Hydroxy-terminated polyethylene

Recently, interest in polymer-coated silica phases has been renewed, with investigators (Chen and Lee [2]) exploring the use of more efficient deactivation techniques and more polar polymers to coat silica particles for neat CO2 chromatography. Polyethyl-eneimine-coated silica and amino-terminated polyethylene oxide-coated silica appear promising for pSFC of moderately polar basic compounds. Similarly, hydroxy-terminated polyethylene-oxide-coated silica has been used successfully for pSFC of alcohols and acids. Optimization and commercial production of these stationary phases could significantly extend the polarity range of compounds that can be chromatographed with neat supercritical CO2. 

Ethylene polymerized with diethyl peroxydicarbonate contains terminal ester groups (41). Using C-labeled cyclohexane peroxydicarbonate, the fate of the primary radicals during the polymerization of methyl methacrylate (MMA) and styrene has been studied (42). Although this reference includes no detailed analysis of the products, it indicates that ROOCO-terminated polystyrene telechelics may be obtained by this technique. A similar method has been used for the preparation of telechelic polybutadiene (43). The carbonate end groups are easily modified into terminal hydroxyl groups by hydrolysis. Hydrogenation of the carbonate functionahzed telechelic polybutadiene, followed by hydrolysis, srields hydroxy-terminated polyethylene telechelics. 

Many examples exist where a polymerization has been continued by ATRP. V" Often the procedure involves functionalization of a hydroxy-terminated polymer with bromoisobutyroyl (BriBBr, 314) or bromoisopropionoyl (BriPBr, 315) bromide. Examples include polyethylene oxide)044,646 and polypropylene... 

The anionic method of polymerization is most useful for the synthesis of low molecular weight hydroxy-terminated oligomers and polymers that are to be further processed. For example, the treatment of hydroxy-terminated oligomers with isocyanates has been used to obtain polyester-urethanes (9,20), while triblock copolymers (PCL-PEG-PCL) are prepared by initiating the polymerization of e-caprolactone with the disodium alcoholate from polyethylene glycol (26). 

II. B polyethylene glycol, ethylene oxide, polystyrene, diisocyanates (urethanes), polyvinylchloride, chloroprene, THF, diglycolide, dilac-tide, <5-valerolactone, substituted e-caprolactones, 4-vinyl anisole, styrene, methyl methacrylate, and vinyl acetate. In addition to these species, many copolymers have been prepared from oligomers of PCL. In particular, a variety of polyester-urethanes have been synthesized from hydroxy-terminated PCL, some of which have achieved commercial status (9). Graft copolymers with acrylic acid, acrylonitrile, and styrene have been prepared using PCL as the backbone polymer (60). 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

Chlorinated paraffins, which contain up to 60-70% chlorine, are low in cost and are used as secondary plasticizer in PVC wire and cable insulations. Perchlorobicyclopentadiene has little plasticizing action and is used in polyethylene. Some of the more expensive bromine-containing fire retardants which have been used in the ratio of 5 p.p.h. in polystyrene foam, may be reduced to 0.5 p.p.h. by adding synergists such as peroxides or nitroso compounds. The reaction-type retardants, such as chlorendic acid and anhydride, hydroxy-terminated phosphonated esters, and specific brominated aliphatic esters, are admixed to rigid and flexible polyurethane foams, reinforced polyesters, phenolics, and epoxy resins. 

Polymethylmethacrylate Polystyrene Polyvinyl alcohol Polypropylene Polyacrylonitrile Polyvinyl chloride Nitrocellulose Polyethylene Polytetrafluorethylene Poly a methyl styrene Hydroxy-terminated polybutadiene filled with ammonium perchlorate Hydroxy-terminated polybutadiene filled with potassium chloride Nylon 66... 

Interlinking hydroxy-terminated, low molecular weight polyesters with polyethylene glycol using dicarboxylic acid anhydride and a carbodiimide. Almost all of the solid PEG-based copolyesters were developed for use as carriers for the controlled release of bioachve agents. 

CAS 64365-23-7 68937-54-2 68938-54-5 Synonyms Dimethylmethyl (polyethylene oxide) siloxane Dimethylsilox-ane/glycol copolymer Polyoxyethylene-grafted polydimethylsiloxane Polysiloxane polyether copolymer Siloxanes and silicones, dimethyl, hydroxy-terminated, ethoxylated propoxylated Classification Silicone glycol surfactant... 

In the PU synthesis we started from one mole of hydroxy-terminated macro-diol which was either a polyester type—polyethylene adipate (PEA) or a polyether type—polytetrahydrofuran (PTHF). 

Various workers have discussed aspects other than those mentioned above in studies of the viscoelastic properties of polymers. These include PVOH [62], hydroxy-terminated polybutadiene [63], styrene-butadiene and neoprene-type blends [64], and polyamidoimides [65]. Other aspects of viscoelasticity that have been studied include relaxation phenomena in PP [66] and methylmethacrylate-N-methyl glutarimide copolymers [67], shear flow of high-density polyethylene [68], Tg of PMMA and its copolymers with N-substituted maleimide [69] and ethylene-vinyl acetate copolymers [70], and creep behaviour of poly(p-phenylene terephthalate) [71] and PE [72]. 

To improve the performances of a monopropellant engine and reduce the risk linked to the simultaneous presence of an oxidizer and a fuel for the long term storage, the oxidizer can be use alone and after decomposition, the hot gaseous oxygen can burn a solid fuel grain in a hybrid solid/liquid engine (Fig. 13). The proposed IL oxidizers can be concentrated aqueous solution of HAN (hydroxylammonium nitrate) or HAN plus AN (ammonium nitrate) and the fuel polyethylene or HTPB (hydroxy-terminated polybutadiene) (Biddle Sutton, 1985 Ramohalli Dowler, 1995). 

IR spectroscopy has very limited application to the determination of hydroxy groups in polyacrylamides [25, 26] carboxy terminated butadienes [27] and polyethylene. 

---