Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

2 -furanone, 5-Methyl

DIMETHYL-3-HYDROXY 3(2H)>FURANON 5-METHYL-2-ETHYL-4-HYDROXY 3(2H)-FURANON 2,5-D METHYL-4-METHOXY 3(2HFFURANON 3-METHYL CYCLOPENT -2-EN-2-OL-1-ON... [Pg.394]

H)-Furanone, 5-methyl- 4-hydroxy-3-pentenoic acid lactone a-angelica lactone ... [Pg.1079]

Dihydro-2(3/f)-furanone Dihydro-5-methyl-2(3fT)-furanone 5-Methyl-2-furfural 2-Thiophenecarboxaldehyde 2-Acetylthiophene 5-Methyl-2-thiophenecarboxaldehyde ... [Pg.422]

The volatiles of fresh pineapple (Ananas comosus [L] Merr.) crown, pulp and intact fmit were studied by capillary gas chromatography and capillary gas chromatography-mass spectrometry. The fnjit was sampled using dynamic headspace sampling and vacuum steam distillation-extraction. Analyses showed that the crown contains Cg aldehydes and alcohols while the pulp and intact fruit are characterized by a diverse assortment of esters, h rocarbons, alcohols and carbonyl compounds. Odor unit values, calculated from odor threshold and concentration data, indicate that the following compounds are important contributors to fresh pineapple aroma 2,5-dimethyl-4-hydroxy-3(2H)-furanone, methyl 2-methybutanoate, ethyl 2-methylbutanoate, ethyl acetate, ethyl hexanoate, ethyl butanoate, ethyl 2-methylpropanoate, methyl hexanoate and methyl butanoate. [Pg.223]

The direct combination of selenium and acetylene provides the most convenient source of selenophene (76JHC1319). Lesser amounts of many other compounds are formed concurrently and include 2- and 3-alkylselenophenes, benzo[6]selenophene and isomeric selenoloselenophenes (76CS(10)159). The commercial availability of thiophene makes comparable reactions of little interest for the obtention of the parent heterocycle in the laboratory. However, the reaction of substituted acetylenes with morpholinyl disulfide is of some synthetic value. The process, which appears to entail the initial formation of thionitroxyl radicals, converts phenylacetylene into a 3 1 mixture of 2,4- and 2,5-diphenylthiophene, methyl propiolate into dimethyl thiophene-2,5-dicarboxylate, and ethyl phenylpropiolate into diethyl 3,4-diphenylthiophene-2,5-dicarboxylate (Scheme 83a) (77TL3413). Dimethyl thiophene-2,4-dicarboxylate is obtained from methyl propiolate by treatment with dimethyl sulfoxide and thionyl chloride (Scheme 83b) (66CB1558). The rhodium carbonyl catalyzed carbonylation of alkynes in alcohols provides 5-alkoxy-2(5//)-furanones (Scheme 83c) (81CL993). The inclusion of ethylene provides 5-ethyl-2(5//)-furanones instead (82NKK242). The nickel acetate catalyzed addition of r-butyl isocyanide to alkynes provides access to 2-aminopyrroles (Scheme 83d) (70S593). [Pg.135]

Dodecyloxy-3-(2-chloroethyl)-2-methyl-4//-pyrido[l,2-n]pyrimidin-4-one 317 was obtained by cyclization of 3- l-[(3-dodecyloxy-2-pyridyl)ami-no]ethylidene -4,5-dihydro-2(3//)-furanone (316) in boiling POCI3 (95MIP4). [Pg.236]

The proposed mechanism for the conversion of the furanone 118 to the spiro-cyclic lactones 119 and 120 involves electron transfer to the a -unsaturated methyl ester electrophore to generate an anion radical 118 which cyclizes on the /3-carbon of the furanone. The resulting radical anion 121 acquires a proton, giving rise to the neutral radical 122, which undergoes successive electron transfer and protonation to afford the lactones 119 and 120 (Scheme 38) (91T383). [Pg.130]

The stereoselective introduction of two methyl groups into / -(- -)-5-hydroxy-methyl-2(5// )-furanone 143 was effected by tritylation followed by the conjugated addition (87JOC1170) of McaCuLi (TMSCl/EtaO, -78°C) and, finally, treatment with LiN(TMS)2/MeI (Scheme 43) (97TL1439). [Pg.132]

