HC1 catalyst

The following data were obtained for the decomposition of 0.056 mol/liter glucose at 140 C at various concentrations of HC1 catalyst ... 

Because alkoxy substituted alcohols are acid sensitive the support must be either neutral or even basic. That the presence of a basic promoter is needed can be seen by a strongly decreased activity when the Ca and Mg, which are present originally in the carrier, are removed by washing with 2N HC1. Catalysts prepared with additional basic metals as chlorides (1% metal on catalyst) were tested at 200°C. At these temperatures there are only very small differences between the metals. Figure 2 shows a plot of ionic radius versus conversion of MEA. The best promotors are potassium and calcium. 

Reillex 425 HC1, dihydropyran, 86°, 1.5 h, 84-98% yield. The Reillex resin is a macroreticular polyvinylpyridine resin and is thus an insoluble form of the PPTS catalyst. 

The chemistry of alkynes is dominated by electrophilic addition reactions, similar to those of alkenes. Alkynes react with HBr and HC1 to yield vinylic halides and with Br2 and Cl2 to yield 1,2-dihalides (vicinal dihalides). Alkynes can be hydrated by reaction with aqueous sulfuric acid in the presence of mercury(ll) catalyst. The reaction leads to an intermediate enol that immediately isomerizes to yield a ketone tautomer. Since the addition reaction occurs with Markovnikov regiochemistry, a methyl ketone is produced from a terminal alkyne. Alternatively, hydroboration/oxidation of a terminal alkyne yields an aldehyde. 

In an addition reaction, a small molecule (e.g., H2, Cl2, HC1, H20) adds across a double or triple bond. A simple example is the addition of hydrogen gas to ethene in the presense of a nickel catalyst. 

To a solution of l. 47 g (0.03 mol) of sodium cyanide and 4.73 g (0.03 mol) of (-)-(.S)-x-methylbenzylamine hydrochloride in 5 mL of cold water is added 1 g (8.3 mmol) of free ( - )-(.S )-a-mcthylbcnzylaininc in 200 mL of CHjOH. 1.32 g (0.03 mol) of acetaldehyde is added at 0°C and the clear solution is kept at r.t. for five days. After evaporation of the solvent in vacuo, the residue is dissolved in 50 mL of 1 N HC1 and the solution is extracted twice with diethyl ether. After addition of 12 N HCl to adjust the acid concentration to approximately 5 N, the solution is retluxed for 6 h. The HCl is evaporated in vacuo and the residue is dried over sodium hydroxide. The crude. V-x-methylbenzylalaninc hydrochloride is dissolved in 200 mL of 50% ethanol and the pH is adjusted to 6.0 with NaHCOj. To this solution, 3.5 g of palladium hydroxide is added. After hydrogenolysis for 10 h, the catalyst is filtered off and washed with hot water. The filtrate is concentrated to 30%, and the pH is adjusted to 1 with dilute IIC1. The solution is evaporated to dryness and the alanine hydrochloride is extracted with three 20-inL portions of absolute ethanol. After cooling overnight at — 50°C, the precipitated salt is filtered. Pyridine is added to the alcoholic solution to precipitate crude alanine, which is dissolved in 2.5 mL of water. The pH is adjusted with pyridine to 5.5-6.0, and 10 mL of absolute ethanol arc added yield 0.45 g (17% over four steps) mp 290 C [a] 7 + 13.13 (0 = 2.32. 6 N IICi). 

N02 at concentrations up to 8 ppm(v) in the inlet gas did not poison the C150-1-03 catalyst. The location of the hot spot fluctuated between the 31 and 44% levels. The hot spot did not drop sharply down into the catalyst bed as it had during the poisoning studies with H2S and HC1. 

Although benzene is not a poison such as H2S and HC1, it does depress activity by reforming and adsorption onto the catalyst. At high levels it can produce carbon. 

The catalytic efficiency increases, under comparable conditions (pH, concentration of catalyst, etc.) in the sequence Cl < Br - S(CH3)2 < SCN < SC(NH2)2 < I . Titration with a calibrated solution of NaN02 (usually 0.05 to 0.10 m) is used for the analytical determination of aromatic amines, dissolved in aqueous H2S04 or HC1. Here nucleophilic catalysis is achieved by adding KBr. This allows a titration to be completed much faster than without that addition. 

