Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydroformylation homogeneous catalysis

Keywords Carbonylation Homogeneous catalysis Hydroformylation Immobilisation Ionic liquids Supported catalysts... [Pg.149]

Sellin MF, Webb PB, Cole-Hamilton DJ (2001) Continuous flow homogeneous catalysis hydroformylation of alkenes in supercritical fluid-ionic liquid biphasic mixtures. Chem Commun 8 781-782... [Pg.36]

Much of the recent interest in insertion reactions undeniably stems from the emphasis placed on development of homogeneous catalysis as a rational discipline. One or more insertion is involved in such catalytic processes as the hydroformylation (31) or the polymerization of olefins 26, 75) and isocyanides 244). In addition, many insertion reactions have been successfully employed in organic and organometallic synthesis. The research in this general area has helped systematize a large body of previously unrelated facts and opened new areas of chemistry for investigation. Heck 114) and Lappert and Prokai 161) provide a comprehensive compilation and a systematic discussion of a wide variety of insertion reactions in two relatively recent (1965 and 1967) reviews. [Pg.90]

Regioselective reactions belong to the most important applications of homogeneous catalysis. An example is the hydroformylation of alkenes, which is a very important industrial reaction ... [Pg.112]

The use of thermomorphic systems has recently been studied as a way of achieving catalyst separation in homogeneous catalysis. For example, a biphasic hydroformylation catalyst system was developed to take advantage of the unusual solvent characteristics of perfluorocarbons combined with typical organic solvents (4). Fluorous/organic mixtures such as perfiuoromethylcyclohexane... [Pg.244]

The hydroformylation of alkenes, which was originally discovered by Otto Roelen in 1938 [1], has developed into one of the most important applications of homogeneous catalysis in industry (Scheme 1) [2,3]. Today, more than 9 million tons of so-called oxo-products are produced per year, a number which is still rising continuously. The majority of these oxo-products stem... [Pg.147]

Biphasic techniques for recovery and recycle are among the recent improvements of homogeneous catalysis - and they are the only developments which have been recently and successfully applied in the chemical industry. They are specially introduced into the hydroformylation (or "oxo") reaction, where they form a fourth generation of oxo processes (Figure 5.1 [1]). They are established as the "Ruhrchemie/Rhone-Poulenc process" (RCH/RP) [2] cf. also Section 5.2.4.1), with annual production rates of approximately 800,000 tonnes y"1 (tpy). [Pg.105]

A wide variety of new approaches to the problem of product separation in homogeneous catalysis has been discussed in the preceding chapters. Few of the new approaches has so far been commercialised, with the exceptions of a the use of aqueous biphasic systems for propene hydroformylation (Chapter 5) and the use of a phosphonium based ionic liquid for the Lewis acid catalysed isomerisation of butadiene monoxide to dihydrofuran (see Equation 9.1). This process has been operated by Eastman for the last 8 years without any loss or replenishment of ionic liquid [1], It has the advantage that the product is sufficiently volatile to be distilled from the reactor at the reaction temperature so the process can be run continuously with built in product catalyst separation. Production of lower volatility products by such a process would be more problematic. A side reaction leads to the conversion of butadiene oxide to high molecular weight oligomers. The ionic liquid has been designed to facilitate their separation from the catalyst (see Section 9.7)... [Pg.237]

Today, iridium compounds find so many varied applications in contemporary homogeneous catalysis it is difficult to recall that, until the late 1970s, rhodium was one of only two metals considered likely to serve as useful catalysts, at that time typically for hydrogenation or hydroformylation. Indeed, catalyst/solvent combinations such as [IrCl(PPh3)3]/MeOH, which were modeled directly on what was previously successful for rhodium, failed for iridium. Although iridium was still considered potentially to be useful, this was only for the demonstration of stoichiometric reactions related to proposed catalytic cycles. Iridium tends to form stronger metal-ligand bonds (e.g., Cp(CO)Rh-CO, 46 kcal mol-1 Cp(CO)Ir-CO, 57 kcal mol ), and consequently compounds which act as reactive intermediates for rhodium can sometimes be isolated in the case of iridium. [Pg.35]

Optically active aldehydes are important precursors for biologically active compounds, and much effort has been applied to their asymmetric synthesis. Asymmetric hydroformylation has attracted much attention as a potential route to enantiomerically pure aldehyde because this method starts from inexpensive olefins and synthesis gas (CO/H2). Although rhodium-catalyzed hydrogenation has been one of the most important applications of homogeneous catalysis in industry, rhodium-mediated hydroformylation has also been extensively studied as a route to aldehydes. [Pg.384]

