Interfacial layer, properties

In our work we have attempted to determine the relationship between interfacial layer properties and water-in-oil emulsion stability. For this objective, physico-chemical properties of surfactants (stabilizing agents), properties of emulsified hydrocarbon films and rheological properties of interfacial layers must be studied. The results of the study may lead to recommendations for preparing high-stability systems for commercial well-drilling. 

Thus, effects of the surfaces can be studied in detail, separately from effects of counterions or solutes. In addition, individual layers of interfacial water can be analyzed as a function of distance from the surface and directional anisotropy in various properties can be studied. Finally, one computer experiment can often yield information on several water properties, some of which would be time-consuming or even impossible to obtain by experimentation. Examples of interfacial water properties which can be computed via the MD simulations but not via experiment include the number of hydrogen bonds per molecule, velocity autocorrelation functions, and radial distribution functions. 

What is the likely future use of MC and MD techniques for studying interfacial systems Several promising approaches are possible. Continued investigation of double layer properties, "hydration forces", "hydrophobic effects", and "structured water" are clearly awaiting the development of improved models for water-water, solute-water, surface-water, and surface-solute potentials. 

The presence of a low-viscosity interfacial layer makes the determination of the boundary condition even more difficult because the location of a slip plane becomes blurred. Transitional layers have been discussed in the previous section, but this is an approximate picture, since it stiU requires the definition of boundary conditions between the interfacial layers. A more accurate picture, at least from a mesoscopic standpoint, would include a continuous gradient of material properties, in the form of a viscoelastic transition from the sohd surface to the purely viscous liquid. Due to limitations of time and space, models of transitional gradient layers will be left for a future article. 

Surface and Double-layer Properties Valette [19] has analyzed earlier experimental data on the inner-layer capacity at PZC for Ag(lll), Ag(lOO), and Ag(llO) surfaces in order to estimate the surface area and capacitance contributions of superficial defects for real electrodes, as compared to ideal faces. Considering the application of surface spectroscopy techniques to single-crystal Ag electrodes, one should note that anisotropy of the SHG response for metal electrode allows one to analyze and correlate its pattern with interfacial symmetries and its variations by changing nonlinear susceptibility and the surface structure. Early studies on Ag(lll) single-crystal electrodes have... 

Another characteristic property of many biopolymers (proteins, modified starch, chitosan, etc.) which is useful for the encapsulation of bioactive molecules is their ability to adsorb at the oil-water interface and to form adsorbed layers that are capable of stabilizing oil-in-water (OAV) emulsions against coalescence (see Table 2.2). It is worthwhile to note here that the formation of an emulsion is one of the key steps in the encapsulation of hydrophobic nutraceuticals by the most common technique used nowadays in the food industry (spray-drying). The adsorption of amphiphilic biopolymers at the oil-water interface involves the attachment of their hydrophobic groups to the surface of the oil phase (or even their slight penetration into it), whilst their hydrophilic parts protrude into the aqueous phase providing a bulky interfacial layer. 

In addition to these experimental methods, there is also a role for computer simulation and theoretical modelling in providing understanding of structural and mechanical properties of mixed interfacial layers. The techniques of Brownian dynamics simulation and self-consistent-field calculations have, for example, been used to some advantage in this field (Wijmans and Dickinson, 1999 Pugnaloni et al., 2003a,b, 2004, 2005 Parkinson et al., 2005 Ettelaie et al., 2008). 

Bos, M.A., van Vliet, T. (2001). Interfacial rheological properties of adsorbed protein layers and surfactants. Advances in Colloid and Interface Science, 91, 437-471. 

Protein-polysaccharide complexation affects the surface viscoelastic properties of the protein interfacial layer. Surface shear rheology is especially sensitive to the strength of the interfacial protein-polysaccharide interactions. Experimental data on BSA+ dextran sulfate (Dickinson and Galazka, 1992), asi-casein + high-methoxy pectin (Dickinson et al., 1998), p-lactoglobulin + low-methoxy pectin (Ganzevles et al., 2006), and p-lactoglobulin + acacia gum (Schmitt et al., 2005) have all demon-... 

The major conclusion is that again although the nominal bulk properties of fiber and matrix are the same for the two systems investigated, the presence of a small interfacial layer of different composition had very large effects on the interfacial properties. 

Leidheiser 9l) has proposed numerous methods of attack which can be used in an attempt to prevent or minimize the corrosion-induced delamination of polymer coatings from metal substrates. All of these methods involve the control of the chemical and physical properties of the interfacial layer between the coating and the metal substrate. Three of these methods are discussed in Sections 6.3.3-6.3.5. 

This striking property of the Al203/SiC interface can be understood in terms of the observation of Ashby and Centamore [14] that the more refractory of two phases at an interface (the covalently bonded SiC in this case) controls the interface reaction because in general atoms in both phases must be involved in the reaction. The majority of the Al203/SiC interfaces in the nanocomposites have been observed to be free of any glassy phase, the presence of which would presumably allow alumina to be removed or deposited at the interface without the involvement of the SiC, and consequently much more rapidly. The introduction of an interfacial layer may be the source of the ability of sintering aids such as Y203 to enable these materials to be pressurelessly sintered [15, 16] (Fig. 4.2). 

Mechanical properties of the interfacial layer between two fluid phases can be tension expressed in terms of those of a geometrical surface of uniform tension called the surface tension. 

In proton T2 experiments conducted by Litvinov [18] a strong dynamic heterogeneity in the fraction of EPDM bound to carbon black could also be detected an immobilised EPDM layer covering the carbon black surfaces and a mobile EPDM part outside of this interfacial layer. In dynamic-mechanical experiments by Haidar [19], it was found that the polymer layer on the filler surface had glass-like mechanical properties. 

Marosi, G., Bertalan, G., Rusznak, I., and Anna, P. 1986. Role of interfacial layers in the properties of particle-filled polyolefin systems. Colloids and Surfaces 23 185-98. 

The interfacial layer is the inhomogeneous space region intermediate between two bulk phases in contact, and where properties are notably different from, but related to, the properties of the bulk phases (see Figure 6.1). Some of these properties are composition, molecular density, orientation or conformation, charge density, pressure tensor, and electron density [2], The interfacial properties change in the direction normal to the surface (see Figure 6.1). Complex profiles of interfacial properties take place in the case of multicomponent systems with coexisting bulk phases where attractive/repulsive molecular interactions involve adsorption or depletion of one or several components. 

---