Enhancer anhydrides

D. Dean. Development of enhanced anhydride coupling agents for wood polymer composites. In WPC Conference 2004 Realizing the Full Potential, Baltimore, MD, October 11-12. 

Donor substituents on the vinyl group further enhance reactivity towards electrophilic dienophiles. Equations 8.6 and 8.7 illustrate the use of such functionalized vinylpyrroles in indole synthesis[2,3]. In both of these examples, the use of acetyleneic dienophiles leads to fully aromatic products. Evidently this must occur as the result of oxidation by atmospheric oxygen. With vinylpyrrole 8.6A, adducts were also isolated from dienophiles such as methyl acrylate, dimethyl maleate, dimethyl fumarate, acrolein, acrylonitrile, maleic anhydride, W-methylmaleimide and naphthoquinone. These tetrahydroindole adducts could be aromatized with DDQ, although the overall yields were modest[3]. 

Despite the anhydride stmcture, it is remarkably stable, surviving addition to the highly alkaline viscose, the acidic coagulating bath, and also resisting multiple laundering of the rayon fabric. The unusual stability may be attributed to the sulfur atoms, which enhance hydrophobicity, and to the stericaHy hindering neopentyl groups that retard hydrolysis. 

Hydration and Dehydration. Maleic anhydride is hydrolyzed to maleic acid with water at room temperature (68). Fumaric acid is obtained if the hydrolysis is performed at higher temperatures. Catalysts enhance formation of fumaric acid from maleic anhydride hydrolysis through maleic acid isomerization. 

In low sohds muds, vinyl acetate—maleic anhydride copolymers were once used to extend or enhance the viscosity of bentonite suspensions (141). This function is largely performed by polyacrylamides. The vinyl acetate—maleic anhydride copolymers can also have a flocculating effect on drill sohds. Concentrations generally are quite low (0.14—0.57 kg/m (0.05—0.2 Ib/bbl)). 

Dicylopentadiene Resins. Dicyclopentadiene (DCPD) can be used as a reactive component in polyester resins in two distinct reactions with maleic anhydride (7). The addition reaction of maleic anhydride in the presence of an equivalent of water produces a dicyclopentadiene acid maleate that can condense with ethylene or diethylene glycol to form low molecular weight, highly reactive resins. These resins, introduced commercially in 1980, have largely displaced OfXv o-phthahc resins in marine apphcations because of beneficial shrinkage properties that reduce surface profile. The inherent low viscosity of these polymers also allows for the use of high levels of fillers, such as alumina tfihydrate, to extend the resin-enhancing, fiame-retardant properties for apphcation in bathtub products (Table 4). 

Physical properties of the acid and its anhydride are summarized in Table 1. Other references for more data on specific physical properties of succinic acid are as follows solubiUty in water at 278.15—338.15 K (12) water-enhanced solubiUty in organic solvents (13) dissociation constants in water—acetone (10 vol %) at 30—60°C (14), water—methanol mixtures (10—50 vol %) at 25°C (15,16), water—dioxane mixtures (10—50 vol %) at 25°C (15), and water—dioxane—methanol mixtures at 25°C (17) nucleation and crystal growth (18—20) calculation of the enthalpy of formation using semiempitical methods (21) enthalpy of solution (22,23) and enthalpy of dilution (23). For succinic anhydride, the enthalpies of combustion and sublimation have been reported (24). 

The performance of many metal-ion catalysts can be enhanced by doping with cesium compounds. This is a result both of the low ionization potential of cesium and its abiUty to stabilize high oxidation states of transition-metal oxo anions (50). Catalyst doping is one of the principal commercial uses of cesium. Cesium is a more powerflil oxidant than potassium, which it can replace. The amount of replacement is often a matter of economic benefit. Cesium-doped catalysts are used for the production of styrene monomer from ethyl benzene at metal oxide contacts or from toluene and methanol as Cs-exchanged zeofltes ethylene oxide ammonoxidation, acrolein (methacrolein) acryflc acid (methacrylic acid) methyl methacrylate monomer methanol phthahc anhydride anthraquinone various olefins chlorinations in low pressure ammonia synthesis and in the conversion of SO2 to SO in sulfuric acid production. 

FIG. 22-21 Enhancement factor for solids with a variety of polar functionalities in CO9 at 35 C (from bottom to top hexamethylbenzene, 2-naphthol, phthalic anhydride, anthracene, acridine). 

Sodium acetate reacts with /p-nitrophenyl benzoates to give mixed anhydrides if the reaction is conducted in a polar aprotic solvent in the presence of a crown ether. The reaction is strongly accelerated by quartemary nitrogen groups substituted at the orthc position. Explain the basis for the enhanced reactivity of these compounds. 

Friedel-Crafts acylation involves electrophilic attack by acyl cation (CHsCO ) on the ring, and the ring s electronic character should indicate its susceptibility to attack. Compare electrostatic potential maps of ferrocene and acetylferrocene. Which molecule contains the most electron-rich ring Which acylation reaction should be faster Does an acetyl substituent enhance or diminish ring reactivity What should be the major product when ferrocene is combined with one equivalent of acetic anhydride ... 

For the ordinary Diels-Alder reaction the dienophile preferentially is of the electron-poor type electron-withdrawing substituents have a rate enhancing effect. Ethylene and simple alkenes are less reactive. Substituent Z in 2 can be e.g. CHO, COR, COOH, COOR, CN, Ar, NO2, halogen, C=C. Good dienophiles are for example maleic anhydride, acrolein, acrylonitrile, dehydrobenzene, tetracya-noethylene (TCNE), acetylene dicarboxylic esters. The diene preferentially is of the electron-rich type thus it should not bear an electron-withdrawing substituent. 

Els and McGill [48] reported the action of maleic anhydride on polypropylene-polyisoprene blends. A graft copolymer was found in situ through the modifier, which later enhanced the overall performance of the blend. Scott and Macosko [49] studied the reactive and nonreactive compatibilization of nylon-ethylene-propylene rubber blends. The nonreactive polyamide-ethylene propylene blends showed poor interfacial adhesion between the phases. The reactive polyamide-ethylene propylene-maleic anhydride modified blends showed excellent adhesion and much smaller dispersed phase domain size. 

Introduction of polar groups in the repeating unit The replacement of the carbonyl group in the benzophenone tetracarboxylic anhydride by a ben-zhydrol group strongly enhances the solubility in aprotic polar solvents.23,24... 

The combination of Lewis-acid catalysis and sc-COi has also been investigated. One of these studies involved the AlCls-catalyzed Diels Alder reaction of isoprene and maleic anhydride in sc-COi at 67 °C and at 74.5-78.5 bar [89]. The reaction rate was enhanced with respect to the uncatalyzed reaction and an unconcerted two-step mechanism was suggested [89]. 

The objective of recent DSM studies was to develop new EPM-based elastomers that have improved oil resistance. The idea was to develop such products by chemical modification of EPM copolymers using highly polar graft monomers, such as maleic anhydride (MA), and, optionally, by reacting these EPM-g-MA polymers with other chemicals as a way to (cross-Unk and) further enhance the polarity of the products. It is expected that the enhanced polarity will eventually lead to improved oil resistance of the final (cross-Unked) products, ft is noted that the EPM copolymers with extremely high MA graft levels as employed in this study are not commercially available. 

---