Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ionic existence

In the solid state, dinitrogen pentoxide is ionic, existing as N02+N03 and sometimes called nitronium nitrate. The same is true of dinitrogen pentoxide in polar solvents like nitric acid where complete ionization to nitronium and nitrate ions is observed. In the vapour phase, and in nonpolar solvents, a covalent structure is observed. This dichotomy of behavior in both physical state and in solution means that no single nitrating agent is as diverse and versatile as nitrogen pentoxide. [Pg.351]

For heterogeneous reactions where mixed mechanisms, that is, radical and ionic, exist, cavitation can improve both mechanisms. In this case, if the two mechanisms lead to the same product an overall increase in the rate of reaction will be obtained, but if they lead to different product distributions, cavitational switching might occur due to enhancement in the radical pathway and the nature of reaction products is actually changed due to cavitational effects. [Pg.241]

A more relevant example is the one of Fe O if the compound is ionic exists 40 which, from the condition of the global neutrality, each iron atom should be in oxidation state of+8/3, a not very suggestive picture. Instead, the compound can be written as a mixed-oxide state Fe0+Fe203=Fe(II) Fe(III)20. But, the secondary valence, introduced by Werner, indexes the number of the attached groups (both anion and neutral groups) to a metal center through the coordination number of the first coordination sphere. [Pg.161]

One anomaly inmrediately obvious from table A2.4.2 is the much higher mobilities of the proton and hydroxide ions than expected from even the most approximate estimates of their ionic radii. The origin of this behaviour lies in the way hr which these ions can be acconmrodated into the water structure described above. Free protons cannot exist as such in aqueous solution the very small radius of the proton would lead to an enomrous electric field that would polarize any molecule, and in an aqueous solution the proton inmrediately... [Pg.574]

For this second reaction Kjgs = 181 x 10" and hence pK, for ammonia solution is 4.75. The entity NHj. H2O is often referred to as ammonium hydroxide, NH4OH, a formula which would imply that either nitrogen has a covalency of five, an impossible arrangement, or that NH4OH existed as the ions NH4 and OH". It is possible to crystallise two hydrates from concentrated ammonia solution but neither of these hydrates is ionic. Hence use of the term ammonium hydroxide is to be discouraged in favour of ammonia solution . [Pg.217]

However, phosphorus pentachloride in the solid state has an ionic lattice built up of (PC ) and (PClg)" ions and these ions are believed to exist in certain solvents. Thus under these conditions the maximum covalency is reached with chlorine. In phosphorus pentabromide, PBrj, the solid has the structure [PBr4] [Br] . [Pg.251]

These are ionic solids and can exist as the anhydrous salts (prepared by heating together sulphur with excess of the alkali metal) or as hydrates, for example Na2S.9HjO. Since hydrogen sulphide is a weak acid these salts are hydrolysed in water,... [Pg.287]

These are formed by less electropositive elements. They are characterised by the existence of discrete molecules which exist even in the solid state. They have generally lower melting and boiling points than the ionic halides, are more volatile and dissolve in non-polar solvents. [Pg.344]

Reference has been made already to the existence of a set of inner transition elements, following lanthanum, in which the quantum level being filled is neither the outer quantum level nor the penultimate level, but the next inner. These elements, together with yttrium (a transition metal), were called the rare earths , since they occurred in uncommon mixtures of what were believed to be earths or oxides. With the recognition of their special structure, the elements from lanthanum to lutetium were re-named the lanthanons or lanthanides. They resemble one another very closely, so much so that their separation presented a major problem, since all their compounds are very much alike. They exhibit oxidation state -i-3 and show in this state predominantly ionic characteristics—the ions. [Pg.441]

In an excess of nitric acid, nitrous acid exists essentially as dinitrogen tetroxide which, in anhydrous nitric acid, is almost completely ionised. This is shown by measurements of electrical conductivity, and Raman and infra-red spectroscopy identify the ionic species... [Pg.55]

All the following compounds are charactenzed by ionic bonding between a group I metal cation and a tetrahedral anion Wnte an appropriate Lewis structure for each anion remembenng to specify formal charges where they exist... [Pg.50]

Ionic polymers may exist as undissociated, unsolvated ion pairs undissociated ion pairs solvated to some extent solvated ions dissociated to some extent or some combination of these. The propagation rate constant kp and the dissociation equilibrium constant K of the lithium salt of anionic... [Pg.420]

The actinide elements exhibit uniformity in ionic types. In acidic aqueous solution, there are four types of cations, and these and their colors are hsted in Table 5 (12—14,17). The open spaces indicate that the corresponding oxidation states do not exist in aqueous solution. The wide variety of colors exhibited by actinide ions is characteristic of transition series of elements. In general, protactinium(V) polymerizes and precipitates readily in aqueous solution and it seems unlikely that ionic forms ate present in such solutions. [Pg.218]

Common catalyst compositions contain oxides or ionic forms of platinum, nickel, copper, cobalt, or palladium which are often present as mixtures of more than one metal. Metal hydrides, such as lithium aluminum hydride [16853-85-3] or sodium borohydride [16940-66-2] can also be used to reduce aldehydes. Depending on additional functionahties that may be present in the aldehyde molecule, specialized reducing reagents such as trimethoxyalurninum hydride or alkylboranes (less reactive and more selective) may be used. Other less industrially significant reduction procedures such as the Clemmensen reduction or the modified Wolff-Kishner reduction exist as well. [Pg.470]

Thus nicotinoids that have the highest insecticidal action have the highest piC and, consequently, exist largely in the ionized form at physiological pH. This produces the anomaly that the compounds that are most highly ionized react most rapidly with the receptor protein, yet they are less able to penetrate through the ionic barrier surrounding the insect nerve synapse. [Pg.269]