Sequential hydroformylation/reductive amination of dendritic perallylated polyglycerols with various amines in a one-pot procedure to give dendritic polyamines in high yields (73-99%). Furthermore, the use of protected amines provides reactive core-shell-type architectures after deprotection. These soluble but membrane filterable multifunctional dendritic polyamines are of high interest as reagents in synthesis or as supports in homogeneous catalysis as well as nonviral vectors for DNA-transfection (Scheme 18) [65]. [Pg.86]

Multiphase homogeneous catalysis (continued) hydroformylation, 42 483-487, 498 hydrogenations, 42 488-491 metal salts as catalysis, 42 482-487 neutral ligands, 42 481 82 organic reactions, 42 495 0X0 synthesis, 42 483-487 ring-opening metathesis polymerization and isomerization, 42 492-494 telomerizations, 42 491-492 diols as catalyst phase, 42 496 fluorinated compounds as catalyst phase, 42 497... [Pg.151]

Keywords Supercritical carbon dioxide Solubility measurement Homogeneous catalysis Multi-phase catalysis Hydroformylation... [Pg.110]

For instance, catalysis in liquid/liquid two phases is generally referred to as biphasic catalysis and has widened the practical scope of homogeneous catalysis the catalyst is present in one liquid phase, while reactants and products are present in the other liquid phase. Thus, the catalyst can be separated by simple phase separation. Celanese is operating a 300 000 t/a plant for propylene hydroformylation using a water-soluble rhodium phosphine complex in a biphasic mode of operation at the Ruhrchemie site in Oberhausen [142],... [Pg.128]

Frohning CD, Kohlpaintner CW, Bohnen H-W (2002) Hydroformylation (Oxo Synthesis, Roelen Reaction) In Cornils B, Herrmann WA (eds) Applied homogeneous catalysis with organometallic compounds, vol 1. Wiley, Weinheim, p 31 Htocu D, Beckman E (2001) Green Chem 3 80... [Pg.145]

There are an increasing number of applications of high pressure NMR in supercritical fluids to homogeneous catalysis [266]. Using their toroidal pressure probe, Rathke and coworkers [249, 267-269] have extensively studied the Co2(CO)g-cata-lyzed hydroformylation of olefins in scCOj (Eq. (14)). The hydrogenation of Co2(CO)g (Eq. (15)) is a key step in this reaction. [Pg.61]

It must be emphasized that the above considerations were made in the absence of reaction. Interfacial mass transfer followed by reaction requires further consideration. The Hatta regimes classify transfer-reaction situations into infinitely slow transport compared to reaction (Hatta category A) to infinitely fast transport compared to reaction (Hatta category H) [42]. In the first case all reaction occurs at the interface and in the second all reaction occurs in the bulk fluid. Homogenous catalytic hydrogenations, carbonylations etc. require consideration of this issue. An extreme example of the severity of mass transport effects on reactivity and selectivity in hydroformylation has been provided by Chaudari [43]. Further general discussions for homogeneous catalysis can be found elsewhere [39[. [Pg.160]

In the following we consider the use of ILs as solvents for homogeneous catalysis as well as their use as catalysts. The information will be organized according to the general category of the reaction, e.g., oxidation, hydroformylation, or by a named reaction such as Diels-Alder, Friedel-Crafts, etc. [Pg.158]


See other pages where Hydroformylation homogeneous catalysis is mentioned: [Pg.1480]    [Pg.127]    [Pg.3]    [Pg.230]    [Pg.1480]    [Pg.127]    [Pg.3]    [Pg.230]    [Pg.258]    [Pg.293]    [Pg.174]    [Pg.556]    [Pg.162]    [Pg.169]    [Pg.176]    [Pg.484]    [Pg.205]    [Pg.245]    [Pg.47]    [Pg.281]    [Pg.7]    [Pg.9]    [Pg.15]    [Pg.163]    [Pg.70]    [Pg.165]    [Pg.103]    [Pg.111]    [Pg.48]    [Pg.232]    [Pg.92]   
See also in sourсe #XX -- [ Pg.798 , Pg.799 ]

See also in sourсe #XX -- [ Pg.722 , Pg.797 ]




SEARCH



Alkenes hydroformylation, homogeneous catalysis

Homogeneous catalysis

Homogeneous catalysis hydroformylation process

Homogenous catalysis

Hydroformylation catalysis

Multiphase homogeneous catalysis hydroformylation

© 2024 chempedia.info