Hydroxyls solvent for

DMSO can be used as a dipolar non-hydroxylic solvent for the measurement of pKa values for various phenols bearing strongly electron-withdrawing substituents. These acidity scales in DMSO have been correlated with those in H20 or in the gas phase92. 

They have been used in some cases for providing additional evidence in distinguishing nitrogen inversion from other rate processes (internal rotation, ring inversion), the idea being that these other processes are probably less sensitive to a change from non-hydroxylic to hydroxylic solvent (for instance, hexane to water) than nitrogen inversion itself (see for instance 71a>82>124,125,136) see also 76>). 

DehydrohalogettatUm and related eliminations. DMSO is superior to hydroxylic solvents for dehydrohalogenation with potassium t-butoxide.The bis-ethylene-ketal (I) could not be converted satisfactorily into (2) with potassium t-butoxide... 

Type (a) reactions are notable because of an unexplained effectiveness of halogenated solvents in increasing the rate. Little is known about kinetics of 1,3-cycloadditions in hydroxylic solvents for type (a) and (e) reactions ethanol seems as good a medium as other solvents. 

Picrates, Many aromatic hydrocarbons (and other classes of organic compounds) form molecular compounds with picric acid, for example, naphthalene picrate CioHg.CgH2(N02)30H. Some picrates, e.g., anthracene picrate, are so unstable as to be decomposed by many, particularly hydroxylic, solvents they therefore cannot be easily recrystaUised. Their preparation may be accomplished in such non-hydroxylic solvents as chloroform, benzene or ether. The picrates of hydrocarbons can be readily separated into their constituents by warming with dilute ammonia solution and filtering (if the hydrocarbon is a solid) through a moist filter paper. The filtrate contains the picric acid as the ammonium salt, and the hydrocarbon is left on the filter paper. 

Chemical Grafting. Polymer chains which are soluble in the suspending Hquid may be grafted to the particle surface to provide steric stabilization. The most common technique is the reaction of an organic silyl chloride or an organic titanate with surface hydroxyl groups in a nonaqueous solvent. For typical interparticle potentials and a particle diameter of 10 p.m, steric stabilization can be provided by a soluble polymer layer having a thickness of - 10 nm. This can be provided by a polymer tail with a molar mass of 10 kg/mol (25) (see Dispersants). 

Other derivatives can be prepared by reaction of the alcohol with an acid anhydride. For example, phthalic or 3-nitrophthalic anhydride (I mol) and the alcohol (Imol) are refluxed for half to one hour in a non-hydroxylic solvent, e.g. toluene or alcohol-free chloroform, and then cooled. The phthalate ester crystallises out, is precipitated by the addition of low boiling petroleum ether or is isolated by ev toration of the solvent. It is recrystallised from water, 50% aqueous ethanol, toluene or low boiling petroleum ether. Such an ester has a characteristic melting point and the alcohol can be recovered by acid or alkaline hydrolysis. 

Solid esters are easily crystallisable materials. It is important to note that esters of alcohols must be recrystallised either from non-hydroxylic solvents (e.g. toluene) or from the alcohol from which the ester is derived. Thus methyl esters should be crystallised from methanol or methanol/toluene, but not from ethanol, n-butanol or other alcohols, in order to avoid alcohol exchange and contamination of the ester with a second ester. Useful solvents for crystallisation are the corresponding alcohols or aqueous alcohols, toluene, toluene/petroleum ether, and chloroform (ethanol-free)/toluene. Esters of carboxylic acid derived from phenols... 

We consider first the Sn2 type of process. (In some important Sn2 reactions the solvent may function as the nucleophile. We will treat solvent nucleophilicity as a separate topic in Chapter 8.) Basicity toward the proton, that is, the pKa of the conjugate acid of the nucleophile, has been found to be less successful as a model property for reactions at saturated carbon than for nucleophilic acyl transfers, although basicity must have some relationship to nucleophilicity. Bordwell et al. have demonstrated very satisfactory Brjinsted-type plots for nucleophilic displacements at saturated carbon when the basicities and reactivities are measured in polar aprotic solvents like dimethylsulfoxide. The problem of establishing such simple correlations in hydroxylic solvents lies in the varying solvation stabilization within a reaction series in H-bond donor solvents. 

When the range of chemieal types is restricted, regular behavior is often observed. For example, one might choose to study a series of hydroxylic solvents, thus holding approximately constant the H-bonding capabilities within the series. This is a motivation, also, for solvent studies in a series of binary mixed solvents, often an organic-aqueous mixture whose composition may be varied from pure water to pure organic. Mukerjee et al. defined a quantity H for hydroxylic and mixed hydroxyiic-water solvents by Eq. (8-17). 

