Iodination hydrogen peroxide, acidic

Dithionates may be prepared by the electrolytic or chemical oxidation of sulfurous acid and sulfites. Chemical oxidation is accomplished by the action of chlorine, iodine, hydrogen peroxide, or oxygen in an acid medium by the action of chromates or permanganates in neutral solution - ... 

In what way does a solution of hydrogen peroxide react with (a) chlorine water, (b) potassium permanganate solution, (c) potassium dichromate solution, (d) hydrogen sulphide 50 cm of an aqueous solution of hydrogen peroxide were treated with an excess of potassium iodide and dilute sulphuric acid the liberated iodine was titrated with 0.1 M sodium thiosulphate solution and 20.0 cm were required. Calculate the concentration of the hydrogen peroxide solution in g 1" ... 

Chlorine, bromine and iodine form halic(V) acids but only iodic(V) acid, HIO3, can be isolated. Solutions of the chloric) V) and bromic) V) acids can be prepared by the addition of dilute sulphuric acid to barium chlorate(V) and bromate(V) respectively, and then filtering (cf. the preparation of hydrogen peroxide). These two acids can also be prepared by decomposing the corresponding halic(I) acids, but in this case the halide ion is also present in the solution. 

Addition of an oxidising agent to a solution of an iodide (for example concentrated sulphuric acid, hydrogen peroxide, potassium dichromate) yields iodine the iodine can be recognised by extracting the solution with carbon tetrachloride which gives a purple solution of iodine. 

C. HIO is prepared by oxidation of iodine with perchloric acid, nitric acid, or hydrogen peroxide or oxidation of iodine in aqueous suspension to iodic acid by silver nitrate. Iodic acid is also formed by anodic oxidation at a platinum electrode of iodine dissolved in hydrochloric acid (113,114). 

The Reich test is used to estimate sulfur dioxide content of a gas by measuring the volume of gas required to decolorize a standard iodine solution (274). Equipment has been developed commercially for continuous monitoring of stack gas by measuring the near-ultraviolet absorption bands of sulfur dioxide (275—277). The deterrnination of sulfur dioxide in food is conducted by distilling the sulfur dioxide from the acidulated sample into a solution of hydrogen peroxide, foUowed by acidimetric titration of the sulfuric acid thus produced (278). Analytical methods for sulfur dioxide have been reviewed (279). 

Pyridazinethiones are readily oxidized to the corresponding disulfides with iodine, aqueous iron(III) chloride, hydrogen peroxide in acetic acid, potassium permanganate in acetic acid, and upon long exposure to air. 

Developed methods have been checked up by analysis of kitchen salt which contains potassium iodate. Preliminary oxidation of iodate in the salt to periodate was performed by hydrogen peroxide in the acidic solution. The results of analysis coincide with certificate data of iodinated kitchen salt. 

Mercury, chlorine, calcium hypochlorite, iodine, bromine or hydrogen fluoride Acids, metal powders, flammable liquids, chlorates, nitrites, sulphur, finely-divided organics or combustibles Nitric acid, hydrogen peroxide... 

The most characteristic property of the oxaziranes is tlieir strong oxidizing character which is approximately equal to that of hydrogen peroxide. Oxaziranes react with hydrochloric acid the chlorine thus liberated is, however, used up in secondary reactions. " Two equivalents of iodine are formed from acid iodide solutions according to Eq. Titration of the free iodine allows a simple estimation of... 

Better results are obtained by transferring 25.0 mL of the diluted hydrogen peroxide solution to a conical flask, and adding 100 mL 1M(1 20) sulphuric acid. Pass a slow stream of carbon dioxide or nitrogen through the flask, add 10 mL of 10 per cent potassium iodide solution, followed by three drops of 3 per cent ammonium molybdate solution. Titrate the liberated iodine immediately with standard 0.1M sodium thiosulphate in the usual way. 

Chlorination and bromination of chlorins can be carried out with aqueous hydrochloric or hydrobromic acid in the presence of hydrogen peroxide, but also with free chlorine or bromine in solution. Depending on the stoichiometric amount of halogenation agent, mono-or bishalogenated products are selectively formed as in the case of octaethylchlorin 15, Attempts to iodinate chlorins have been unsuccessful. 

Iodo-p-xylene has been prepared by the action of potassium iodide on diazotized p-xylidine (2,5-dimethylbenzenamine) (21% yield),5 from p-xylene with molecular iodine in concentrated nitric acid (50% yield)6 or in ethanol-sulfuric acid in the presence of hydrogen peroxide (64% yield),7 and with molecular iodine in glacial acetic acid-sulfuric acid in the presence of iodie acid as a catalyst (85% yield).8... 

