Halides mercaptans

Common types of radicals that add to n bonds are those that can be generated from alkyl halides, mercaptans, thiophenols, thioacids, aldehydes, and ketones. Like the corresponding electrophilic additions to double bonds, many radical additions are either regiospecific or highly regioselective. 

Acetylene and Substituted Acetylenes in Presence of Carboxylic Acids, Hydrogen Halides, Mercaptans or Amines... 

Uses Intermediate for mfg. of alkyl sulfates and ethoxylates, alkyl halides, esters, alkyl amines, aluminum rolling lubricants, tertiary amines, cosmetics, ethoxylates, halides/mercaptans, polymerization stabilizers, sulfation Regulatory Not regulated for transport Canada DSL Australia Philippines China Korea Japan ENCS... 

Mercaptans (or thio-alcohols or thiols), the sulphur analogues of the alcohols, were formerly prepared by the interaction of an alkyl halide and sodium hydrosulphide in alcoholic solution ... 

The catalytic effect of protons has been noted on many occasions (cf. Section II,D,2,c) and autocatalysis frequently occurs when the nucleophile is not a strong base. Acid catalysis of reactions with water, alcohols, mercaptans, amines, or halide ions has been observed for halogeno derivatives of pyridine, pyrimidine (92), s-triazine (93), quinoline, and phthalazine as well as for many other ring systems and leaving groups. An interesting displacement is that of a 4-oxo group in the reaction of quinolines with thiophenols, which is made possible by the acid catalysis. 

As esters the alkyl halides are hydrolysed by alkalis to alcohols and salts of halogen acids. They are converted by nascent hydrogen into hydrocarbons, by ammonia into amines, by alkoxides into ethers, by alkali hydrogen sulphides into mercaptans, by potassium cyanide into nitriles, and by sodium acetate into acetic esters. (Formulate these reactions.) The alkyl halides are practically insoluble in water but are, on the other hand, miscible with organic solvents. As a consequence of the great affinity of iodine for silver, the alkyl iodides are almost instantaneously decomposed by aqueous-alcoholic silver nitrate solution, and so yield silver iodide and alcohol. The important method of Ziesel for the quantitative determination of alkyl groups combined in the form of ethers, depends on this property (cf. p. 80). 

The interaction of alkyl halides with mercaptans or alkaline mercaptides prodnces thioalkyl derivatives. This is a typical nncleophilic substitution reaction, and one cannot tell by the nature of products whether or not it proceeds through the ion-radical stage. However, the version of the reaction between 5-bromo-5-nitro-l,3-dioxan and sodium ethylmercaptide can be explained only by the intermediate stage involving electron transfer. As found (Zorin et al. 1983), this reaction in DMSO leads to diethyldisulfide (yield 95%), sodium bromide (quantitative yield), and 5,5 -bis(5-nitro-l,3-dioxanyl) (yield 90%). UV irradiation markedly accelerates this reaction, whereas benzene nitro derivatives decelerate it. The result obtained shows that the process begins with the formation of ethylthiyl radicals and anion-radical of the substrate. Ethylthiyl radicals dimerize (diethyldisulfide is obtained), and anion-radicals of the substrate decompose monomolecularly to give 5-nitro-l,3-dioxa-5-cyclohexyl radicals. The latter radicals recombine and form the final dioxanyl (Scheme 4.4). 

Hydrogen sulfide, mercaptans, and hydrogen halides are also poisons for the reaction. This effect of the hydrogen halides probably results from the formation of di- and triisobutylene by a mechanism similar to that which occurs at ordinary temperatures. 

Aromatic Compounds with Sulfides and Mercaptans. Alkyl sulfides and mercaptans function very similarly to ethers and alcohols. Hydrogen sulfide is produced and it escapes as a gas not being significantly soluble in liquid hydrogen fluoride. In this respect the technique of procedure is similar to that used for alkyl halides. 

Just as in the case of aromatic compounds isoparaffins can be alkylated with sources of alkyl groups other than olefins. Alkyl halides, alcohols, ethers, mercaptans, sulfides, etc., can be used. When olefins are used some alkyl fluorides from a combination of olefin and hydrogen fluoride are always formed. The quantity of this in the product can be greatly reduced by providing conditions under which the alkyl fluoride is used in alkylation. The apparent paradox is provided, in that the fluoride content of the product is lessened by further treatment with hydrogen fluoride. A more thorough treatment of the details of the alkylation of isoparaffins with olefins is found elsewhere in this volume. 