Thus the reactions of cyclic or acyclic enamines with acrylic esters or acrylonitrile can be directed to the exclusive formation of monoalkylated ketones (3,294-301). The corresponding enolate anion alkylations lead preferentially to di- or higher-alkylation products. However, by proper choice of reaction conditions, enamines can also be used for the preferential formation of higher alkylation products, if these are desired. Such reactions are valuable in the a substitution of aldehydes, which undergo self-condensation in base-catalyzed reactions (117,118). Monoalkylation products are favored in nonhydroxylic solvents such as benzene or dioxane, whereas dialkylation products can be obtained in hydroxylic solvents such as methanol. The difference in products can be ascribed to the differing fates of an initially formed zwitterionic intermediate. Collapse to a cyclobutane takes place in a nonprotonic solvent, whereas protonation on the newly introduced substitutent and deprotonation of the imonium salt, in alcohol, leads to a new enamine available for further substitution. 

Reactions with uncharged species such as amines, alcohols, and water offer frequent opportunities for investigations under pseudo-first-order conditions since many of these reagents are suitable solvents. However, the reactions with amines have often been investigated in alcohols and in non-hydroxylic solvents 27-29a have been found to follow second-order kinetics. 

Note Generally speaking, this appears to be the most satisfactory reagent for N-oxidations it is not only reasonably stable but also used in chloroform or methylene dichloride, thus avoiding the formation of byproducts occasioned by the use of reagents that require hydroxylic solvents. 

In these solvents at sufficiently low Br2 concentration (< 10-3 m) the kinetics are first order both in the olefin and in Br2 and the main solvent effect consists of an electrophilic solvation of the departing Br ion. A nucleophilic assistance by hydroxylic solvents has also been recognized recently (ref. 26) (Scheme 10). So far, return during the olefin bromination in methanol had been admitted only for alkylideneadamantanes, and was ascribed to steric inhibition to nucleophilic attack at carbons of the bromonium ion (ref. 26). 

In nonpolar solvents, for example alcohols, the hydroxyls of the support can also be used to anchor alkoxy compounds to the surface in a condensation reaction, in which one alkoxy ligand reacts with the proton of the surface OH to give the corresponding alcohol, and the complex binds to the support. An example is the anchoring of zirconium ethoxide, Zr(OC2H5)4, to silica by means of the reaction... 

For reactions that are traditionally performed in hydroxylic solvents or in polar aprotic solvents, PTC has the following advantages no need for expensive aprotic solvents, shorter reaction time and/or lower reaction temperature, use of aqueous alkali hydroxides instead of other expensive bases. Several examples are given in Section 4.2.2. 

However, when considering the use of acid or base in organic solvents for sample extraction, care must be taken to avoid potential artifacts that may arise from side reactions. For example, methylation of active hydroxyl groups or acidic functions on the analyte may sometimes occur when acidic methanol is used as the extractant. Another example is acetylation of an active alcohol on the analyte following partition of the analyte into ethyl acetate from aqueous solution acidified with glacial acetic acid. 

The general mechanistic features of the aldol addition and condensation reactions of aldehydes and ketones were discussed in Section 7.7 of Part A, where these general mechanisms can be reviewed. That mechanistic discussion pertains to reactions occurring in hydroxylic solvents and under thermodynamic control. These conditions are useful for the preparation of aldehyde dimers (aldols) and certain a,(3-unsaturated aldehydes and ketones. For example, the mixed condensation of aromatic aldehydes with aliphatic aldehydes and ketones is often done under these conditions. The conjugation in the (3-aryl enones provides a driving force for the elimination step. 

Scheme 2.11 shows some examples of Robinson annulation reactions. Entries 1 and 2 show annulation reactions of relatively acidic dicarbonyl compounds. Entry 3 is an example of use of 4-(trimethylammonio)-2-butanone as a precursor of methyl vinyl ketone. This compound generates methyl vinyl ketone in situ by (3-eliminalion. The original conditions developed for the Robinson annulation reaction are such that the ketone enolate composition is under thermodynamic control. This usually results in the formation of product from the more stable enolate, as in Entry 3. The C(l) enolate is preferred because of the conjugation with the aromatic ring. For monosubstituted cyclohexanones, the cyclization usually occurs at the more-substituted position in hydroxylic solvents. The alternative regiochemistry can be achieved by using an enamine. Entry 4 is an example. As discussed in Section 1.9, the less-substituted enamine is favored, so addition occurs at the less-substituted position. 

Cyanide ion acts as a carbon nucleophile in the conjugate addition reaction. The pK of HCN is 9.3, so addition in hydroxylic solvents is feasible. An alcoholic solution of potassium or sodium cyanide is suitable for simple compounds. 

---