Elements metals and nonmetals

There are two basic types of elements metals and nonmetals. The metals, such as copper, gold, and iron (see Chapter 5), make up more than three-quarters of the total number of elements nonmetals, such as, for example, chlorine, sulfur and carbon, make up much of the rest. Other elements, however, known as the metalloids or semimetals, have properties intermediary between the metals and the nonmetals (see Appendix I). Only a few elements, such as the metals gold and copper and the nonmetal sulfur, which are known as the native elements, occur in nature uncombined. Most elements occur naturally combined with others, forming compounds. It is from these compounds, which occur in the crust of the earth as minerals, rocks, or sediments, that humans extract most of the elements that they require (Klein 2000). 

Interaction of Elemental Metals and Nonmetals with o-Quinones... 

Two classes of elements, metals and nonmetals, combine through... 

To date, eighty-one elements (metals and nonmetals), forty-five isotopes, and twenty-four ions have been identified in tobacco and tobacco smoke. As indicated in Table XX-4,146 have been identified in tobacco, 116 have been identified in tobacco smoke, and 112 are found in both tobacco and tobacco smoke. Table XX-5 provides a tabulation of the metallic and... 

In Section 2-6, we established two categories of elements, metals and nonmetals, and described some of their physical properties. Most metals are good conductors of heat and electricity, are malleable and ductile, and have moderate... 

Along the stairway (zig-zag line) in the periodic table are several elements that are difficult to classify exclusively as metals or nonmetals. They have properties between those of elements in the two classes. In particular, their electrical conductivities are intermediate between those of metals and nonmetals. The six elements... 

FIGURE B.12 The location ot the seven elements commonly regarded as metalloids these elements have characteristics of both metals and nonmetals. Other elements, notably beryllium and bismuth, are sometimes included in the classification. Boron (B), although not resembling a metal in appearance, is included because it resembles silicon (Si) chemically. 

Metals typically form basic oxides and nonmetals typically form acidic oxides, but what about the elements that lie on the diagonal frontier between the metals and nonmetals Along this frontier from beryllium to polonium, metallic character blends into nonmetallic character, and the oxides of these elements have both acidic and basic character (Fig. 10.7). Substances that react with both acids and bases are classified as amphoteric, from the Greek word for both. For example, aluminum oxide, A1203, is amphoteric. It reacts with acids ... 

Krebs, Robert E. The history and use of our earth s chemical elements a reference guide. Westport (CT) Greenwood P, 1998. ix, 346p. ISBN 0-313-30123-9 A short history of chemistry — Atomic structure The periodic table of the chemical elements — Alkali metals and alkali earth metals - Transition elements metals to nonmetals — Metallics and metalloids - Metalloids and nonmetals — Halogens and noble gases - Lanthanide series (rare-earth elements) — Actinide, transuranic, and transactinide series... 

Inorganic elements can be broadly classified as metals and nonmetals. Most metallic elements become toxic at some concentration. Nine elements (arsenic, barium, cadmium, chromium, lead, mercury, nickel, selenium, and thallium) and cyanide are defined as hazardous inorganics for the purposes of deep-well injection. 

The 92 chemical elements that occur naturally in the earth can be divided into two main groups metals and nonmetals. Although the distinction between the two is not always sharp and clear, it can be said that over 70 of the 92 elements are metals among the fewer than 22 remaining non-metals, six are known as metalloids, which have properties that fall between those of metals and nonmetals (see Appendix I). 

Williams JC Memphis State University, Memphis, TN Develop and improve quantitative methods for the determination of both metal and nonmetal elements in biological samples National Institute of General Medical Science... 

Most binary compounds (compounds of two elements) of metals and nonmetals arc essentially ionic. All compounds involving only nonmetals are essentially covalent except for compounds containing the NH4 ion. 

These studies show that radon can be classified as a metalloid element, together with boron, silicon, germanium, arsenic, antimony, tellurium, polonium, and astatine. Like these elements, radon lies on the diagonal of the Periodic Table between the true metals and nonmetals (Figure 5) and exhibits some of the characteristics of both (Stein, 1985). 

Atomic hydrogen is a powerful reducing agent, even at room temperature. For example, it reacts with the oxides and chlorides of many metals, including silver, copper, lead, bismuth, and mercury, to produce the free metals. It reduces some salts, such as nitrates, nitrites, and cyanides of sodium and potassium, to the metallic state. It reacts with a number of elements, both metals and nonmetals, to yield hydrides such as NH3, NaH, KH, and PH3. Sulfur forms a number of hydrides the simplest is H2S. Combining with oxygen, atomic... 

