Emulsifying agents esters

Free naphthenic acids are corrosive and are mainly used as their salts and esters. The sodium salts are emulsifying agents for preparing agricultural insecticides, additives for cutting oils, and emulsion breakers in the oil industry. 

A strain of Acinetobacter calcoaceticus produces an unusual polysaccharide called emulsan. It is a complex polymer comprising about 15% fatty acyl esters and 20% protein. This structure enables it to act as an emulsifying agent, stabilising hydrocarbon/water emulsions at very low concentrations (0.1-1.0%). This property,... 

Salts of a-sulfo fatty acid esters can work as emulsifying agents for the preparation of asphalt emulsions and asphalt-latex emulsions. The ester sulfonates improve the storage stability of the emulsions [101,102]. In the manufacture of lightweight gypsum products air bubbles have to be mixed into the slurries. The use of salts of sulfonated C10 l8 fatty acid alkyl esters as foaming agents produces uniformly distributed fine bubbles [103]. Salts of C10 16 fatty acid alkyl ester sulfonates can also be added to cement mixtures to prevent slump loss of the mixtures [104]. 

Amine salts of acrylate ester polymers, which are physiologically acceptable and useful as surfactants, are prepared by transesterifying alkyl acrylate polymers with 4-morpholinethanol or alkanolamines and fatty alcohols or alkoxyl-ated alkylphenols and neutralizing with phosphoric acid. This polymer salt (pH of a 10% aqueous solution = 5.1) was used as an emulsifying agent for oils and waxes [70]. 

Alkyl phosphates, alkylphenyl phosphates, and polyethoxyalkyl phosphates are stated to be good emulsifying agents. Ethoxylated phosphate esters in particular are used as emulsifiers in many cases. 

The development of monoalkyl phosphate as a low skin irritating anionic surfactant is accented in a review with 30 references on monoalkyl phosphate salts, including surface-active properties, cutaneous effects, and applications to paste and liquid-type skin cleansers, and also phosphorylation reactions from the viewpoint of industrial production [26]. Amine salts of acrylate ester polymers, which are physiologically acceptable and useful as surfactants, are prepared by transesterification of alkyl acrylate polymers with 4-morpholinethanol or the alkanolamines and fatty alcohols or alkoxylated alkylphenols, and neutralizing with carboxylic or phosphoric acid. The polymer salt was used as an emulsifying agent for oils and waxes [70]. Preparation of pharmaceutical liposomes with surfactants derived from phosphoric acid is described in [279]. Lipid bilayer vesicles comprise an anionic or zwitterionic surfactant which when dispersed in H20 at a temperature above the phase transition temperature is in a micellar phase and a second lipid which is a single-chain fatty acid, fatty acid ester, or fatty alcohol which is in an emulsion phase, and cholesterol or a derivative. 

Finally brief reference should be made to the stabilization of synthetic latices, particularly high solids latices of the GR-S type and the improvement of the cold GR-S polymerization by a synthetic emulsifying agent known as EMCOL K-8300, which is a sulfosuccinic acid ester (sodium salt) of the isopropanolamide of oleic acid ... 

Another type of sulphated product, an ester sulphate, can be prepared by esterifying a fatty acid such as ricinoleic or oleic acid with a short-chain (C3-C5) alcohol and then sulphating. Such products are particularly useful foaming, wetting and emulsifying agents an example is sulphated butyl ricinoleate (9.11). 

Both acrylic acid and methacrylic acid polymerise to give water soluble hard resins. The viscous solutions so formed have been used as emulsifying agents, adhesives and as thickening agents for inks and dyes. Polymers of esters of these acids are of greater commercial importance. Esters can be prepared from cyanhydrins by reaction with an alcohol ... 

The phosphoric acid esters of diacyl glycerides, phospholipids, are important constituents of cellular membranes. Lecithins (phosphatidyl cholines) from egg white or soybeans are often added to foods as emulsifying agents or to modify flow characteristics and viscosity. Phospholipids have very low vapor pressures and decompose at elevated temperatures. The strategy for analysis involves preliminary isolation of the class, for example by TLC, followed by enzymatic hydrolysis, derivatization of the hydrolysis products, and then GC of the volatile derivatives. A number of phospholipases are known which are highly specific for particular positions on phospholipids. Phospholipase A2, usually isolated from snake venom, selectively hydrolyzes the 2-acyl ester linkage. The positions of attack for phospholipases A, C, and D are summarized on Figure 9.7 (24). Appropriate use of phospholipases followed by GC can thus be used to determine the composition of phospholipids. 

Emulsifying agents - [ALKANOLAMINES - ALKANOLAMINESFROMNITRO ALCOHOLS] (Vol2) -esters of lactate salts [HYDROXYCARBOXYLIC ACIDS] (Vol 13) -m floor polishes [POLISITES] (Vol 19)... 

Isosorbide mono-oleate (166i) can be used as a dispersant for carbon, titanium dioxide, and other pigments.259 2-Phosphates of fatty acid esters of isosorbide, as well as their appropriate sodium salts, are used as excellent dispersant and emulsifying agents.117... 

Quillaia bark or soapbark is derived from the tree Quillaja saponaria (Rosaceae) and other Quillaja species found in Chile, Peru, and Bolivia. The bark contains up to 10% saponins, a mixture known as commercial saponin , which is used for its detergent properties. Quillaia s surfactant properties are occasionally exploited in pharmaceutical preparations where it is used in the form of quillaia tincture as an emulsifying agent, particularly for fats, tars, and volatile oils. The bark contains a mixture of saponins which on hydrolysis liberates quillaic acid (Figure 5.62) as the aglycone, together with sugars, uronic acids, and acids from ester functions. 

Buffers can also be provided in parenteral formulations to ensure the required pH needed for solubility and/or stability considerations. Other excipients included in parenteral products are preservatives (e.g., benzyl alcohol, p-hydroxybenzoate esters, and phenol), antioxidants (e.g., ascorbic acid, sodium bisulfite, sodium metabisulfite, cysteine, and butyl hydroxy anisole), surfactants (e.g., polyoxyethylene sorbitan monooleate), and emulsifying agents (e.g., polysorbates). An inert gas (such as nitrogen) can also be used to enhance drug stability. Stability and solubility can also be enhanced by the addition of complexation and chelating agents such as the ethylenediaminetetraacetic acid salts. For a more detailed list of approved excipients in parenteral products, the reader should consult the monographs within the USP. 

Sorbitan esters of fatty acids Emulsifying agent, solubilizing agent, surfactant, stabilizer, suspending agent, vehicle iv... 

---