To a mixture of vinyl bromide (40 mmol) and the catalyst dichloro-[(R)-Af,N-dimethyl-l-[(.S)-2-(diphenylphosphino)ferrocenyl]ethylamine]-palladium(n) (0.2 mmol) was added an ethereal solution of [a-(trimethyl-silyl)benzyl]magnesium bromide (0.6-1 m, 80 mmol) at —78 °C. The mixture was stirred at 30 °C for 4 days, and then cooled to 0 °C and hydrolysed with dilute aqueous HC1 (3 m). The organic layer was separated, and the aqueous layer was re-extracted with ether. The combined organic extracts were washed with saturated sodium hydrogen carbonate solution and water, and dried. Concentration and distillation gave the chiral allylsilane (79%, 66% ee), b.p. 55°C/0.4mmHg. 

Solution reactions between diacid chlorides and diols or diphenols are carried out in THF or CH2C12 at —10 to 30°C in die presence of tertiary amines such as triethylamine or pyridine, which play a role of both reaction catalyst and HC1 acceptor (Scheme 2.26). This synthetic mediod is also termed acceptor-catalytic polyesterification.295-297 High-temperature solution reactions have also been reported for a number of less soluble, generally semicrystalline, aromatic polyesters.6 They yield high-molar-mass polyesters exhibiting good mechanical properties and thermal stability. 

Another class of silicon-containing polymers that have great potential to be extremely useful precursor materials are poly(chlorocarbosilanes).14f 46 Poly (chlorocarbosilanes) are not useful without modification because of the rapid hydrolysis of Si—Cl bonds, forming HC1 and an insoluble crosslinked polymer network. However, nucleophilic substitution of these Si—Cl bonds with various reagents produces materials widi a broad range of properties that are determined by the nature of the nucleophile used.47 Poly(chlorocarbosilanes) can be easily synthesized by ADMET (Fig. 8.18) without any detrimental side reactions, since the Si—Cl bond is inert to both catalysts 12 and 14. Early studies produced a polymer with Mn = 3000.14f... 

In the second process the /z-paraffins are partially chlorinated with chlorine gas in a multistage reactor. The resulting product, a mixture of /z-paraffins and chloroparaffins, is fed, together with excess benzene, into a reactor where AlCl3-catalyzed alkylation is performed. The catalyst suspended or dissolved in the crude alkylate is then separated, while the benzene and unconverted ti-paraffins are recovered by distillation and recycled to the previous reaction stages. In the last step of the process, the LAB is separated from the heavy alkylates. This second process needs to be integrated with a chlorine production unit and with an additional industrial transformation plant which makes use of the corrosive HC1 byproduct. 

Many enantioselective catalysts have been developed for reduction of functional groups, particularly ketones. BINAP complexes of Ru(II)C12 or Ru(II)Br2 give good enantioselectivity in reduction of (3-ketoesters.49 This catalyst system has been shown to be subject to acid catalysis.50 Thus in the presence of 0.1 mol % HC1, reduction proceeds smoothly at 40 psi of H2 at 40° C. 

Treatment of a mixture of alcohol 10 and chiral imidate 67 with catalytic TfOH only afforded a 1.2 to 1.3 1 mixture of 18 19 in a combined HPLC assay yield of 91%. Clearly, under these conditions, the reaction was proceeding under an SN1 reaction pathway. The use of other acid catalysts (TMSOTf, HC1, H2S04, TFA, MsOH) in a variety of solvent systems and under a number of reaction conditions did not improve the diastereomeric ratio of 18 19 (typically 1.2 1), or simply resulted in no reaction. 

Based on these preliminary findings, related couplings to pyruvates and iminoacetates were explored as a means of accessing a-hydroxy acids and a-amino acids, respectively. It was found that hydrogenation of 1,3-enynes in the presence of pyruvates using chirally modified cationic rhodium catalysts delivers optically enriched a-hydroxy esters [102]. However, chemical yields were found to improve upon aging of the solvent 1,2-dichloroethane (DCE), which led to the hypothesis that adventitious HC1 may promote re-... 

---