You should highlight or color the metalloid elements on the periodic table for practice to help you locate the metals and nonmetals. Left = Metals Right = Nonmetals. 

Elements bordering the stair-stepped line (B, Si, Ge, As, Sb, Te) are classified as metalloids. Metalloids have properties of both metals and nonmetals. Their unusual electrical properties make them valuable in the semiconductor and computer industry. 

Rhodium is a hard shiny-white metal that resists corrosion from oxygen, moisture, and acids at room temperatures. As a member of group 8 (VIII), Rh shares many chemical and physical properties with cobalt (j Co) just above it and iridium ( ylr) below it in the vertical group. Therefore, it is considered one of the elements that are transitory between metals and nonmetals. It is rare and only found in combination with platinum ores. 

Some of the metalloids are considered semiconductors. The term metalloids is used in this reference book because these elements do have characteristics of both metals and non-metals, and the term semiconductor refers only to particular elements somewhere between metals and nonmetals. Semiconductors also have properties of both metals and nonmetals. Therefore, they have the ability to act as conductors of electricity and thermal energy (heat), as well as the ability to act as insulators or nonconductors of electricity and heat, depending upon the kind and amount of impurities their crystals contain. Again, following the zigzag steps on the periodic table, the metalloids having properties of both metals and nonmetals are as follows boron, silicon, germanium, arsenic, antimony, tellurium, and polonium. 

The elements Si and Ge of group 14 act as semiconductors. A semiconductor is an element that can, to some extent, conduct electricity and heat, meaning it has the properties of both metal and nonmetals. The abihty of semiconductors to transmit variable electrical currents can be enhanced by controlling the type and amount of impurities. This is what makes them act as on-ofF circuits to control electrical impulses. This property is valuable in the electronics industry for the production of transistors, computer chips, integrated circuits, and so on. In other words, how well a semiconductor conducts electricity is not entirely dependent on the pure element itself, but also depends on the degree of its impurities and how they are controlled. 

Carbon-12 is the basis for the average atomic mass units (amu) that is used to determine the atomic weights of the elements. Carbon is one of the few elements that can form covalent bonds with itself as well as with many metals and nonmetals. 

Half-way elements share properties of both metals and nonmetals. Antimony, for example, has metallic and "nonmetallic forms. At higher temperatures they are better conductors than metals - a property that makes them important for the electronics industry. Silicon, the basis of the microchip, is the best known half-way element. 

Figure 6.6 summarizes different blocks, families, and areas of the periodic table. Most elements can be classified as metals. Metals are solid at room temperature, are good conductors of heat and electricity, and form positive ions. Moving across the table from left to right elements lose their metallic characteristics. The metalloids, also known as the semi-metals, have properties intermediate between metals and nonmetals. Because they display characteristics of both conductors and nonconductors, elements such as silicon and germanium find wide use in the semi-conductor industry. Non-metals are found on the far right of the periodic table. Nonmetals are poor conductors and are gases at room temperature. 

Metallic Solid type of solid characterized by delocalized electrons and metal atoms occupying lattice points Metalloid elements have properties intermediate between metals and nonmetals Mixture combination of two or more substances where the individual substances maintain their identity Moderator a material such as graphite or deuterium used to slow down neutrons in nuclear reactors... 

Ionic compounds consist of positive ions (cations) and negative ions (anions) hence, ionic compounds often consist of a metal and nonmetal. The electrostatic attraction between a cation and anion results in an ionic bond that results in compound formation. Binary ionic compounds form from two elements. Sodium chloride (NaCl) and sodium fluoride (NaF) are examples of binary ionic compounds. Three elements can form ternary ionic compounds. Ternary compounds result when polyatomic ions such as carbonate (C032 ), hydroxide (OH-), ammonium (NH4+), form compounds. For example, a calcium ion, Ca2+, combines with the carbonate ion to form the ternary ionic compound calcium carbonate, CaC03. Molecular compounds form discrete molecular units and often consist of a combination of two nonmetals. Compounds such as water (H20), carbon dioxide (C02), and nitric oxide (NO) represent simple binary molecular compounds. Ternary molecular compounds contain three elements. Glucose ( 12 ) is a ternary molecular compound. There are several distinct differences between ionic and molecular compounds, as summarized in Table 1.2. 

The most obvious correlation of the electronegativity scale with the general chemical properties of the elements bears on their division into metals and nonmetals. It is seen that the value x = 2 represents ap-... 

As Figure 6.8 shows, ionic compounds typically consist of elements found on opposite sides of the periodic table. Also, because of how the metals and nonmetals are organized in the periodic table, positive ions are generally derived from metallic elements and negative ions are generally derived from nonmetallic elements. 

---