surface properties are vitally important to both the performance of electrodes in electrochemical processes and the effectiveness of catalysts. Advances in synthetic chemistry are opening the door to the design of zeolites and layered compounds with tightly specified properties to provide the desired catalytic activity and separation selectivity. 

STB, fire, or DS2. Decontaminate liquid agent on the skin with the M258A1, M258, or M291 skin decontaminating kit. Decontaminate individual equipment with the M280 individual equipment decontamination kit. 

Flush eyes with water immediately. Use, the M258A1, M258, or M291 skin decontamination kit for liquid agent on the skin. Decontaminate individual equipment with the M280 individual equipment decontamination kit. Calcium hypochlorite (HTH), supertropical bleach (STB), household bleach, caustic soda, dilute alkali solutions, or decontaminating solution number 2 (DS2) are effective on equipment. Use steam and ammonia or hot, soapy water in a confined area. 

Eyes Very high toxicity much greater through eyes than skin. Very low concentration of vapor causes pupil of eyes to constrict, resulting in difficulty in seeing in dim light. Skin Very toxic. Decontamination of smallest drop of liquid agent is essential. Liquid penetrates skin readily. 

Median Lethal Dosage (LDS0) of Liquid Agent... 

The LDS0 is the amount of liquid agent expected to kill 50% of a group of exposed, unprotected personnels. 

Substances with high vapor pressure evaporate rapidly. Those with low vapor pressure evaporate slowly. The impact of vapor pressure on the rate of evaporation makes vapor pressure a very important property in considering the tactical use and duration of effectiveness of chemical agents. A potential chemical agent is valuable for employment when it has a reasonable vapor pressure. One with exceptionally high vapor pressure is of limited use. It vaporizes and dissipates too quickly. Examples are arsine and carbon monoxide. On the other hand, mechanical or thermal means may effectively aerosolize and disseminate solid and liquid agents of very low vapor pressure. Vapor pressure and volatility are related. Translated into volatility, vapor pressure is most understandable and useful. 

Individuals who have had previous exposure to materials that chap or dry the skin, such as alcohols, gasoline, or paint thinners, may be more susceptible to percutaneous penetration of liquid agents. In these situations, the rate of percutaneous penetration of the agent is greatly increased resulting in a decrease in the survival time that would otherwise be expected. 

A casualty with known exposure to liquid agent but no apparent signs or symptoms, or a casualty who is recovering from a severe exposure after receiving treatment. 

Agent vapors of both series cause eye irritation. However, there is no significant difference in the concentration that will irritate the eyes and the one that will produce eye injury. Although impacts from exposure to vesicants occur almost at once, contact with vapors or the liquid agent neither irritates the skin nor produces visible dermal injuries until after a substantial latency period. In contrast, HL (C03-A010), sulfur mustard mixed with lewisite, produces immediate pain due to the arsenic mustard component. 

---