The preparation of Pans-1,2-cyclohexanediol by oxidation of cyclohexene with peroxyformic acid and subsequent hydrolysis of the diol monoformate has been described, and other methods for the preparation of both cis- and trans-l,2-cyclohexanediols were cited. Subsequently the trans diol has been prepared by oxidation of cyclohexene with various peroxy acids, with hydrogen peroxide and selenium dioxide, and with iodine and silver acetate by the Prevost reaction. Alternative methods for preparing the trans isomer are hydroboration of various enol derivatives of cyclohexanone and reduction of Pans-2-cyclohexen-l-ol epoxide with lithium aluminum hydride. cis-1,2-Cyclohexanediol has been prepared by cis hydroxylation of cyclohexene with various reagents or catalysts derived from osmium tetroxide, by solvolysis of Pans-2-halocyclohexanol esters in a manner similar to the Woodward-Prevost reaction, by reduction of cis-2-cyclohexen-l-ol epoxide with lithium aluminum hydride, and by oxymercuration of 2-cyclohexen-l-ol with mercury(II) trifluoro-acetate in the presence of ehloral and subsequent reduction. ... 

Oxathiine derivatives lb 301,304 Oxathizine fungicides la 44 Oxazepam la 364 Oxazolidinthione derivatives lb 301 Oxeladine citrate lb 327 Oxidation, aluminium isopropoxide la 59 -, atmospheric oxygen la 60 -, chromic acid la 59, 60 -, hydrogen peroxide la 59 -, iodine la 60... 

These and similar results can be explained if the simultaneous reduction of hydrogen peroxide is due to an induced reaction. To show the characteristic features of this reaction some results are presented in Table 19 and Table 20. The procedure for these measurements was as follows. The solution of peroxy compounds given in columns 1 and 2 was made up to 20 ml and the pH was adjusted to the given value. Then potassium thiocyanate solution was added and, after the reaction time noted, the process was quenched by adding potassium iodide solution (0.3 g KI). After 5 sec the solution was acidified with 1 ml 2 iV sulphuric acid then using, molybdate catalyst solution, the iodine liberated was titrated with standard thiosulphate. 

Liquid-liquid reactions occur between two or more liquid phases whereby a system consisting of an organic and an aqueous phase is applied most frequently. Usually reaction takes place in one phase only. Phase-transfer catalysts are sometimes used to make transfer of a reactant to the reacting phase easier. Among typical liquid-liquid reactions utilized in fine chemicals manufacture are nitrations with mixtures of nitric and sulphuric acid, conventional hydroxylations performed with hydrogen peroxide, esterifications, alkylations, brominations, and iodinations. 

A mixture of 1,4-dioxane and water is often used as the solvent for the conversion of aldehydes and ketones by H2Se03 to a-dicarbonyl compounds in one step (Eq. 8.117).331 Dehydrogenation of carbonyl compounds with selenium dioxide generates the a, (i-unsaturated carbonyl compounds in aqueous acetic acid.332 Using water as the reaction medium, ketones can be transformed into a-iodo ketones upon treatment with sodium iodide, hydrogen peroxide, and an acid.333 Interestingly, a-iodo ketones can be also obtained from secondary alcohol through a metal-free tandem oxidation-iodination approach. 

The first reported porphyrin complexes of platinum(IV) date from 1980 and were obtained by hydrogen peroxide oxidation of platinum(II) porphyrin complexes in an acidic medium (HC1).479 Since then oxidation of platinum(II) complexes of other porphyrins has been achieved by the same method,480 and by chlorine,481 or bromine482 oxidation. Reaction with iodine did not lead to oxidation and treatment of platinum(IV) porphyrin complexes with iodide resulted in reduction to platinum(II). 

The oxidative cyclization of thioacylamidines 83 is one of the best methods for the synthesis of unsymmetrical 3,5-diaryl- or dialkyl-1,2,4-thiadiazoles 84 (Equation 23) <2004HOU277>. Typical oxidants used in the cyclization step include bromine, iodine, or nitric acid, and, more recently, hydrogen peroxide in the presence of perchloric acid has been used. N-Substituted thioacylamidines give rise to 1,2,4-thiadiazolium salts <1997JOC3480>. 

Ethyl sulfate Flammable liquids Fluorine Formamide Freon 113 Glycerol Oxidizing materials, water Ammonium nitrate, chromic acid, the halogens, hydrogen peroxide, nitric acid Isolate from everything only lead and nickel resist prolonged attack Iodine, pyridine, sulfur trioxide Aluminum, barium, lithium, samarium, NaK alloy, titanium Acetic anhydride, hypochlorites, chromium(VI) oxide, perchlorates, alkali peroxides, sodium hydride... 

A number of agents have been used to disinfect pressure sores (e.g., povidone-iodine, iodophor, sodium hypochlorite, hydrogen peroxide, and acetic acid) as well as other types of open wounds however, these agents should be avoided as they impair healing. 

---