Detector, high-performance liquid

The second set of experiments describes the application of high-performance liquid chromatography. These experiments encompass a variety of different types of samples and a variety of common detectors. 

For selective estimation of phenols pollution of environment such chromatographic methods as gas chromatography with flame-ionization detector (ISO method 8165) and high performance liquid chromatography with UV-detector (EPA method 625) is recommended. For determination of phenol, cresols, chlorophenols in environmental samples application of HPLC with amperometric detector is perspective. Phenols and chlorophenols can be easy oxidized and determined with high sensitivity on carbon-glass electrode. 

Coupling of analytical techniques (detectors) to high-performance liquid chromatographic (HPLC) systems has increased in the last tree decades. Initially, gas chromatography was coupled to mass spectrometry (MS), then to infrai ed (IR) spectroscopy. Following the main interest was to hyphenate analytical techniques to HPLC. 

P. R. Boshoff, B. J. Hopkins and V. Pretorius, Tliin-layer chromatograpliic ti anspoit detector for high-performance liquid cliromatography , ]. Chromatogr. 126 35-41 (1976). 

EC = electrical conductivity detector ECD = electron capture detector FPD = flame photometric detector GC = gas chromatography HPLC = high performance liquid chromatography NPD = nitrogen phosphorus detector TID = thermionic detector UV = ultraviolet spectroscopy... 

GC = gas chromatography ECD = electron capture detector EIA = enzyme-immunoassay GPC = gel permeation chromatography HPLC = high-performance liquid chromatography ITMS = ion trap mass spectrometer LSE = liquid solid extraction MS = mass spectrometry RSD = relative standard deviation SPE = solid phase extraction... 

D2O = deutered water. HPLC = high performance liquid chromatography. IS = internal standard. MeOH = methanol. MS = mass spectrometry. NMR = nuclear magnetic resonance. PDA = photodiode array detector. TEA = triethylamine. MTBE = methyl tert-butyl ether. 

High Performance Liquid Chromatography. All separations were performed using an Altex Scientific (1780 Fourth Street, Berkeley, CA 94710) Model 320 Advance Research Chromatograph, consisting of a model lOOA dual piston analytical pump, a Model 153 UV detector, a Model 210 injection valve, and a Model 155 recorder. The columns (600 x7.5mm) evaluated were the Spherogel TSK-SW-2000 and SW-3000 (Altex). Unless otherwise stated, all separations were carried out at 23 - 25 . 

The most common approaches to sulfonylurea determinations involve high-performance liquid chromatography (HPLC). The earliest reported methods utilized normal-phase liquid chromatography (LC) with photoconductivity detection this type of detector demonstrated undesirably long equilibration times and is no longer... 

Bispyribac in water samples can be directly quantifled by high-performance liquid chromatography (HPLC) using an ultravilot (UV) detector without methylation. 

High-performance liquid chromatograph equipped with a UV detector Microsyringe, 25- iL... 

High-performance liquid chromatography (HPLC) with a micellar mobile phase or with a selective pre-column or reaction detection system has also been used to determine alkylenebis(dithiocarbamaes). ° Zineb and mancozeb residues in feed were determined by ion-pair HPLC with ultraviolet (UV) detection at 272 nm. These compounds were converted to water-soluble sodium salts with ethylenediaminetetra-acetic acid (EDTA) and sodium hydroxide. The extracts were ion-pair methylated with tetrabuthylammonium hydrogensulfate (ion-pair reagent) in a chloroform-hexane solvent mixture at pH 6.5-8.S. The use of an electrochemical detector has also been reported. ... 

Gas chromatograph equipped with an electron capture detector High-performance liquid chromatograph... 

Milbemectin consists of two active ingredients, M.A3 and M.A4. Milbemectin is extracted from plant materials and soils with methanol-water (7 3, v/v). After centrifugation, the extracts obtained are diluted to volume with the extraction solvent in a volumetric flask. Aliquots of the extracts are transferred on to a previously conditioned Cl8 solid-phase extraction (SPE) column. Milbemectin is eluted with methanol after washing the column with aqueous methanol. The eluate is evaporated to dryness and the residual milbemectin is converted to fluorescent anhydride derivatives after treatment with trifluoroacetic anhydride in 0.5 M triethylamine in benzene solution. The anhydride derivatives of M.A3 and M.A4 possess fluorescent sensitivity. The derivatized samples are dissolved in methanol and injected into a high-performance liquid chromatography (HPLC) system equipped with a fluorescence detector for quantitative determination. 

High-performance liquid chromatograph Model LC-6A equipped with RF-535 fluorescence detector (Shimadzu Co., Japan)... 

Torsi, G., Chiavari, G., Laghi, C., and Asmudsdottir, A., Responses of different UV-visible detectors in high-performance liquid chromatographic measurements when the absolute number of moles of an analyte is measured, /. Chromatogr., 518, 135, 1990. 

Shelly, D. C. and Warner, I. M., Fluorescence detectors in high-performance liquid chromatography, in Liquid Chromatography Detectors, Vol. 23, Vickrey, T. M., ed., Marcel Dekker, New York, 1983, chap. 3. 

Brunt, K., Electrochemical detectors for high-performance liquid chromatography and flow analysis systems, Trace Analysis, Vol. 1, Lawrence, J. F., Ed., Academic Press, New York, 1981, 47-120. 

Bollet, C., Oliva, P., and Caude, M., Partial electrolysis electrochemical detector in high-performance liquid chromatography, /. Chromatogr., 149,625,1977. 

High Performance Liquid Chromatographic (HPLC) Analysis. A Waters HPLC system (two Waters 501 pumps, automated gradient controller, 712 WISP, and 745 Data module) with a Shimadzu RF-535 fluorescence detector or a Waters 484 UV detector, and a 0.5 pm filter and a Rainin 30 x 4.6 mm Spheri-5 RP-18 guard column followed by a Waters 30 x 3.9 cm (10 pm particle size) p-Bondapak C18 column was used. The mobile phase consisted of a 45% aqueous solution (composed of 0.25% triethylamine, 0.9% phosphoric acid, and 0.01% sodium octyl sulfate) and 55% methanol for prazosin analysis or 40% aqueous solution and 60% methanol for naltrexone. The flow rate was 1.0 mL/min. Prazosin was measured by a fluorescence detector at 384 nm after excitation at 340 nm (8) and in vitro release samples of naltrexone were analyzed by UV detection at 254 nm. 

---