Camera digital

Digestalin Digesto2yme Digisidin Digital cameras Digitalis... 

The flow regimes in the test sections were identified visually with the aid of a strobe and a digital camera. The camera was always targeted at the test section center. No systematic attempt was made to assess and eliminate the test section entrance effects on the flow regimes. However, the distance between the point pictured by the camera and the test section inlet was well over 100 channel diameters everywhere. Thus, although the possibility exists that the reported flow regimes are influenced by the test section entrance conditions, this influence may not be significant. 

Crystals of inorganic materials as seen through digital camera... 

Computers are well suited to the manipulation of numbers, but the ES relies on symbolic computation, in which symbols stand for properties, concepts, and relationships. The degree to which an ES can manage a task may depend on the complexity of the problem. For example, computer vision is an area of great interest within AI and many programs exist that can, without human assistance, use the output from a digital camera to extract information, such as the characters on a car number plate. However, automatic analysis of more complex images, such as a sample of soil viewed through a microscope, is far... 

To diagnose the surface blemish problem several analytical techniques were employed. First, the samples were photo-documented. Since an aesthetic problem is by definition a problem with the visual appearance of an item, it is important to ascertain if all the defects are different or of the same nature. With close inspection, the sun visor arms were found to contain two distinct types of defects. Figure 1(a) shows what was called the Type A defect and Figure 1(b) shows the so-called Type B defect. These images were acquired using a stereomicroscope coupled with a digital camera. 

Several injection-molded polycarbonate (PC) disks used in a consumer product (i.e., a clock face) were analyzed, because the disks contained defects. The defects were analyzed initially and imaged using a stereoscopic microscope fitted with a digital camera. The defects present on the samples were easily identified. It was noticed that the defects were located on different regions of the molded part. This important observation eliminated a systematic problem or an imperfection at a specific site on the mold surface as the cause of the defect. 

Such detectors are frequently charge-coupled devices (CCD) known from digital cameras... 

The fluorescent components are denoted by / (intensity) followed by a capitalized subscript (D A or s, for respectively Donors, Acceptors, or s.e.) to indicate the particular population of molecules responsible for emission and a lower-case superscript ( " or ) that indicates the detection channel (or filter cube). For example, I denotes the intensity of the donors as detected in the donor channel and reads as Intensity of donors in the donor channel, etc. Notes (1) The excitation in the s.e. channel is generally set up to be equal to that in the donor channel. In case a separate filter cube is used, slight differences may occur, which is denoted by Don(S). See the text and appendix for further details. (2) The s.e. emission filter is usually the same as the acceptor emission filter in confocal determinations. We here designate a different filter to accommodate those wide-field/digital camera experiments that employ different filters for A and S. (3) Here the notation D-S indicates the residual (quenched) donor fluorescence in the presence of the acceptor. In the other chapters this is indicated as DA. Hence ... 

Fig. 3 Prepared ZnO QDs embedded in Si02 matrix under (a) ordinary and (b) UV (365 nm excitation) lamps. (A) Solid samples, (B) samples dissolved in ethanol, and (C) samples dissolved in water. Photographs were taken with a digital camera just after completion of synthesis, (c) TEM Image of symmetrically dispersed ZnO QDs embedded in Si02 matrix. (Figure adapted from [40])...

As the battery produces electricity, lithium chloride is formed on the cathode, and eventually the battery is no longer effective. Lithium batteries have long life and give high current-to-weight ratio, so they are widely used in digital cameras, watches, pacemakers, and so forth. 

All these features above make AMOLED especially suitable for portable DVD players, digital cameras, portable TVs, and game players. The discussion in this section also suggests that the performance of a given OLED display can be maximized by proper design of display contents. 

One of the most obvious markets for thin-film vapor-deposited organic materials is in flat panel displays [123], a market currently dominated by LCDs. Over the last two decades, a great improvement in the lifetime and efficiency of OLEDs have been achieved. OLED displays can already be found in simple applications such as automobile stereos, mobile phones, and digital cameras. However, to exploit the advantages of the technology fully, it is necessary to pattern the OLEDs to form monochrome, or more preferentially, full-color displays. This section will consider the difficulties involved in addressing such displays (either passively or actively) and the variety of patterning methods that can be used to produce full-color displays. 

FIGURE 7.16 A commercially available digital camera containing a full-color AMOLED display from Sanyo-Eastman Kodak. 

Human vision is insensitive to light beyond 650 rnn, and therefore it is not possible to view the far red fluorescent dyes by looking through the eyepiece of a conventional fluorescence micro scope. However, the fluorescence in this spectrum region is efficiently registered by sensitive digital cameras... 

Connectors for electronic and electrical devices such as personal computers, digital cameras and mobile telephones safety switches, telecommunication parts. .. 

Optical applications storage media, CD, CD-ROM, DVD, SACD (super audio compact disc) lenses for cameras on mobile phones, digital cameras, compact cameras, CD-players, video recorders... 

Camera It is important to have the pictures of crystals. Aside from the obvious reason of publication and grant writing, pictures give an on-going record of crystallization conditions and make it easy to see improvements in crystals over time. Cameras can be either film or digital and are usually easily mounted onto most microscopes. Olympus and Nikon offer very good digital camera systems. 

To avoid condensation on the smface of the windows, the overall temperature is controlled with the use of heaters located in different places within the cell. A digital camera is then placed on top of the transparent end plate and is connected to a computer that gathers and analyzes the images. The performance of these cells compared to that of typical fuel cells is usually lower due to increased ohmic resistance caused by the use of FF plates with machined-through channels. 

---