Hydroxide, potassium reduction

Detailed investigations of the chemical reactivity of the diketiminato-stabilized phosphenium cations like 28 (Scheme 17) are to date rare and include only two reports dealing with the substitution and reduction of P-halogen-derivatives. Thus, reaction of 28 (X=Br) with sodium hydroxide in toluene was reported to proceed with displacement of the halide substituent at phosphorus and conservation of the heterocyclic ring to give a mixture of bromide and triflate salts containing a P-hydroxy-substituted cation, both of which were isolated in small yields [89], The products are remarkable as they represent one of very few examples of a stable phosphinous acid which does not rearrange to the tautomeric secondary phosphine oxide. Potassium reduction of the P-chloro-substituted derivative 34 produced the... 

A second synthesis for the preparation of 2H5V (29) starts by condensation of o-nitrobenzenediazonium chloride withT-hydroxyaceto-phenone. The azo compound was reduced with zinc and sodium hydroxide without reduction of the carbonyl group of the acetyl group. After acetylation, 2(2-acetoxy-5-acetylphenyl)2H-benzotriazole (2A5A) was reduced with sodium borohydride and the secondary alcohol was dehydrated with potassium hydrogen sulfate after hydrolysis, 2H5V was... 

The N-chlorosulfonyl -lactams can also be reduced in very high yield to /3-lactams by an aqueous solution of sodium sulfite (Na2SOrl) and ether, the aqueous phase is kept slightly basic by addition of potassium hydroxide during reduction.3... 

S 129), and 3-hydrazinopyridazines are reduced to the corresponding amines (80S830). With nickel-aluminum alloy in potassium hydroxide solution, reduction proceeds with N—N bond cleavage to the 1,4-diaminobutanes (87JOC1043). Similarly, 1,2,3,6-tetrahydropyridazines were cleaved hydrogenolytically and transformed into a derivative of 2,5-diamino-2,5-didesoxyribose (80LA1307). 

A method of almost universal applicability for the deoxygenation of carbonyl compounds is the Wolff-Kishner reduction While the earlier reductions were carried out in two steps on the derived hydrazone or semicarbazone derivatives, the Huang-Minlon modification is a single-pot operation. In this procedure, the carbonyl compound and hydrazine (hydrate or anhydrous) are heated (180-220 °C) in the presence of a base and a proton source. Sodium or potassium hydroxide, potassium-t-butoxide and other alkoxides are the frequently used bases and ethylene glycol or its oligomers are used as the solvent and proton source. Over the years, several modifications of this procedure have been used to cater to the specific needs of a given substrate. The Wolff-Kishner reaction works well with both aldehydes and ketones and remains the most routinely used procedure for the preparation of alkanes from carbonyl compounds (Table 9). This method is equally suitable for the synthesis of polycyclic and hindered alkanes. 

Wolff - Kishner reduction of aldehydes and ketones. Upon heating the hydrazoiie or semicarbazone of an aldehyde or ketone with potassium hydroxide or with sodium ethoxide solution (sealed tube), the corresponding hydrocarbon is obtained ... 

Reduction of A-nitrosomethylaniline. Into a 1 litre round-bottomed flask, fitted with a reflux condenser, place 39 g. of A-nitroso-methylaniline and 75 g. of granulated tin. Add 150 ml. of concentrated hydrochloric acid in portions of 25 ml. (compare Section IV.34) do not add the second portion until the vigorous action produced by the previous portion has subsided, etc. Heat the reaction mixture on a water bath for 45 minutes, and allow to cool. Add cautiously a solution of 135 g. of sodium hydroxide in 175 ml. of water, and steam distil (see Fig. II, 40, 1) collect about 500 ml. of distillate. Saturate the solution with salt, separate the organic layer, extract the aqueous layer with 50 ml. of ether and combine the extract with the organic layer. Dry with anhydrous potassium carbonate, remove the ether on a water bath (compare Fig. II, 13, 4), and distil the residual liquid using an air bath (Fig. II, 5, 3). Collect the pure methylaniline at 193-194° as a colourless liquid. The yield is 23 g. 

Potassium is never found free in nature, but is obtained by electrolysis of the hydroxide, much in the same manner as prepared by Davy. Thermal methods also are commonly used to produce potassium (such as by reduction of potassium compounds with CaC2, C, Si, or Na). 

Two methods for converting carbonyl groups to methylene units are the Clem mensen reduction (zinc amalgam and con centrated hydrochloric acid) and the Wolff-Kishner reduction (heat with hydra zine and potassium hydroxide in a high boiling alcohol)... 

The most important manganese(V) compound is K MnO, a key intermediate in the manufacture of potassium permanganate. Potassium manganate(V) is an easily crystallized salt obtained by reduction of potassium permanganate using sodium sulfite in strong sodium hydroxide solution. This was the first compound to be recognized as exclusively pentavalent. 

The by-product of this process, pelargonic acid [112-05-0] is also an item of commerce. The usual source of sebacic acid [111-20-6] for nylon-6,10 [9008-66-6] is also from a natural product, ticinoleic acid [141-22-0] (12-hydroxyoleic acid), isolated from castor oil [8001-79-4]. The acid reacts with excess sodium or potassium hydroxide at high temperatures (250—275°C) to produce sebacic acid and 2-octanol [123-96-6] (166) by cleavage at the 9,10-unsaturated position. The manufacture of dodecanedioic acid [693-23-2] for nylon-6,12 begins with the catalytic trimerization of butadiene to make cyclododecatriene [4904-61-4] followed by reduction to cyclododecane [294-62-2] (see Butadiene). The cyclododecane is oxidatively cleaved to dodecanedioic acid in a process similar to that used in adipic acid production. 

The reduction does not proceed smoothly at room temperature with the palladium catalyst. Raney nickel may be used as a catalyst with ethanol containing potassium hydroxide at room temperature, but about 15 hours are required for reduction. 

Methylsuccinic acid has been prepared by the pyrolysis of tartaric acid from 1,2-dibromopropane or allyl halides by the action of potassium cyanide followed by hydrolysis by reduction of itaconic, citraconic, and mesaconic acids by hydrolysis of ketovalerolactonecarboxylic acid by decarboxylation of 1,1,2-propane tricarboxylic acid by oxidation of /3-methylcyclo-hexanone by fusion of gamboge with alkali by hydrog. nation and condensation of sodium lactate over nickel oxide from acetoacetic ester by successive alkylation with a methyl halide and a monohaloacetic ester by hydrolysis of oi-methyl-o -oxalosuccinic ester or a-methyl-a -acetosuccinic ester by action of hot, concentrated potassium hydroxide upon methyl-succinaldehyde dioxime from the ammonium salt of a-methyl-butyric acid by oxidation with. hydrogen peroxide from /9-methyllevulinic acid by oxidation with dilute nitric acid or hypobromite from /J-methyladipic acid and from the decomposition products of glyceric acid and pyruvic acid. The method described above is a modification of that of Higginbotham and Lapworth. ... 

---