In any form of analysis it is important to determine the integrity of the system and confirm that artefacts are not produced as a by-product of the analytical procedure. This is particularly important in enantiomeric analysis, where problems such as the degradation of lactone and furanon species in transfer lines has been reported (40). As chromatography unions, injectors, splitters, etc. become more stable and greater degrees of deactivation are possible, problems of this kind will hopefully be reduced. Some species, however, such as methyl butenol generated from natural emissions, still remain a problem, undergoing dehydration to yield isoprene on some GC columns. [Pg.65]

Chemical Name succinic acid monoester with 4-[2-(1-hydroxyethyl)-3-methyl-5-benzo-furanyl] -2(5H)-furanone... [Pg.141]

A rapid and efficient one-pot synthesis of substituted 2(5H)-furanones has been reported starting from 3-hydroxy-3-methyl-2-butanone 88 and ethyl... [Pg.230]

CN (35-cij)-3-ethyldihydro-4-[(l-meihyl-l//-imidazol-5-yl)methyl]-2(3/f)-furanone monohydrochloride... [Pg.1634]

Rapid reactions of linalool with OH radicals, NO3 radicals, and ozone in which the major products were acetone and 5-ethenyldihydro-5-methyl-2(3//)-furanone (Shu et al. 1997). [Pg.17]

The photo [2 + 2] reaction between 5-methyl-2,3-dihydro-3-furanone (80) and methyl P-acetoxyacrylate (81) afforded a mixture of four adducts, from which the lactone (82) was isolated. The lactone (82) was reduced to the alcohol (53), which would rearrange quantitatively to the lactone aldehyde (84) upon treatment with... [Pg.98]

Two molecules of carbon monoxide were successively incorporated into an epoxide in the presence of a cobalt catalyst and a phase transfer agent [29]. When styrene oxide was treated with carbon monoxide (0.1 MPa), excess methyl iodide, NaOH (0.50 M), and catalytic amounts of Co2(CO)8 and hexadecyltrimethylammonium bromide in benzene, 3-hydroxy-4-phenyl-2(5H)-furanone was produced in 65% yield (Scheme 7). A possible reaction mechanism was proposed as shown in Scheme 8 Addition of an in situ... [Pg.233]

Bromo-2-propenyl)-4-methyl-y-butyrolactone 2(3H)-Furanone, 5-(2-bromo-2-propenyl)dihydro-5-methyl- (13) (138416-14-5)... [Pg.216]

PHOTOINDUCED-ADDITION OF METHANOL TO (5S)-(5-0-tert-BUTYLDIMETHYLSILOXYMETHYL)FURAN-2(5H)-ONE (4R,5S)-4-HYDROXYMETHYL-(5-0-tert-BUTYLDIMETHYLSILOXYMETHYL)FURAN-2(5H)-ONE (2(5H)-Furanone, 5-[[[(1,1-dimethylethyl)dimethylsilyl]oxy]methyl]-, (S)-and D-erythro-Pentonic acid, 2,3-dideoxy-5-0-[(1,1-dimethylethyl)dimethylsilyl]-3-(hydroxymethyl)-, y-lactone)... [Pg.217]

Thermolysis of D-fructose in acid solution provides 11 and 2-(2-hydrox-yacetyl)furan (44) as major products. Earlier work had established the presence of 44 in the product mixtures obtained after acid-catalyzed dehydrations of D-glucose and sucrose. Eleven other products were identified in the D-fructose reaction-mixture, including formic acid, acetic acid, 2-furaldehyde, levulinic acid, 2-acetyl-3-hydroxyfuran (isomaltol), and 4-hydroxy-2-(hydroxymethyl)-5-methyl-3(2//)-furanone (59). Acetic acid and formic acid can be formed by an acid-catalyzed decomposition of 2-acetyl-3-hydroxyfuran, whereas levulinic acid is a degradation prod-uct of 11. 2,3-Dihydro-3,5-dihydroxy-6-methyl-4//-pyran-4-one has also been isolated after acid treatment of D-fructose.The pyranone is a dehydration product of the pyranose form of l-deoxy-D-eo f o-2,3-hexodiulose. In aqueous acid seems to be the major reaction product of the pyranone. [Pg.286]

