Epoxy resin Ethylene propylene diene rubber

MAJOR POLYMER APPLICATIONS ABS, acrylics, cellulose acetate, epoxy resin, ethylene propylene diene copolymer, ethylene vinyl acetate copolymer, polyamide, polycarbonate, polyester, polymethylmethacrylate, polypropylene, polystyrene, polysulfone, polyurethane, polyvinylacetate, polyvinylchloride, proteins, rubber, SB starch ... [Pg.33]

Polyvinyl chloride (PVC), polytetrafluoroethylene (PTFE), polystyrene (PS), polymethylmethacrylate (PMMA) Ethylene-tetratluoro-ethylene (ETFE), tetrafluoroethylene/ hexafluoropropylene (THV), polyethylene (PE), polypropylene (PP) Epoxy resin (EP), polyester resin (UP), phenol resin (PF), resorcin resin (RF), polyurethane (PUR) Styrene-butadiene-rubber (SBR), polybutadiene-rubber (BR), ethylene-propylene-diene-rubber (EPDM)... [Pg.208]

Composition (type of polymeric components). The base polymer (which is to be modified) may be an amorphous polymer [e.g., polystyrene (PS), styrene-acrylonitrile copolymer, polycarbonate, or poly(vinyl chloride)], a semicrystalline polymer [e.g., polyamide (PA) or polypropylene (PP)], or a thermoset resin (e.g., epoxy resin). The modifier may be a rubber-like elastomer (e.g., polybutadiene, ethylene-vinyl acetate copolymer, ethylene-propylene copolymer, or ethylene-propylene-diene copolymer), a core-shell modifier, or another polymer. Even smaller amounts of a compatibilizer, such as a copolymer, are sometimes added as a third component to control the morphology. [Pg.258]

DSC has been applied to the determination of Tg in a variety of other polymers including polyimines [1], polyurethanes (PU) [2], Novolac resins [3], polyisoprene, polybutadiene, polychloroprene, nitrile rubber, ethylene-propylene-diene terpolymer, and butyl rubber [4], and bisphenol-A epoxy diacrylate-trimethylolpropane triacrylate [1516]. [Pg.420]

This technique has found the following applications in addition to those discussed in Sections 10.1 (resin cure studies on phenol urethane compositions) [65], 12.2 (photopolymer studies [66-68]), and 13.3 (phase transitions in PE) [66], Chapter 15 (viscoelastic and rheological properties), and Section 16.4 (heat deflection temperatures) epoxy resin-amine system [67], cured acrylate-terminated unsaturated copolymers [68], PE and PP foam [69], ethylene-propylene-diene terpolymers [70], natural rubbers [71, 72], polyester-based clear coat resins [73], polyvinyl esters and unsaturated polyester resins [74], polyimide-clay nanocomposites [75], polyether sulfone-styrene-acrylonitrile, PS-polymethyl methacrylate (PMMA) blends and PS-polytetrafluoroethylene PMMA copolymers [76], cyanate ester resin-carbon fibre composites [77], polycyanate epoxy resins [78], and styrenic copolymers [79]. [Pg.579]

Tg measurements have been performed on many other polymers and copolymers including phenol bark resins [71], PS [72-74], p-nitrobenzene substituted polymethacrylates [75], PC [76], polyimines [77], polyurethanes (PU) [78], Novolac resins [71], polyisoprene, polybutadiene, polychloroprene, nitrile rubber, ethylene-propylene-diene terpolymer and butyl rubber [79], bisphenol-A epoxy diacrylate-trimethylolpropane triacrylate [80], mono and dipolyphosphazenes [81], polyethylene glycol-polylactic acid entrapment polymers [82], polyether nitrile copolymers [83], polyacrylate-polyoxyethylene grafts [84], Novolak type thermosets [71], polyester carbonates [85], polyethylene naphthalene, 2,6, dicarboxylate [86], PET-polyethylene 2,6-naphthalone carboxylate blends [87], a-phenyl substituted aromatic-aliphatic polyamides [88], sodium acrylate-methyl methacrylate multiblock copolymers [89], telechelic sulfonate polyester ionomers [90], aromatic polyamides [91], polyimides [91], 4,4"-bis(4-oxyphenoxy)benzophenone diglycidyl ether - 3,4 epoxycyclohexyl methyl 3,4 epoxy cyclohexane carboxylate blends [92], PET [93], polyhydroxybutyrate [94], polyetherimides [95], macrocyclic aromatic disulfide oligomers [96], acrylics [97], PU urea elastomers [97], glass reinforced epoxy resin composites [98], PVOH [99], polymethyl methacrylate-N-phenyl maleimide, styrene copolymers [100], chiral... [Pg.97]

Chloroprene rubber or, polychloroprene rubber Chlorotrifluoroethylene ethylene copolymers Cis-polyisoprene or, cis-l,4-polyisoprene Coumarone indene resins Diallyl phthalate Diallyl isophthalate Dough molding compound Elastomeric alloy melt processable rubber Elastomeric alloy thermoplastic vulcanizate Epichlohydrin rubber Epoxy or, epoxide Epoxy or, epoxide, with glass fiber Ethyl cellulose Ethylene acryic acid Ethylene propylene diene monomer (an EPR terpolymer)... [Pg.156]