Elevated temperature materials

Non-soap greases using finely divided solids as thickeners are useful as lubricants at elevated temperatures. Materials used include organO Clays such as dimethyldioctyl-decyl-ammonium bentonite (Bentone greases) or selected dyestuffs which produce brightly coloured greases. [Pg.242]

Flammable Liquids, elevated temperature material, n.o.s. NA9276... [Pg.134]

Zenkovets GA, Kryukova GN, Gavrilov YY, Tsybulya SV, Anufrienko VA, Larina TA, Khabibulin DF, Lapina OB, Rodel E, Trunschke A, Ressler T, Schlogl R. The structural genesis of a complex (MoVW Om oxide during thermal treatments and its redox behavior at elevated temperatures. Materials Chemistry and Physics. 2007 103(2-3) 295-304. [Pg.309]

In addition to the Class 9 placard, a second placard may appear next to it with the word HOT. The word may also appear outside of a placard by itself. It indicates that the material inside has an elevated temperature that may be a hazard to anyone who comes in contact with it. An elevated-temperature material is usually a solid that has been heated to the point that it melts and becomes a molten liquid. The change is in physical state only the chemical characteristics of the material remain... [Pg.376]

This same hazard exists with all elevated-temperature materials. Responders should work carefully around transportation vehicles that have the HOT placard or the word HOT on the container. Miscellaneous hazardous materials can expose emergency responders to a wide variety of hazards. The placard itself does not indicate what those hazards may be. Do not treat this hazard class lightly, as there are some materials that can cause injury or death to responders if not handled properly. [Pg.382]

What is the word that elevated-temperature materials may have on a placard on a vehicle ... [Pg.384]

Hazardous material means a substance or material, which has been determined by the Secretary of Transportation to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce, and which has been so designated. The term includes hazardous substances, hazardous wastes, marine pollutants, and elevated temperature materials as defined in this section, materials designated as hazardous under the provisions of Sec. 172.101 of this subchapter, and materials that meet the defining criteria for hazard classes and divisions in part 173 of this subchapter. US 171.8... [Pg.57]

Elevated temperature materials present a number of hazards in transportation ... [Pg.65]

Liquid phase means a material that meets the definition of liquid when evaluated at the higher of the temperature at which it is offered for transportation or at which it is transported, not at the 37.8°C (100°F) temperature specified in ASTM D 4359-84. US 171.8 Elevated temperature material means a material which, when offered for transportation or transported in a bulk packaging (1) Is in a liquid phase and at a temperature at or above 100°C (212°F) (2) Is in a liquid phase with a flash point at or above 37.8°C (100 F) that is intentionally heated and offered for transportation or transported at or above its flash point or (3) Is in a solid phase and at a temperature at or above 240°C (464°F). US 171.8... [Pg.66]

Corrosive, see Corrosives and Class 8, p.47 Elevated temperature materials, see Elevated Temperature Materials, p.65... [Pg.96]

For the purposes of this subchapter, miscellaneous hazardous material (Class 9) means a material which presents a hazard during transportation but which does not meet the definition of any other hazard class. This class includes (a) Any material which has an anesthetic, noxious or other similar property which could cause extreme annoyance or discomfort to a flight crew member so as to prevent the correct performance of assigned duties or (b) Any material that meets the definition in Sec. 171.8 of this subchapter for an elevated temperature material, a hazardous substance, a hazardous waste, or a marine pollutant. US 173.140... [Pg.160]

Liquid means a material, other than an elevated temperature material, with a melting point or initial melting point of 20°C (68°F) or lower at a standard pressure of 101.3 kPa (14.7 psi). A viscous material for which a specific melting point cannot be determined must be subjected to the procedures specified in ASTM D 4359 Standard Test Method for Determining Whether a Material is Liquid or Solid . US 171.8... [Pg.241]

HOT Liquid materials which meet the definition of an elevated-temperature material... [Pg.524]

Further requirements for specific other hazards (e.g., marine pollutant, poisonous materials, elevated temperature materials)... [Pg.583]

JJ. Elevated Temperature Material (Meets definition in 49 CFR 171.8 for an elevated temperature material) KK. Infectious Waste (Meets definition in 49 CFR 171.8 for an infectious waste)... [Pg.46]

Any material that meets the definition for an elevated temperature material, a hazardous substance, a hazardous waste, or a marine pollutant... [Pg.147]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...