Other examples are acetoacetates alkylamines and alkylhalides/acid halides ethers esters chloroformates ketones lactames lactones malonates mercaptanes and orthoesters in aliphatics catechol/hydroquinone/resorcinol, cresidines haloaromatics in aromatics and coumarines, cyanuric chloride, picolines, quinolines, and thiazoles in heterocylics. 

The preparation of thiols by S ,2 attack of nucleophilic HS on an alkyl halide gives poor yields because the mercaptan loses a proton to form an anion, RS, which reacts with a second molecule of alkyl halide to form a thioether. 

The lower members of the homologous series of 1. Alcohols 2. Aldehydes 3. Ketones 4. Acids 5. Esters 6. Phenols 7. Anhydrides 8. Amines 9. Nitriles 10. Polyhydroxy phenols 1. Polybasic acids and hydro-oxy acids. 2. Glycols, poly-hydric alcohols, polyhydroxy aldehydes and ketones (sugars) 3. Some amides, ammo acids, di-and polyamino compounds, amino alcohols 4. Sulphonic acids 5. Sulphinic acids 6. Salts 1. Acids 2. Phenols 3. Imides 4. Some primary and secondary nitro compounds oximes 5. Mercaptans and thiophenols 6. Sulphonic acids, sulphinic acids, sulphuric acids, and sul-phonamides 7. Some diketones and (3-keto esters 1. Primary amines 2. Secondary aliphatic and aryl-alkyl amines 3. Aliphatic and some aryl-alkyl tertiary amines 4. Hydrazines 1. Unsaturated hydrocarbons 2. Some poly-alkylated aromatic hydrocarbons 3. Alcohols 4. Aldehydes 5. Ketones 6. Esters 7. Anhydrides 8. Ethers and acetals 9. Lactones 10. Acyl halides 1. Saturated aliphatic hydrocarbons Cyclic paraffin hydrocarbons 3. Aromatic hydrocarbons 4. Halogen derivatives of 1, 2 and 3 5. Diaryl ethers 1. Nitro compounds (tertiary) 2. Amides and derivatives of aldehydes and ketones 3. Nitriles 4. Negatively substituted amines 5. Nitroso, azo, hy-drazo, and other intermediate reduction products of nitro com-pounds 6. Sulphones, sul-phonamides of secondary amines, sulphides, sulphates and other Sulphur compounds... 

The hydroxyl groups on glycols undergo the usual alcohol chemistry giving a wide variety of possible derivatives. Hydroxyls can be converted to aldehydes, alkyl halides, amides, amines, azides, carboxylic acids, ethers, mercaptans, nitrate esters, nitriles, nitrite esters, organic esters, peroxides, phosphate esters, and sulfate esters (6,7). 

Reversible blocking of SH groups can be obtained through the formation of unsymmetrical disulfides with a variety of sulfenyl halides, for example, 4-nitrophenylsulfenyI chloride (177), SS cleavage with trisodium phosphorothioate (178), or protection with mercury compounds such as p-mercury benzoic acid (179). In each case the free SH groups can be regenerated with mercaptans. 

Aromatic compounds are usually readily alkylated or acylated by a Friedel-Crafts reaction.150 The combination of reagents used most commonly for aromatic alkylation is an alkyl halide with a strong Lewis acid (Equation 7.65). However, alkenes, alcohols, mercaptans, and a number of other types of organic... 

Furfuryl mercaptan cannot be prepared according to the classical method using furfuryl chloride and potassium sulfide.2 It has been prepared by reduction of 2-furfuryl disulfide, obtained from furfural and ammonium hydrosulfide.3 The mercaptan has also been obtained in 33% yield 2 by the reaction of furfuryl chloride with thiourea and subsequent decomposition of the intermediate S-2-furfurylisothiourea according to the general method described in Organic Syntheses.4 In the present method, which has been published previously, the use of the very unstable and difficultly available furfuryl halides is avoided.6... 

The formation of mercaptans directly from alcohols may be applied to the preparation of a large number of mercaptans, but usually much longer reaction periods or higher temperatures and higher concentrations of hydrogen halides are required. Under such conditions the furan ring is destroyed. 

---