Hydroxide definition

Hydroxide Fe(OH)3 (Fe + plus OH ) has definite existence and there are many ill-deiined hydrates used as pigments. FeOOH has two forms goethite and lepidocrocite. Colloidal Fe(OH)3 is easily obtained as a deep red sol. Many Fe(III) hydroxy complexes are known. Fe(OH)2 may be formed from Fe and OH" in the absence of O2 but it is very readily oxidized. 

Suspend the crude hydrochloride in some water in a separating-funnel and add 20% sodium hydroxide solution until the mixture is definitely alkaline and the crude phenylhydrazine base floats as a deep red oil on the surface. Now extract the phenylhydrazine twice with benzene (using about 30 ml. of benzene on each occasion) and dry the united benzene extracts with powdered... 

Toluene-p-sulphonamide can be similarly converted into the dimethyl-amide, but the methylation now occurs in two definite stages. First the sulphonamide dissolves in the sodium hydroxide to form the mono-sodium salt (see p. 252), which then reacts with the dimethyl sulphate to give the mono-... 

Glycine itself is almost neutral, and requires very little sodium hydroxide to give a pink colour with phenolphthalein some other amino-acids, e.g., glutamic acid, aspartic acid, etc., are definitely more acidic and consequently require more alkali for this purpose cf. footnote, p. 380). 

Primary aromatic amides are crystaUine sohds with definite melting points. Upon boiling with 10-20 per cent, sodium or potassium hydroxide solution, they are hydrolysed with the evolution of ammonia (vapour turns red htmus paper blue and mercurous nitrate paper black) and the formation of the alkah metal salt of the acid ... 

The iodoform test. Dissolve 0 -1 g. or 5 drops of the compound in 2 ml. of water if it is insoluble in water, add sufficient dioxan to produce a homogeneous solution. Add 2 ml. of 5 per cent, sodium hydroxide solution and then introduce a potassium iodide - iodine reagent dropwise with shaking until a definite dark colour of iodine persists. Allow to... 

The distillate may contain volatile neutral compounds as well as volatile acids and phenols. Add a slight excess of 10-20 per cent, sodium hydroxide solution to this distillate and distil until the liquid passes over clear or has the density of pure water. The presence of a volatile, water-soluble neutral compound is detected by a periodic determination of the density (see Section XI,2) if the density is definitely less than unity, the presence of a neutral compound may be assumed. Keep this solution Si) for Step 4. 

According to the Arrhenius definitions an acid ionizes m water to pro duce protons (H" ) and a base produces hydroxide ions (HO ) The strength of an acid is given by its equilibrium constant for ionization m aqueous solution... 

Base According to the Arrhenius definition (Section 1 12) a substance that ionizes in water to produce hydroxide ions According to the Brpnsted-Lowry definition (Section 1 13) a substance that accepts a proton from some suitable donor According to the Lewis definition (Section 1 17) an electron pair donor... 

The term lime also has a broad coimotation and frequently is used in referring to limestone. According to precise definition, lime can only be a burned form quicklime, hydrated lime, or hydraiflic lime. These products are oxides or hydroxides of calcium and magnesium, except hydraiflic types in which the CaO and MgO are chemically combined with impurities. The oxide is converted to a hydroxide by slaking, an exothermic reaction in which the water combines chemically with the lime. These reversible reactions for both high calcium and dolomitic types are Quicklime... 

Bismuth trioxide may be prepared by the following methods (/) the oxidation of bismuth metal by oxygen at temperatures between 750 and 800°C (2) the thermal decomposition of compounds such as the basic carbonate, the carbonate, or the nitrate (700—800°C) (J) precipitation of hydrated bismuth trioxide upon addition of an alkah metal hydroxide to a solution of a bismuth salt and removal of the water by ignition. The gelatinous precipitate initially formed becomes crystalline on standing it has been represented by the formula Bi(OH)2 and called bismuth hydroxide [10361 -43-0]. However, no definite compound has been isolated. 

The sodamide must be free from sodium hydroxide and may be conveniently weighed under the 250 cc. of purified mineral oil which is used to rinse out the mortar. Care must be exercised in the use of old sodamide as it sometimes contains an explosive compound that might cause trouble. The nature of this explosive compound is not definitely known however, it appears to be associated with the development of a lemon yellow color. Should any part of the sodamide develop this color it is recommended that the whole be destroyed at once. 

The first two are very soluble in water but the last is less so. Weaker bases inelude ammonium hydroxide where X is NH4. In faet every aeid ean generate a base by loss of a proton and the definition now ineludes any eompound eapable of donating eleetron pairs, e.g. amines. Bases turn litmus paper blue and show eharaeteristie effeets on other indieators. They are soluble in water, tarnish in air, and in eoneentrated form are eorrosive to the toueh. Common examples are given in Table 3.5. ... 

