Filter graphite

Gelatin, trace elements in glass, glass filters, graphite, synthetic materials... 

A carbonated slurry of cyanamide solution, solid calcium carbonate, and graphite is cooled to remove the heat of reaction. Part of the slurry is recycled to faciUtate temperature control whereas the remainder is filtered yielding cyanamide solution and a cake of calcium carbonate and graphite. The filtered solution is also recycled ia order to control the soHds content. The final concentration of cyanamide is normally maintained at 25%. 

Graphite [7782-42-5]. Treated with hot 1 1 HCl. Filtered, washed, dried, powdered and heated in an evacuated quartz tube at 1000° until a high vacuum was obtained. Cooled and stored in an atmosphere of helium [Craig, Van Voorhis and Bartell 7 Phys Chem 60 1225 1956]. 

Zebiihr et al. (29) developed an automated system for determining PAHs, PCBs and PCDD/Fs by using an aminopropyl silica column coupled to a porous graphitic carbon column. This method gives five fractions, i.e. aliphatic and monoaromatic hydrocarbons, polycyclic aromatic hydrocarbons, PCBs with two or more ortho-chlorines, mono-ort/io PCBs, and non-ortho PCBs and PCDD/Fs. This method employed five switching valves and was successfully used with extracts of sediments, biological samples and electrostatic filter precipitates. 

Another filtration approach concerns the addition of a filter aid after reaction, like powered cellulose, celite or powdered graphite [6a]. The solution is filtered and the catalytic behaviour of both components, solution and filter aid, is then tested and compared with the catalytic behaviour before the filter aid addition. This methodology was first described by Maitlis and co-workers for distinguishing a heterogeneous component in a starting... 

D. Wienke, T. Vijn and L. Buydens, Quality self-monitoring of intelligent analyzers and sensor based on an extended Kalman filter an application to graphite furnace atomic absorption spectroscopy. Anal. Chem., 66 (1994) 841-849. 

Separation and detection methods The common methods used to separate the Cr(III)/(VI) species are solvent extraction, chromatography and coprecipitation. In case of Cr(VI) from welding fumes trapped on a filter, a suitable leaching of the Cr(VI) from the sample matrix is needed, without reducing the Cr(VI) species. The most used detection methods for chromium are graphite furnace AAS, chemiluminescence, electrochemical methods, ICP-MS, thermal ionization isotope dilution mass spectrometry and spectrophotometry (Vercoutere and Cornelis 1995)- The separation of the two species is the most delicate part of the procedure. 

Bi promoted Pt catalysts were prepared using JM proprietary methods. Aqueous solutions of Pt and Bi salts were co-precipitated onto the catalyst support and reduced using chemical reducing agents. Thereafter the materials were washed, filtered and retained as pastes. Graphite supported materials were dried prior to use. Similar preparation methods were used for all Pt and Pt-Bi catalysts. 

Air (particulate lead) Collection of particulate matter onto membrane filter wet ashing with HN03/ HCI04/ H2S04 dissolution in acetate buffer ASV with mercury-graphite electrode (Method P CAM 191) 0.16 pg/m3 90-110 NIOSH 1977c... 

Wakabayashi et al. [51] determined penicillamine in serum by HPLC. Serum (0.1 mL) was vortex-mixed for 30 s with 50 pL of 0.1% EDTA and 0.2 mL of 10% TCA. The solution was centrifuged at 1500 x g and filtered. A 5 pL portion was analyzed on a Shodex C18 column (15 cm x 4.6 mm i.d.), using a mobile phase of 19 1 methanolic 0.05 M phosphate buffer (pH 2.8) containing 1 mM sodium octylsulfate and 10 pM EDTA. Liver or kidney samples were similarly extracted, and the extracts were cleaned up on a Bond-Elut cartridge prior to HPLC analysis. Detection was effected with an Eicom WE-3G graphite electrode maintained at +0.9 V versus Ag/AgCl. The calibration graph was linear up to 500 ng, and the detection limits were 20 pg. For 1 pg of penicillamine added to serum, liver, or kidney, the respective relative standard deviations (n = 5) were 3.6, 5.1, and 4.4%. 

Webb et al. [56] determined free penicillamine in the plasma of rheumatoid arthritis patients. Plasma ultrafiltrate was mixed with trichloroacetic acid and 4-aminobenzoic acid as internal standards, and HPLC mobile phase to determine total reduced penicillamine. Plasma was vortexed with trichloroacetic acid, the precipitated protein was removed after 15 min by centrifuging, and the supernatant solution was filtered and mixed with 4-aminobenzoic acid. In each instance, a 50-pL portion of solution was analyzed on a 25-cm column of Spherisorb-NH2 (5 pm) at 25 °C, with an electrochemical detector having dual porous graphite electrodes set at... 

Halliday et al. [396] have described a simple rapid graphite furnace method for the determination of lead in amounts down to 1 xg/l in polluted seawater. The filtered seawater is diluted with an equal volume of deionised water, ammonium nitrate added as a matrix modifier, and aliquots of the solution injected into a tantalum-coated graphite tube in an HGA-2200 furnace atomiser. The method eliminates the interference normally attributable to the ions commonly present in seawater. The results obtained on samples from the Firth of Forth (Scotland, UK) were in good agreement with values determined by anodic stripping voltammetry. 

One of the more important considerations in determining the end use of synthetic graphite is its contamination with metallic components Metals such as iron, vanadium, and especially in nuclear applications, boron are deleterious to the performance of graphite Table 3 presented the extraction yields of NMP-soluble material for three bituminous coals. For these coals, mineral matter and insoluble coal residue were separated from the extract by simple filtration through 1-2 pm filter paper fable 13 lists the high-temperature ash content in the dry coal, and in their corresponding NMP-insoluble and NMP-soluble products. The reduced ash content of the extract is typically between 0.1 to 0.3 wt% using traditional filtration techniques for the small-scaled extraction experiments... 

---