Fatty acid reducing agents

Mechanisms by which nature in vivo oxidises (Figure 8) unsaturated fatty acids by the action of oxygen, iron and ascorbic acid (reducing agent) are being translated and adopted for usage in both water borne and solvent based alkyd systems. 

Unsaturated fatty acids have been shown to suppress XDH levels and its rate of synthesis in the chick pancreas (13,14). No effect was observed in chick liver. However, this observation was in error because of the age of the chicks used. When newly hatched chicks are maintained on diets supplemented with fatty acids for more than one week or when older chicks are used, liver XDH levels are reduced about 50% (11). These substances reduce the induction effect of all other agents tested, including allopurinol, adenine, and high protein diets (see Figures 3 and 4). In each case the fatty acid reduced activity by about 50%. 

Residual monomers in the latex are avoided either by effectively reacting the monomers to polymer or by physical or chemical removal. The use of tert-huty peroxypivalate as a second initiator toward the end of the polymeri2ation or the use of mixed initiator systems of K2S20g and tert-huty peroxyben2oate (56) effectively increases final conversion and decreases residual monomer levels. Spray devolatili2ation of hot latex under reduced pressure has been claimed to be effective (56). Residual acrylonitrile also can be reduced by postreaction with a number of agents such as monoamines (57) and dialkylamines (58), ammonium—alkali metal sulfites (59), unsaturated fatty acids or their glycerides (60,61), their aldehydes, esters of olefinic alcohols, cyanuric acid (62,63), andmyrcene (64). 

Nitrile Intermediates. Most quaternary ammonium compounds are produced from fatty nitriles (qv), which are ia turn made from a natural fat or oil-derived fatty acid and ammonia (qv) (Fig. 2) (see Fats AND FATTY oils) (225). The nitriles are then reduced to the amines. A variety of reduciag agents maybe used (226). Catalytic hydrogenation over a metal catalyst is the method most often used on a commercial scale (227). Formation of secondary and tertiary amine side-products can be hindered by the addition of acetic anhydride (228) or excess ammonia (229). In some cases secondary amines are the desired products. 

The criteria for choosing inhibitors in this study were the ability to compete with diethanolamine for the nitrite and lack of toxicity. An attempt was made to cover as broad a group as possible within the limits of feasibility. Ascorbic acid in its water soluble form and its oil soluble form, the palmitate, represent the enediols, Sorbate is a diene fatty acid which has been shown to inhibit nitrosation (10), Since the pK of sorbic acid is 4,76, at the pH of these experiments, both water soluble sorbate ion and oil soluble sorbic acid are present in significant amounts. Sodium bisulfite is a strong inorganic reducing agent which has an acceptable lack of toxicity at the concentration... 

Surface-active agents may be added during the processing of films (internal addition) or by surface treatment of the film (external addition). These tend to reduce the surface energy of the film/water droplet interface promoting a continuous film of water thus enhancing transparency. Examples include hydrophilic surfactants, such as sorbitol or glycerol fatty acid mono- or di-esters. 

Support for this conclusion is provided by the hydroperoxide specificity of BP oxidation. The scheme presented in Figure 6 requires that the same oxidizing agent is generated by reaction of h2°2/ peroxy acids, or alkyl hydroperoxides with the peroxidase. Oxidation of any compound by the iron-oxo intermediates should be supported by any hydroperoxide that is reduced by the peroxidase. This is clearly not the case for oxidation of BP by ram seminal vesicle microsomes as the data in Figure 7 illustrate. Quinone formation is supported by fatty acid hydroperoxides but very poorly or not at all by simple alkyl hydroperoxides or H2C>2. The fact that... 

NADPH is a reducing agent that is reserved for biosynthetic pathways—notably fatty acid synthesis. Thus, the HMP pathway is called upon when reducing equivalents and fatty acid synthesis are turned on. Primarily, the regulation of the pathway is through the supply and demand of NADPH. 

The first step is carboxylation of acetyl CoA to malonyl CoA. This reaction is catalyzed by acetyl-CoA carboxylase [5], which is the key enzyme in fatty acid biosynthesis. Synthesis into fatty acids is carried out by fatty acid synthase [6]. This multifunctional enzyme (see p. 168) starts with one molecule of ace-tyl-CoA and elongates it by adding malonyl groups in seven reaction cycles until palmi-tate is reached. One CO2 molecule is released in each reaction cycle. The fatty acid therefore grows by two carbon units each time. NADPH+H is used as the reducing agent and is derived either from the pentose phosphate pathway (see p. 152) or from isocitrate dehydrogenase and malic enzyme reactions. 

In the vertebrates, biosynthesis of fatty acids is catalyzed by fatty add synthase, a multifunctional enzyme. Located in the cytoplasm, the enzyme requires acetyl CoA as a starter molecule. In a cyclic reaction, the acetyl residue is elongated by one C2 unit at a time for seven cycles. NADPH+H is used as a reducing agent in the process. The end product of the reaction is the saturated Cie acid, palmitic acid. 

Antifog agents like fatty acid esters are used to avoid the formation of water droplets on the film under condensation conditions, e.g., in cling film apphcations at the transition from room temperature to a refrigerated warehouse. The antifog agent is hydrophilic and reduces the surface tension of droplets so that a uniform water film does not impair the clarity of the chng film [23]. 

Hydroxylamine is used as a reducing agent in many inorganic and organic synthetic reactions. Other applications of this compound include purification of aldehydes and ketones dehairing of hides as an antioxidant for fatty acids to stabilize lower oxidation states of metal ions for analysis and in photography. 

Most applications of this compound are similar to those of the hydrochloride. It is primarily used as a reducing agent for organic synthesis and chemical analysis. Other uses are to purify aldehydes and ketones to inhibit oxidation of fatty acids in dehairing hides in synthesis of oximes for paints and varnishes in photographic developer solutions in rust proofing and as a catalyst. 

---