The compounds formed when a hydroxyl group (-OH) is substituted for a hydrogen are called alcohols. They have the general formula R-OH. The hydroxyl radical looks exactly like the hydroxide ion, but it is not an ion. Where the hydroxide ion fits the definition of a complex ion - a chemical combination of two or more atoms that have colleetively lost or (as in this case) gained one or more electrons - the... 

Kinetic evidence in the hydroxide-catalyzed halogenation of acetone provides definitive mechanistic information. The overall reaction is... 

There has been considerable discussion about the extent of hydration of the proton and the hydroxide ion in aqueous solution. There is little doubt that this is variable (as for many other ions) and the hydration number derived depends both on the precise definition adopted for this quantity and on the experimental method used to determine it. H30" has definitely been detected by vibration spectroscopy, and by O nmr spectroscopy on a solution of HF/SbFs/Ha O in SO2 a quartet was observed at —15° which collapsed to a singlet on proton decoupling, 7( 0- H) 106 Hz. In crystalline hydrates there are a growing number of well-characterized hydrates of the series H3O+, H5O2+, H7O3+, H9O4+ and H13O6+, i.e. [H(0H2) ]+ n = 1-4, Thus... 

The direct synthetic process is described in U.S. Patent 2,772,280. A solution of 73.3 g (0.332 mol) of (3-aminoxyalanine ethyl ester dihydrochloride in 100 ml of water was stirred in a 500 ml 3-necked round-bottomed flask cooled in an ice-bath. To the above solution was added over a 30-minute period 65.6 g (1.17 mols) of potassium hydroxide dissolved in 100 ml of water. While the pH of the reaction mixture was 7 to 10.5, a red color appeared which disappeared when the pH reached 11 to 11.5. The light yellow solution was allowed to stand at room temperature for 14 hour and then added to 1,800 ml of 1 1 ethanol-isopropanol. The reaction flask was washed twice with 10 ml portions of water and the washings added to the alcohol solution. The precipitated salts were filtered out of the alcohol solution and the filtrate cooled to 5°C in a 5 liter 3-necked round-bottomed flask. To the cold, well-stirred solution was added dropwise over a 35-minute period sufficient glacial acetic acid to bring the pH of the alcohol solution to 6.0. When the pH of the solution had reached 7 to 7.5, the solution was seeded and no further acetic acid added until Crystallization of the oil already precipitated had definitely begun. The crystalline precipitate was collected on a filter, washed twice with 1 1 ethanol-isopropanol and twice with ether. The yield of 4-amino-3-isoxazolidone was 22.7 g. 

Chromic hydroxide, Cr(OH)3, is a compound with low solubility in water. It is usually hydrated and does not have the definite composition represented by the formula. It is quite soluble either in strong acid or strong base. 

Discussion. The hydroxides of sodium, potassium, and barium are generally employed for the preparation of solutions of standard alkalis they are water-soluble strong bases. Solutions made from aqueous ammonia are undesirable, because they tend to lose ammonia, especially if the concentration exceeds 0.5M moreover, it is a weak base, and difficulties arise in titrations with weak acids (compare Section 10.15). Sodium hydroxide is most commonly used because of its cheapness. None of these solid hydroxides can be obtained pure, so that a standard solution cannot be prepared by dissolving a known weight in a definite volume of water. Both sodium hydroxide and potassium hydroxide are extremely hygroscopic a certain amount of alkali carbonate and water are always present. Exact results cannot be obtained in the presence of carbonate with some indicators, and it is therefore necessary to discuss methods for the preparation of carbonate-free alkali solutions. For many purposes sodium hydroxide (which contains 1-2 per cent of sodium carbonate) is sufficiently pure. 

Alternatively, add pure aqueous ammonia solution (1 1) by means of a dropper pipette until a definite precipitate of iron(III) hydroxide just begins to form. Now add concentrated hydrochloric acid dropwise, stirring and allowing to stand for a minute or two after each 2-3 drops, until a clear solution is obtained then add 1.5 mL of concentrated hydrochloric acid and mix well. 

The definitive structural determination of the P -hydroxide is the powder neutron diffraction work of Greaves and Thomas on / - Ni(OD)2 [22], They did neutron... 

Any reaction in which a proton is transferred from one substance to another is an acid-base reaction. More specifically, the proton-transfer view is known as the Bronsted-Lowiy definition of acids and bases. In an acid-base reaction, an acid donates a proton, and a base accepts that proton. Any species that can give up a proton to another substance is an acid, and any substance that can accept a proton from another substance is a base. The production of two water molecules from a hydroxide anion (a base) and a hydronium ion (an acid) is just one example of an acid-base reaction acids and bases are abundant in chemistry. 

A logarithmic scale is useful not only for expressing hydronium ion concentrations, but also for expressing hydroxide ion concentrations and equilibrium constants. That is, the pH definition can be generalized to other quantities pOH = - log [OH ] p Tg = - log Tg p log... 

---