Home networking

Figure 1. A typical network scenario representing the call set-up between two roaming user equipments, users are subscribed to different telecom operators (home networks).

For Validation the results of simulations based on the proposed model are compared with measurements. This was done on the one hand with a sample network with well known topology and geometric dimensions and on the other hand with a real in-home network. 

In order to probe the throughput variations caused by noisy channels in electrical Latin-American environments, five scenarios were created with a PLC network, in a common electrical distribution home network, with 120 AC volts and 60Hz. Figure 3 shows the basic implementation. The electric noise source is connected in the outlet over the same electrical circuit using common wall sockets depending upon the scenario. In a first stage, the noise source is connected at the Tx host side, the measurements are taken and the noise source is connected at the receptor side for finally measurements. 

The effects of the proved noise sources over the low voltage home network and the scenarios results comparison are shown in part A. In the second results part, the noises that affected the probed channel are analyzed with the statistical resources. 

In-home network model controls the noises on electrical channels within a local area network, -LAN-, by implementing band-p>ass and band-stop filters as given in Figure 16. The communication signals within the powerline infrastructme is bandpass filtered at each PLC client connection point by instaUtng PLC splitters. The noise control requirement isolates the noisy signals on communication channels. 

The application in-home network requires bandwidth control affected by the analyzed noises. The scenarios showed enough control with filters applied not at the noise source but at the electric connection in the data equipment. The neighbors electric networks are not expected to be affected by the noises in the PLC LAN but they could be affected by external noises even though their implications are filtered by the suggested appliances and it is not necessary to install special filters at the main electrical p>aneL... 

Ecological design of smart home networks Technologies, social impact and... 

Marconi had a dream of a world connected by wireless devices, and as of 2011 that dream is coming true. The IEEE 802 wireless connectivity standards as of 2009 include a personal area network (Bluetooth) that will connect all the devices in a house, car, or office. It has an expanded wireless LAN standard that will support high-speed wireless access of home and office computers into an access point. Both the wireless home network and the wireless LAN can be tied into a high-speed wireless regional network, replacing the current fiber-optic networks. There will be several high-speed cell phone networks that can also tie into the regional wireless system, and when this is added to the current satellite-based wide area networks, the result could be the fully connected wireless world Marconi envisioned. 

This consortium envisions toys of the future that carry new forms of networking into the home. They report that toys will lead the way to bring a home networking technology infrastructure fester than other means. This action will be different than what the consumers have become accustomed to tolerating home computers that have their share of problems. 

This model has had a useful implication for security. Hosts on the home network cannot be easily scanned and exploited from the outside. Indeed, it takes some work to detect NAT at all (Bellovin, 2002). Internal hosts enjoy considerable protection in this arrangement, and it is likely that some form of NAT will be used often, even when (if ) IP version 6 (a new protocol description with support for a much larger address space) is deployed. A special configura-... 

Asai, M., Inuzuka, Y, Koike, K., Takahashi, S., and Koike, Y. (2011) High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stability for home-networks. /. Lightwave Technol, 29 (11), 1620-1626. 

We believe that the next big step in optical fiber technology will be plastic optical fibers (POFs). In advanced countries, fiber-to-the-home (FTTH) services that interconnect homes with a GOF backbone are well established. However, intrabuilding networks such as home networks have yet to be adequately developed. With the increase in the number and use of home PCs, high-definition (3D) TVs, blu-ray devices, digital cameras, storage devices, and intelligent home appliances, the demand has increased for optical data-link connections not only up to the... 

In fact, the excellent low-loss characteristic of CYTOP-based GI POF (e.g., 10 dB/km) is far beyond the requirement of home networking. However, its real uniqueness is the low material dispersion derived from the low refractive index. In the past, there have been several reports on perdeuterated PMMA (PMMA-dg)... 

Keywords Home networking, usability, user interface, and ICEbox. 

---