IS drying-milling

Traditionally, com is dry-milled and suspended in boiling water to free the carbohydrate-rich starch compound from the nonstarch, cellulose biomass. The starch and cellulose components at this stage carry through the process. The non-convertible cellulose biomass is later separated. The milled com-water slurry, called mash, is boiled for about 1 hour. Enzymes such as a-amylase can be added to the process to help prevent gellation of starch. 

In order to understand corn milling and corn by-products, it is first necessary to know the composition of the different parts of the Corn kernel. Each year, about 6% of the U.S. corn crop is milled. Com is wet milled for the production of starch, sweeteners, and oil or is dry milled for the production of grits, flakes, meal, oil, and feeds. 

PROCESSING. As with corn, sorghum may be either dry milled or wet milled. However, most sorghum is dry milled, simply because it is easier to accomplish. 

Small, complex-shaped glass articles such as thread guides for the textile industry and television gun mounts for the electronics industry are made by the multiform process. The dry-milled powder is mixed with an inorganic binder and a fluid vehicle, and then atomi2ed by a spray dryer into small, dried agglomerates of glass powder and binder with good flow characteristics. They are subsequently pressed to the desired shape and fired. 

The Sulfate Process. A flow diagram for the sulfate process is shown in Figure 1. The strongly exothermic digestion of the dried, milled feedstock in 85—95°/ sulfuric acid converts metal oxides into soluble sulfates, primarily titanium and iron. 

Sodium and Potassium Benzoate. These salts are available in grades meeting the specifications of the 25ationalVormulary (18) and the Vood Chemicals Codex (19) (Table 7). Sodium benzoate [532-32-1] is produced by the neutralization of benzoic acid with caustic soda and/or soda ash. The resulting solution is then treated to remove trace impurities as weU as color bodies and then dried in steam heated double dmm dryers. The product removed from the dryers is light and fluffy and in order to reduce shipping and storage space the sodium benzoate is normally compacted. It is then milled and classified into various product forms, the names of which often bear Httle relationship to the actual form of the product. 

The chemical-grade ore, containing about 30% chromium, is dried, cmshed, and ground in ball mills until at least 90% of its particles are less than 75 ]lni. It is then mixed with an excess of soda ash and, optionally, with lime and leached residue from a previous roasting operation. In American and European practice, a variety of kiln mixes have been used. Some older mixes contain up to 57 parts of lime per 100 parts of ore. However, in the 1990s manufacturers use no more than 10 parts of lime per 100 parts of the ore, and some use no lime at all (77). The roasting may be performed in one, two, or three stages, and there maybe as much as three parts of leached residue per part of ore. These adaptations are responses to the variations in kiln roast and the capabihties of the furnaces used. 

The cmde diatomite, which may contain up to 60% moisture, is first milled in a method that preserves the intricate stmcture of the diatomite. This material is fed to dryers operating at relatively low temperatures, where virtually all of the moisture is removed (see Drying). Coarse and gritty nondiatomaceous earth material is removed in separators and preliminary particle si2e separation is made in cyclones. For many producers, all of the manufacturing processes, with the exception of the calcination step, take place while the material is being pneumatically conveyed. The resultant material is termed natural product. This is the only type of diatomite made by some producers. 

Chemical, semichemical, or mechanical breakdown of pulping material into fibers Removal of pulp impurities, cleaning and thickening of pulp fiber mixture Addition of chemicals in a staged process of reaction and washing increases whiteness and brightness of pulp, if necessary At nonintegrated pulp mills, pulp is dried and bundled into bales for transport to a paper mill... 

This type of pigment is the precipitate formed when molybdic oxide is dissolved in aqueous sodium hydroxide with the addition of sodium chromate. The resulting mixture is reacted with a solution of lead nitrate. The precipitate formed is further processed through filtration, washing, drying, milling, and packaging. 

The reaction of zinc oxide, hydrochloric acid, sodium dichromate, and potassium chloride produced zinc yellow as a precipitate, which is a complex compound of zinc, potassium, and chromium. The complex compound is further subjected to filtration, washing, drying, milling, and packaging for use. 

Imported maize is the raw material for several food ingredients used in the bakery industry. While maize can be dry milled like wheat, it is more commonly wet milled. The wet milling process is much better suited to separating the different components of maize so that the oil, the protein and the starch can be recovered separately. Maize starch is used directly in bakery products as corn flour, so-called even in the UK. 

Dried gluten is the protein fraction from wheat that has been milled to flour and the flour kneaded with water. This process allows the insoluble starch to be removed and the resulting proteinaceous mass is dried to... 

Wheat is normally dry milled. Maize can be dry milled but is normally wet milled. The wet milling process allows the maize to be fractionated into starch protein and oil. 

Willhoft A proposed process for making aluminum chloride from the solid waste from paper mills. The waste is mainly a mixture of clay with cellulose. It is dried and calcined in an inert atmosphere, giving a mixture of clay and caibon which chlorinates readily. Conceived by E. M. A. Willhoft and briefly examined by the Research Association for the Paper and Board, Printing and Packaging Industries (PIRA) in England in 1977, but not piloted. 

---