Fluorination overview

K. A. Epstein and co-workers, "Fluorinated Ferroelectric Liquid Crystals Overview and Synthesis," Eleventh Winter Fluorine Conference, St. Petersburg, Fla., 1993. 

An overview is presented of plutonium process chemistry at Rocky Flats and of research in progress to improve plutonium processing operations or to develop new processes. Both pyrochemical and aqueous methods are used to process plutonium metal scrap, oxide, and other residues. The pyrochemical processes currently in production include electrorefining, fluorination, hydriding, molten salt extraction, calcination, and reduction operations. Aqueous processing and waste treatment methods involve nitric acid dissolution, ion exchange, solvent extraction, and precipitation techniques. 

FIGURE 2.1. Overview of Fluorine Chemical Shifts (relative to CFC13 (8 = 0))... 

Various other biphasic solutions to the separation problem are considered in other chapters of this book, but an especially attractive alternative was introduced by Horvath and co-workers in 1994.[1] He coined the term catalysis in the fluorous biphase and the process uses the temperature dependent miscibility of fluorinated solvents (organic solvents in which most or all of the hydrogen atoms have been replaced by fluorine atoms) with normal organic solvents, to provide a possible answer to the biphasic hydroformylation of long-chain alkenes. At temperatures close to the operating temperature of many catalytic reactions (60-120°C), the fluorous and organic solvents mix, but at temperatures near ambient they phase separate cleanly. Since that time, many other reactions have been demonstrated under fluorous biphasic conditions and these form the basis of this chapter. The subject has been comprehensively reviewed, [2-6] so this chapter gives an overview and finishes with some process considerations. 

The trend of discovering the analytical field of environmental analysis of surfactants by LC-MS is described in detail in Chapters 2.6-2.13 and also reflected by the method collection in Chapter 3.1 (Table 3.1.1), which gives an overview on analytical determinations of surfactants in aqueous matrices. Most methods have focused on high volume surfactants and their metabolites, such as the alkylphenol ethoxylates (APEO, Chapter 2.6), linear alkylbenzene sulfonates (LAS, Chapter 2.10) and alcohol ethoxylates (AE, Chapter 2.9). Surfactants with lower consumption rates such as the cationics (Chapter 2.12) and esterquats (Chapter 2.13) or the fluorinated surfactants perfluoro alkane sulfonates (PFAS) and perfluoro alkane carboxylates (PFAC) used in fire fighting foams (Chapter 2.11) are also covered in this book, but have received less attention. 

Fig. 2.9.44. ESI-FIA-MS(+) overview spectra of partly fluorinated non-ionic surfactant blend with the general formula C F2n+1-(CH2-CH2-0)m-H identical with CnF2n+1-CH CHa-O-CCHa-Cttj-O -j-H [16],... 

Fig. 2.12.7. FIA-ESI-MS(+) overview spectrum of fluorinated cationic surfactant of quat type CnF2n+1-S02-NH-CH2-CH2-CH2-N (CH3)3X- [37],...

This chapter intends to briefly overview, for each of the major areas of uses of per-fluorochemicals (PFCs) in medicine, biology, and biochemistry, the medical needs and therapeutic objectives the challenges facing product definition and development the solutions and products that are or could be provided by PFC-based materials as well as some present research trends and perspectives. The increasing number of pharmaceuticals and agrochemicals that contain individual fluorine atoms or trifluoromethyl groups is out of the scope of this chapter [1,2]. 

The aim of this section is to present a concise overview of separation, concentration and decomposition methods for sample pre-treatment and an overview of the analytical methods available for determining free inorganic fluoride and total fluorine in the environment (natural and drinking water, air and soil), biological and related materials, and fluoride supplements and dental products. 

K.L. Kirk, Selective fluorination in drug design and development, an overview of biochemical rationales, Curr. Top. Med. Chem. 6 (2006) 1447-1456. 

The confusion between these two characteristics is common in medicinal chemistry. It comes from the usual empirical measurement of the lipophilicity, which is the logarithm of the partition coefficient between 1-octanol and water (log P). This parameter gives a representative overview of a compound absorbed by a lipidic membrane, an essential datum in medicinal chemistry. It is often considered that the higher the log P value is, the more lipophilic the compound is. Acmally, the log P value is only a measurement of relative solubility. Considering that the solubility of a fluorinated substance decreases more in water than in octanol, this measurement leads one to think that fluorinated compounds are more lipophilic. Actually, this represents the relative lack of affinity of fluorinated compounds for both phases. 

---