The formation of oxygen-containing heterocyclic compounds is also a consequence of the Maillard reaction. Amines and amino acids have a catalytic effect upon the formation of 2-furaldehyde (5), 5-(hydroxy-methyl)-2-furaldehyde (11),2-(2-hydroxyacetyl)furan (44),2 and 4-hy-droxy-5-methyl-3(2//)-furanone (111) (see Ref. 214). This catalytic effect can be observed with several other non-nitrogenous products, including maltol. The amino acid or amine catalysis has been attributed to the transient formation of enamines or immonium ions, or the 1,2-2,3 eno-lization of carbohydrates. Of interest is the detection of A -(2-furoyl-... [Pg.318]

Labeling experiments with l-deoxy-l-(dibenzylamino)-D-[l- C]-aruI>-mo-2-hexulosuronic acid [l- C] 112 indicated that the C label corresponded to the 5-methyl group of 111 (see Ref. 234). This is also consistent with a l-deoxy-2,3-dicarbonyl intermediate (115), and indicates that 111 is a decarboxylation product (see Scheme 22). The precise step entailing decarboxylation has not yet been determined. The carboxyl group could be carried through to ring closure (furanone formation). Such a step would provide a 2-carboxylate which is a /3-keto acid subject to ready decarboxylation. The labeling information and the initial steps of the mechanism in Scheme 22 are also consistent with the formation of 111 from D-[l- C]ribose and a secondary amine. ... [Pg.320]

Scheme 22.—Mechanism for the Formation of 4-Hydroxy-5-methyl-3(2/f)-furanone. Scheme 22.—Mechanism for the Formation of 4-Hydroxy-5-methyl-3(2/f)-furanone.
An effort has also been made to determine the structure of products providing coloration in the Maillard reaction prior to melanoidin formation. The reaction between D-xylose and isopropylamine in dilute acetic acid produced 2-(2-furfurylidene)-4-hydroxy-5-methyl-3(2/f)-furanone (116). This highly chromophoric product can be produced by the combination of 2-furaldehyde and 4-hydroxy-5-methyl-3(2//)-furanone (111) in an aqueous solution containing isopropylammonium acetate. The reaction between o-xylose and glycine at pH 6, under reflux conditions, also pro-duces " 116. Other chromophoric analogs may be present, including 117,... [Pg.322]


See other pages where 2 -furanone, 5-Methyl is mentioned: [Pg.453]    [Pg.454]    [Pg.454]    [Pg.454]    [Pg.1612]    [Pg.1613]    [Pg.1613]    [Pg.1613]    [Pg.475]    [Pg.467]    [Pg.318]    [Pg.115]    [Pg.117]    [Pg.120]    [Pg.120]    [Pg.127]    [Pg.132]    [Pg.157]    [Pg.44]    [Pg.182]    [Pg.241]    [Pg.2355]    [Pg.367]    [Pg.185]    [Pg.113]    [Pg.66]    [Pg.37]    [Pg.212]    [Pg.220]    [Pg.54]    [Pg.825]    [Pg.290]    [Pg.318]    [Pg.320]    [Pg.321]   
See also in sourсe #XX -- [ Pg.2 , Pg.3 , Pg.46 , Pg.318 ]




SEARCH



2 -furanone, 3-Ethyl dihydro-4-[(1- methyl

2-Hexyl-5-methyl-3 -furanone

3 -Furanon

3 -Furanone from methylated sugars

3- Methyl-2 -furanones

4- Hydroxy-5-methyl-3 -furanone identification

4-Hydroxy-5-methyl-3 -furanone

4-Hydroxy-5-methyl-3 -furanone formation

5- Hydroxymethyl-4-methyl-2 -furanone

5-Alkoxy-3-methyl-2 -furanones

5-Ethyl-3-hydroxy-4-methyl-2 -furanone

5-Ethyl-4-hydroxy-2-methyl-3 -furanon

5-Ethylthio-4-methyl-2 -furanone formation of anion and alkylation

Hydroxy-4-methyl-2(5H)-furanone

Methyl 3 -furanone-2-carboxylate

© 2024 chempedia.info