Separation Processes. The product of ore digestion contains the rare earths in the same ratio as that in which they were originally present in the ore, with few exceptions, because of the similarity in chemical properties. The various processes for separating individual rare earth from naturally occurring rare-earth mixtures essentially utilize small differences in acidity resulting from the decrease in ionic radius from lanthanum to lutetium. The acidity differences influence the solubiUties of salts, the hydrolysis of cations, and the formation of complex species so as to allow separation by fractional crystallization, fractional precipitation, ion exchange, and solvent extraction. In addition, the existence of tetravalent and divalent species for cerium and europium, respectively, is useful because the chemical behavior of these ions is markedly different from that of the trivalent species. [Pg.543]

In its simplest form, a mass spectrometer is an instmment that measures the mass-to-charge ratios ml of ions formed when a sample is ionized by one of a number of different ionization methods (1). If some of the sample molecules are singly ionized and reach the ion detector without fragmenting, then the ml ratio of these ions gives a direct measurement of the molecular weight. The first instmment for positive ray analysis was built by Thompson (2) in 1913 to show the existence of isotopic forms of the stable elements. Later, mass spectrometers were used for precision measurements of ionic mass and abundances (3,4). [Pg.539]

The most common oxidation state of niobium is +5, although many anhydrous compounds have been made with lower oxidation states, notably +4 and +3, and Nb can be reduced in aqueous solution to Nb by zinc. The aqueous chemistry primarily involves halo- and organic acid anionic complexes. Virtually no cationic chemistry exists because of the irreversible hydrolysis of the cation in dilute solutions. Metal—metal bonding is common. Extensive polymeric anions form. Niobium resembles tantalum and titanium in its chemistry, and separation from these elements is difficult. In the soHd state, niobium has the same atomic radius as tantalum and essentially the same ionic radius as well, ie, Nb Ta = 68 pm. This is the same size as Ti ... [Pg.20]

The pentahalides of phosphorus, PX, in the gas phase exhibit varying tendencies to dissociate into trihaUde and halogen. InstabiUty increases with increasing ionic radius of the halogen. The pentafluoride appears to be thermally stable. Dissociation of the pentachloride, a few percent at 100°C and 101.3 kPa (1 atm), is essentially completed at 300°C (36). The pentabromide is partially dissociated in the Hquid state and totally dissociated above ca 35°C (39). Pentaiodide does not exist. The molecules of PF and PCl in the vapor phase are trigonal bipyramids. In the crystalline state, both pentachloride and pentabromide have ionic stmctures, ie, [PClJ IPClg] and [PBr4]" PBrJ , respectively. The PX" 4 cations are tetrahedral and the PX anion is octahedral (36,37). [Pg.366]

Commercial grades of socbum aluminate contain both waters of hycbation and excess socbum hycboxide. In solution, a high pH retards the reversion of socbum aluminate to insoluble aluminum hycboxide. The chemical identity of the soluble species in socbum aluminate solutions has been the focus of much work (1). Solutions of sodium aluminate appear to be totaby ionic. The aluminate ion is monovalent and the predominant species present is deterrnined by the Na20 concentration. The tetrahydroxyaluminate ion [14485-39-3], Al(OH) 4, exists in lower concentrations of caustic dehydration of Al(OH) 4, to the aluminate ion [20653-98-9], A10 2) is postulated at concentrations of Na20 above 25%. The formation of polymeric aluminate ions similar to the positively charged polymeric ions formed by hydrolysis of aluminum at low pH does not seem to occur. Al(OH) 4 has been identified as the predominant ion in dilute aluminate solutions (2). [Pg.139]

Table 2. In acidic solution all isomers exhibit fluorescence. 4-Aminophenol shows two bands one at 300 nm common to all the isomers, and the second at 370 nm attributed to the existence of an additional aqueous ionic species. Fluorescence also exists in neutral solution, but is aboHshed at high pH values (3-13). Table 2. In acidic solution all isomers exhibit fluorescence. 4-Aminophenol shows two bands one at 300 nm common to all the isomers, and the second at 370 nm attributed to the existence of an additional aqueous ionic species. Fluorescence also exists in neutral solution, but is aboHshed at high pH values (3-13).
Ammonium chloride [12125-02-9] NH Q, ammonium bromide [12124-97-9] NH Br, and ammonium iodide [12027-06-4] NH I, are crystalline, ionic compounds of formula wts 53.49, 97.94, and 144.94, respectively. Their densities d systematically foUow the increase in formula weight 1.53, 2.40, and 2.52. AH three exist in two crystal modifications (10) the chloride, bromide, and iodide have the CsQ stmcture below temperatures of 184.5, 137.8, and — 17.6°C, respectively each reversibly transforms to the NaQ. stmcture at higher temperatures. [Pg.363]


See other pages where Ionic existence is mentioned: [Pg.719]    [Pg.138]    [Pg.18]    [Pg.719]    [Pg.138]    [Pg.18]    [Pg.264]    [Pg.294]    [Pg.242]    [Pg.2515]    [Pg.2927]    [Pg.30]    [Pg.139]    [Pg.354]    [Pg.122]    [Pg.203]    [Pg.73]    [Pg.75]    [Pg.150]    [Pg.506]    [Pg.224]    [Pg.564]    [Pg.27]    [Pg.20]    [Pg.300]    [Pg.445]    [Pg.516]    [Pg.374]    [Pg.202]    [Pg.67]    [Pg.327]    [Pg.209]   
See also in sourсe #XX -- [ Pg.284 ]




SEARCH



Do completely ionic solids exist

The Existence and Interconversion of Type A Meso-ionic Isomers

© 2024 chempedia.info