Ionic solids properties

Adsorption and catalysis represent a very broad domain, which in the following will be restricted to its most important aspects, in relation with ionic solid properties, and divided into three parts ... 

When we study a solid that does not have the characteristic lustrous appearance of a metal, we find that the conductivity is extremely low. This includes the solids we have called ionic solids sodium chloride, sodium nitrate, silver nitrate, and silver chloride. It includes, as well, the molecular crystals, such as ice. This solid, shown in Figure 5-3, is made up of molecules (such as exist in the gas phase) regularly packed in an orderly array. These poor conductors differ widely from the metals in almost every property. Thus electrical conductivity furnishes the key to one of the most fundamental classification schemes for substances. 

Ionic bond, 287, 288 dipole of, 288 in alkali metal halides, 95 vs. covalent, 287 Ionic character, 287 Ionic crystal, 81, 311 Ionic radius, 355 Ionic solids, 79, 81, 311 electrical conductivity, 80 properties of, 312 solubility in water, 79 stability of, 311... 

The strong attraction between oppositely charged ions accounts for the typical properties of ionic solids, such as their high melting points and their brittleness. A high temperature is required before the ions are able to move past one... 

Distinguish metallic solids, ionic solids, network solids, and molecular solids by their structures and by their properties (Sections 5.8-5.11 and 5.14). 

Apart from the three broad categories of student conceptions discussed above, students displayed several inappropriate conceptions relating to the stractural properties of substances. For example, 14% of students suggested that Mg + ions were present in magnesium ribbon. A second example involved the chemical reaction between copper(II) oxide powder and dilute sulphuric acid. In this instance, 25% of students suggested that Cu + ions were present only in aqueous solution but not in the solid and liquid states. This view was rather unexpected because students had earlier been introdnced to ionic and covalent compounds. It is likely that students had merely rote-learned the general rale without sufficient understanding that ionic solids are formed between metallic and non-metallic elements. 

Point defects can have a profound effect upon the optical properties of solids. The most important of these in everyday life is color,3 and the transformation of transparent ionic solids into richly colored materials by F centers, described below, provided one of the first demonstrations of the existence of point defects in solids. 

B. Ionic solids ionize in water, increasing the effect of all colligative properties. 

Magnesium fluoride has many properties that are characteristic of ionic solids. In general, ionic solids have the following properties ... 

There are several methods you can use to predict the type of bond in an unknown substance. For example, you can consider the substance s physical properties. In contrast to ionic solids, covalent (molecular) compounds typically have the following properties ... 

Within a crystal lattice, definite lines of cleavage are present along which a crystal may he split. This is an identifying property of ionic solids. 

Which physical properties of an ionic solid are related to the size of the lattice energy of the crystal ... 

Surfactant adsorption on solids from aqueous solutions plays a major role in a number of interfacial processes such as enhanced oil recovery, flotation and detergency. The adsorption mechanism in these cases is dependent upon the properties of the solid, solvent as well as the surfactant. While considerable information is available on the effect of solid properties such as surface charge and solubility, solvent properties such as pH and ionic strength (1,2,3), the role of possible structural variations of the surfactant in determining adsorption is not yet fully understood. 

Mackrodt W. C. and Stewart R. F. (1979). Defect properties of ionic solids, II Point defect energies based on modified electron gas potentials. J. Phys., 12C 431 49. 

Reaction between C in methanol and RTCNQ in acetonitrile yielded three kinds of ionic solids (1) insulators composed of methoxy substituted RTCNQ anions such as (CHC )[F4TCNQ-0Me ](H20) (Fig. 6) [136], (2) semiconducting CT solids with fully ionic RTCNQ radical anions such as (CHC )(TCNQ ) [137, 138], and (3) conducting CT solids of partially ionic or mixed valent RTCNQ radical anions such as (CHC"XMeTCNQ° >2 [138], where CHC" is the hemiprotonated cytosine pair (Fig. 6b). Cation units in aU products were found to be protonated cytosine species, most commonly CHC, where comes from methanol. This result suggests that the intrinsic transport properties of DNA should be studied not in protic solvents but under strictly dried conditions. 

All substances, except helium, if cooled sufficiently form a solid phase the vast majority form one or more crystalline phases, where the atoms, molecules, or ions pack together to form a regular repeating array. This book is concerned mostly with the structures of metals, ionic solids, and extended covalent structures structures which do not contain discrete molecules as such, but which comprise extended arrays of atoms or ions. We look at the structure and bonding in these solids, how the properties of a solid depend on its structure, and how the properties can be modified by changes to the structure. 

In a perfect crystal, all atoms would be on their correct lattice positions in the structure. This situation can only exist at the absolute zero of temperature, 0 K. Above 0 K, defects occur in the structure. These defects may be extended defects such as dislocations. The strength of a material depends very much on the presence (or absence) of extended defects, such as dislocations and grain boundaries, but the discussion of this type of phenomenon lies very much in the realm of materials science and will not be discussed in this book. Defects can also occur at isolated atomic positions these are known as point defects, and can be due to the presence of a foreign atom at a particular site or to a vacancy where normally one would expect an atom. Point defects can have significant effects on the chemical and physical properties of the solid. The beautiful colours of many gemstones are due to impurity atoms in the crystal structure. Ionic solids are able to conduct electricity by a mechanism which is due to the movement of fo/ 5 through vacant ion sites within the lattice. (This is in contrast to the electronic conductivity that we explored in the previous chapter, which depends on the movement of electrons.)... 

Much of the recent research in solid state chemistry is related to the ionic conductivity properties of solids, and new electrochemical cells and devices are being developed that contain solid, instead of liquid, electrolytes. Solid-state batteries are potentially useful because they can perform over a wide temperature range, they have a long shelf life, it is possible to make them very small, and they are spill-proof We use batteries all the time—to start cars, in toys, watches, cardiac pacemakers, and so on. Increasingly we need lightweight, small but powerful batteries for a variety of uses such as computer memory chips, laptop computers, and mobile phones. Once a primary battery has discharged, the reaction cannot be reversed and it has to be thrown away, so there is also interest in solid electrolytes in the production of secondary or storage batteries, which are reversible because once the chemical reaction has taken place the reactant concentrations can be... 

Oxides exhibit similar trends. In the third row, for example, Na20 and MgO are typical high-melting, ionic solids, and P4O10, S03, and C1207 are volatile, covalent, molecular compounds (Section 14.9). The metallic or nonmetallic character of an oxide also affects its acid-base properties. Na20 and MgO are basic, for example,... 

---