Formic acid, determination

A similar formula represents the vapor densities of acetic acid observed by Cahours, Bineau, Horstmann, Troost, Naumann, Playfair, and Wanklyn another the vapor densities of formic acid, determined by Bineau. 

Momany F A 1978 Determination of partial atomic charges from ab initio molecular electrostatic potentials. Application to formamide, methanol and formic acid J. Phys. Chem. 82 592... 

The use of penodic acid oxidation m structure determination can be illustrated by a case m which a previously unknown methyl glycoside was obtained by the reaction of D arabmose with methanol and hydrogen chlonde The size of the nng was identified as five membered because only one mole of penodic acid was consumed per mole of glycoside and no formic acid was produced Were fhe nng six membered fwo moles of penodic acid would be required per mole of glycoside and one mole of formic acid would be produced... 

Furfural was first isolated in the eady nineteenth century. Dobereiner is credited with the discovery. He obtained a small amount of a yellow "oil" (too Htde to characterize) as a by-product in the preparation of formic acid (8). Other chemists found that the same "oil" having a charactedstic aroma could be obtained by boiling finely divided vegetable materials such as oats, com, sawdust, bran, etc, with aqueous sulfuric acid or other acids (9,10). The oil was present in the Hquid resulting from condensation of the vapors produced during heating. The empirical formula was determined by Stenhouse... 

Procedures for determining the quaUty of formaldehyde solutions ate outlined by ASTM (120). Analytical methods relevant to Table 5 foUow formaldehyde by the sodium sulfite method (D2194) methanol by specific gravity (D2380) acidity as formic acid by titration with sodium hydroxide (D2379) iron by colorimetry (D2087) and color (APHA) by comparison to platinum—cobalt color standards (D1209). 

Methanol can be converted to a dye after oxidation to formaldehyde and subsequent reaction with chromatropic acid [148-25-4]. The dye formed can be deterruined photometrically. However, gc methods are more convenient. Ammonium formate [540-69-2] is converted thermally to formic acid and ammonia. The latter is trapped by formaldehyde, which makes it possible to titrate the residual acid by conventional methods. The water content can be determined by standard Kad Eischer titration. In order to determine iron, it has to be reduced to the iron(II) form and converted to its bipyridyl complex. This compound is red and can be determined photometrically. Contamination with iron and impurities with polymeric hydrocyanic acid are mainly responsible for the color number of the merchandized formamide (<20 APHA). Hydrocyanic acid is detected by converting it to a blue dye that is analyzed and deterruined photometrically. 

The vapor is thea withdrawa from the stiH as distillate. The changing Hquid composition is most coavenieafly described by foUowiag the trajectory (or residue curve) of the overall composition of all the coexistiag Hquid phases. An exteasive amouat of valuable experimental data for the water—acetoae—chloroform mixture, including biaary and ternary LLE, VLE, and VLLE data, and both simple distillation and batch distillation residue curves are available (93,101). Experimentally determined simple distillation residue curves have also been reported for the heterogeneous system water—formic acid—1,2-dichloroethane (102). 

Nucleophilic substitution in cyclohexyl systems is quite slow and is often accompanied by extensive elimination. The stereochemistry of substitution has been determined with the use of a deuterium-labeled substrate (entry 6). In the example shown, the substitution process occurs with complete inversion of configuration. By NMR amdysis, it can be determined that there is about 15% of rearrangement by hydride shift accon any-ing solvolysis in acetic acid. This increases to 35% in formic acid and 75% in trifiuoroacetic acid. The extent of rearrangement increases with decreasing solvent... 

Shifts in the SEC fractionation range are not new. It has been known for decades that adding chaotropes to mobile phases causes proteins to elute as if they were much larger molecules. Sodium dodecyl sulfate (SDS) (9) and guanidinium hydrochloride (Gd.HCl) (9-12) have been used for this purpose. It has not been clearly determined in every case if these shifts reflect effects of the chaotropes on the solutes or on the stationary phase. Proteins are denatured by chaotropes the loss of tertiary structure increases their hydrodynamic radius. However, a similar shift in elution times has been observed with SEC of peptides in 0.1% trifluoroacetic acid (TEA) (13-15) or 0.1 M formic acid (16), even if they were too small to have significant tertiary structure. Speculation as to the cause involved solvation effects that decreased the effective pore size of the... 

That the reduction with formic acid proceeds by a hydride transfer reaction was proposed by Lukes and Ji2ba 100) and finally proven by Leonard and Sauers 63). The use of variously deuterated formic acid allowed Leonard and Sauers to determine that (1) protonation or... 

Thus, if triose reductone is, in fact, the first intermediate in the periodate oxidation of malonaldehyde, the total consumption of periodate per mole of malonaldehyde should be four molar equivalents two moles of formic acid and one mole of carbon dioxide should be formed, in accordance with the sequence proposed by Fleury and his collaborators (22). As in the case of the periodate oxidation of malonic acid (32) the rate determining step should be the hydroxylation step. 

