Interactions calorimetry

ATBN - amine terminated nitrile rubber X - Flory Huggins interaction parameter CPE - carboxylated polyethylene d - width at half height of the copolymer profile given by Kuhn statistical segment length DMAE - dimethyl amino ethanol r - interfacial tension reduction d - particle size reduction DSC - differential scanning calorimetry EMA - ethylene methyl acrylate copolymer ENR - epoxidized natural rubber EOR - ethylene olefin rubber EPDM - ethylene propylene diene monomer EPM - ethylene propylene monomer rubber EPR - ethylene propylene rubber EPR-g-SA - succinic anhydride grafted ethylene propylene rubber... 

Using calorimetry to estimate the degree of filler-polymer interaction as described in [99] the authors of [318, 319] determined that the filler reaction with PVC is exothermic, which is indicative of a stronger bond in the polymer-filler system. No thermal effect was noted for mechanical mixtures, except for a few cases where it was endothermal. 

Van der Merwe A (2001) In Harding SE, Chowdhry BZ (eds) Protein-Ligand Interactions Hydrodynamics and Calorimetry. Oxford University Press, Oxford, UK, 137... 

As a complement to any (and perhaps all) of the above methods, calorimetry can be utilized in developing an understanding of the overall energetic behavior of the binding event [20]. The overall thermodynamics of any molecular interaction is the sum of both the enthalpic and entropic energy components of the species involved [21]. While these measurements have historically been somewhat limited due to a requirement for a significant amount of protein, new techniques have alleviated the situation substantially [22]. 

It must be acknowledged, however, that the determination of the number of the different surface species which are formed during an adsorption process is often more difficult by means of calorimetry than by spectroscopic techniques. This may be phrased differently by saying that the resolution of spectra is usually better than the resolution of thermograms. Progress in data correction and analysis should probably improve the calorimetric results in that respect. The complex interactions with surface cations, anions, and defects which occur when carbon monoxide contacts nickel oxide at room temperature are thus revealed by the modifications of the infrared spectrum of the sample (75) but not by the differential heats of the CO-adsorption (76). Any modification of the nickel-oxide surface which alters its defect structure produces, however, a change of its energy spectrum with respect to carbon monoxide that is more clearly shown by heat-flow calorimetry (77) than by IR spectroscopy. 

It is evident, however, from the preceding examples that the detailed analysis of surface interactions by means of adsorption calorimetry is... 

In the various sections of this article, it has been attempted to show that heat-flow calorimetry does not present some of the theoretical or practical limitations which restrain the use of other calorimetric techniques in adsorption or heterogeneous catalysis studies. Provided that some relatively simple calibration tests and preliminary experiments, which have been described, are carefully made, the heat evolved during fast or slow adsorptions or surface interactions may be measured with precision in heat-flow calorimeters which are, moreover, particularly suitable for investigating surface phenomena on solids with a poor heat conductivity, as most industrial catalysts indeed are. The excellent stability of the zero reading, the high sensitivity level, and the remarkable fidelity which characterize many heat-flow microcalorimeters, and especially the Calvet microcalorimeters, permit, in most cases, the correct determination of the Q-0 curve—the energy spectrum of the adsorbent surface with respect to... 

Moreover, the use of heat-flow calorimetry in heterogeneous catalysis research is not limited to the measurement of differential heats of adsorption. Surface interactions between adsorbed species or between gases and adsorbed species, similar to the interactions which either constitute some of the steps of the reaction mechanisms or produce, during the catalytic reaction, the inhibition of the catalyst, may also be studied by this experimental technique. The calorimetric results, compared to thermodynamic data in thermochemical cycles, yield, in the favorable cases, useful information concerning the most probable reaction mechanisms or the fraction of the energy spectrum of surface sites which is really active during the catalytic reaction. Some of the conclusions of these investigations may be controlled directly by the calorimetric studies of the catalytic reaction itself. 

T. K. Dam and C. F. Brewer, Thermodynamic studies of lectin-carbohydrate interactions by isothermal titration calorimetry, Chem. Rev., 102 (2002) 387 -29. 

It was recognized quite some time ago that DTA analysis could be used to deduce the compatibility between a drug substance and its excipients in a formulation. The effect of lubricants on performance was as problematic then as it is now, and DTA proved to be a powerful method in the evaluation of possible incompatibilities. Jacobson and Reier used DTA to study the interaction between various penicillins and stearic acid [17]. For instance, the addition of 5% stearic acid to sodium oxacillin monohydrate completely obliterated the thermal events associated with the antibiotic. Since that time, many workers employed DTA analysis in the study of drug-excipient interactions, although the DTA method has been largely replaced by differential scanning calorimetry technology. 

Further experiments focused therefore on [RuCl(en)(r 6-tha)]+ (12) and [RuCl(rj6-p-cym)(en)]+ (22), which represent the two different classes, and their conformational distortion of short oligonucleotide duplexes. Chemical probes demonstrated that the induced distortion extended over at least seven base pairs for [RuCl(rj6-p-cym)(en)]+ (22), whereas the distortion was less extensive for [RuCl(en)(rj6-tha)]+ (12). Isothermal titration calorimetry also showed that the thermodynamic destabilization of the duplex was more pronounced for [RuCl(r 6-p-cym)(en)]+ (22) (89). DNA polymerization was markedly more strongly inhibited by the monofunctional Ru(II) adducts than by monofunctional Pt(II) compounds. The lack of recognition of the DNA monofunctional adducts by HMGB1, an interaction that shields cisplatin-DNA adducts from repair, points to a different mechanism of antitumor activity for the ruthenium-arenes. DNA repair activity by a repair-proficient HeLa cell-free extract (CFE) showed a considerably lower level of damage-induced DNA repair synthesis (about six times) for [RuCl(en)(rj6-tha)] + compared to cisplatin. This enhanced persistence of the adduct is consistent with the higher cytotoxicity of this compound (89). 

Siderophore-ionophore supramolecular assembly formation via host-guest complexation of the pendant protonated amine arm of ferrioxamine B has been confirmed by X-ray crystallography (Fig. 28) (203). The stability and selectivity of this interaction as a function of ionophore structure, metal ion identity, and counter anion identity were determined by liquid-liquid extraction, isothermal calorimetry, and MS (204 -211). Second-sphere host-guest complexation constants fall in the range 103— 106M-1 in CHC13 and methanol depending on ionophore structure. 

Thermal methods have found extensive use in the past as part of a program of preformulation studies, since carefully planned work can be used to indicate the existence of possible drug-excipient interactions in a prototype formulation [2], It should be noted, however, that the use of differential scanning calorimetry (DSC) for such work is less in vogue than it used to be. Nevertheless, in appropriately designed applications, thermal methods of analysis can be used to evaluate compound purity,... 

The word energetics, rather than thermochemistry, was adopted in figure 1.2 and in the book title to emphasize that most of the methods displayed do not involve the experimental determination of heat. Furthermore, the use of energetics avoids the traditional link between thermochemistry and calorimetry (which is semantically correct because thermo is the Greek designation for heat ). The word molecular, on the other hand, stresses that this book will be mainly concerned with single molecules. Properties like enthalpies of phase transition, which depend on intermolecular interactions, are very important data in their own right, but the methods used to derive them will not be comprehensively covered. 

---