An experiment is performed to determine the vapor pressure of formic acid. A 30.0-L volume of helium gas at 20.0°C is passed through 10.00 g of liquid formic acid (HCOOH) at 20.0°C. After the experiment, 7.50 g of liquid formic acid remains. Assume that the helium gas becomes saturated with formic acid vapor and the total gas volume and temperature remain constant. What is the vapor pressure of formic acid at 20.0°C ... 

Determination as metallic platinum Discussion. The platinum solution is treated with formic acid, best at pH 6, and the precipitated platinum weighed. A 2 per cent solution of hypophosphorous (phosphinic) acid may also be used as the reducing agent. 

Isothermal a—time curves were sigmoid [1024] for the anhydrous Ca and Ba salts and also for Sr formate, providing that nucleation during dehydration was prevented by refluxing in 100% formic acid. From the observed obedience to the Avrami—Erofe ev equation [eqn. (6), n = 4], the values of E calculated were 199, 228 and 270 kJ mole"1 for the Ca, Sr and Ba salts, respectively. The value for calcium formate is in good agreement with that obtained [292] for the decomposition of this solid dispersed in a pressed KBr disc. Under the latter conditions, concentrations of both reactant (HCOJ) and product (CO3") were determined by infrared measurements and their variation followed first-order kinetics. 

Iodine was determined by an iodometric titration adapted from White and Secor.(3) Instead of the normal Carius combustion, iodide was separated from the samples either by slurrying in 6M NaOH, or by stirring the sample with liquid sodium-potassium (NaK) alloy, followed by dissolving excess NaK in ethanol. Precipitated plutonium hydroxides were filtered. Iodine was determined in the filtrate by bromine oxidation to iodate in an acetate buffer solution, destruction of the excess bromine with formic acid, acidifying with SO, addition of excess KI solution, and titrating the liberated iodine with standard sodium thiosulfate. The precision of the iodine determination is estimated to be about 5% of the measured value, principally due to incomplete extraction of iodine from the sample. 

For the determination of the molecular weight (Mw) by light scattering, the number of solvent systems is limited. The refractive index difference should be at least 0.1 and the solvent should not have an electrolytic effect. Useful solvents include formic acid containing KC1 salt and fluorinated alcohols. 

Aliphatic PAs dissolve well in m-cresol, formic acid (85-90%), and concentrated sulfuric acid (96-98%). Industry usually determines the relative viscosity ((/rd) of a 1% solution in concentrated sulfuric acid. The inherent viscosity (r/inh) is... 

Carboxylic acids are named systematically by replacing the -e of the parent hydrocarbon by the suffix -oic acid the carbon atom of the carboxyl group is included in the count of atoms to determine the parent hydrocarbon molecule. Thus, formic acid is formally methanoic acid, and acetic acid is ethanoic acid. 

With this relationship for all samples was calculated from ninh This M is used for evaluating the reaction data. The ultracen rifuge (u.c measurements were carried out in a Spinco model E analytical ultracentrifuge, with 0.4% solutions in 90% formic acid containing 2.3 M KCl. By means of the sedimenta- ion diffusion equilibrium method of Scholte (13) we determine M, M and M. The buoyancy factor (1- vd = -0.086) necessary for tSe calculation of these molecular weights from ultracentrifugation data was measured by means of a PEER DMA/50 digital density meter. 

In its reactions SsO shows properties typical for both sulfur homocycles and sulfoxides. With elemental chlorine SOCI2 and S2CI2 are formed, with bromine SOBr2 and S2Br2 are obtained. Water decomposes SsO to H2S and SO2 besides elemental sulfur while cyanide ions expectedly produce thiocyanate. The reaction with iodide in the presence of formic acid is used for the iodometric determination of the oxygen content [70] ... 

The molecular mass of the protein was redetermined by infusing a 5-10 pmolp.l solution of the protein in 50% aqueous acetonitrile containing 0.2% formic acid at a flow rate of 6 p,lmin into an electrospray source. The scan rate employed on the mass spectrometer was from m/z 60 to m/z 1800 in 12 s. This is a relatively slow scan speed which will lead to a more precise molecular weight determination. Scan speeds of this order may be, and indeed should be, utilized for infusion experiments if sufficient sample is available but it is unlikely to be feasible when chromatographic separations, particularly those involving capillary columns, are employed because of the restriction imposed by the chromatographic peak width (see Section 3.5.2.1 above). 

Dissolution/reprecipitation processes were evaluated for the recycling of poly-epsilon-caprolactam (PA6) and polyhexamethyleneadipamide (PA66). The process involved solution of the polyamide in an appropriate solvent, precipitation by the addition of a non-solvent, and recovery of the polymer by washing and drying. Dimethylsulphoxide was used as the solvent for PA6, and formic acid for PA66, and methylethylketone was used as the non-solvent for both polymers. The recycled polymers were evaluated by determination of molecular weight, crystallinity and grain size. Excellent recoveries were achieved, with no deterioration in the polymer properties. 33 refs. 

The quantitative analyses of reaction products due to partial or complete oxidation can be performed by different methods. This type of determination is essential to improve electrode composition. Apart from a decrease in the Coulombic efficiency (see Section 11.2), the formation of partially oxidized products can be deleterious for the DMFC application because some of these products (e.g., formic acid) may be in liquid form and are corrosive. 

---