Electron chain microscopy

Measurements of tan 6 and TSD current indicate that there are some characteristic interactions for the PP-PC blend with 90 wt.% PC and the increase of average dipole moment of polar groups is the highest in this case. Some chain orientation of PC macromolecules, induced by the presence of semi-crystalline PP component, can be one of the reasons of such an increase. This assumption, however, was not fully confirmed by x-ray measurements of crystallinity and by electron scanning microscopy of PP-PC blends... 

Monolayers of alkanetliiols adsorbed on gold, prepared by immersing tire substrate into solution, have been characterized by a large number of different surface analytical teclmiques. The lateral order in such layers has been investigated using electron [1431, helium [144, 1451 and x-ray [146, 1471 diffraction, as well as witli scanning probe microscopies [122, 1481. Infonnation about tire orientation of tire alkyl chains has been obtained by ellipsometry [149], infrared (IR) spectroscopy [150, 151] and NEXAFS [152]. 

The crystal stmcture of PPT is pseudo-orthorhombic (essentially monoclinic) with a = 0.785/nm b = 0.515/nm c (fiber axis) = 1.28/nm and d = 90°. The molecules are arranged in parallel hydrogen-bonded sheets. There are two chains in a unit cell and the theoretical crystal density is 1.48 g/cm. The observed fiber density is 1.45 g/cm. An interesting property of the dry jet-wet spun fibers is the lateral crystalline order. Based on electron microscopy studies of peeled sections of Kevlar-49, the supramolecular stmcture consists of radially oriented crystaUites. The fiber contains a pleated stmcture along the fiber axis, with a periodicity of 500—600 nm. 

Progress in deducing more structural details of these fibers has instead been achieved using NMR, electron microscopy and electron diffraction. These studies reveal that the fibers contain small microcrystals of ordered regions of the polypeptide chains interspersed in a matrix of less ordered or disordered regions of the chains (Eigure 14.9). The microcrystals comprise about 30% of the protein in the fibers, are arranged in p sheets, are 70 to 100 nanometers in size, and contain trace amounts of calcium ions. It is not yet established if the p sheets are planar or twisted as proposed for the amyloid fibril discussed in the previous section. 

Processes that occur at a size scale larger than the individual chain have been studied using microscopy, mainly transmission electron microscopy (TEM), but optical microscopy has been useful to examine craze shapes. The knowledge of the crazing process obtained by TEM has been ably summarised by Kramer and will not be repeated here [2,3]. At an interface between two polymers a craze often forms within one of the materials, typically the one with lower crazing stress. 

Usually, the molecular strands are coiled in the glassy polymer. They become stretched when a crack arrives and starts to build up the deformation zone. Presumably, strain softened polymer molecules from the bulk material are drawn into the deformation zone. This microscopic surface drawing mechanism may be considered to be analogous to that observed in lateral craze growth or in necking of thermoplastics. Chan, Donald and Kramer [87] observed by transmission electron microscopy how polymer chains were drawn into the fibrils at the craze-matrix-interface in PS films [92]. One explanation, the hypothesis of devitrification by Gent and Thomas [89] was set forth as early as 1972. 

The existence of the mesophase layer has been proved by infra-red spectroscopy, ESP, NMR, electron microscopy and other experimental methods. Moreover, it has been also proved that the thickness of this layer depends on the polymer cohesion energy, free surface energy of the solid, and on the flexibility of the polymer chains. 

Similar types of lamellar morphologies were observed for triblock copolymers of diphenylsiloxane and dimethylsiloxane having 40 wt% polydiphenylsiloxane, using electron microscopy, 47-148>. The lamellae thickness was approximately equal to the chain length of the rigid polydiphenylsiloxane blocks. These copolymers showed elastomeric properties comparable to those of conventional silica-reinforced, chemically crosslinked silicone rubbers. Tensile tests yielded an initial modulus of 0.5-1 MPa, tensile strength of 6-7 MPa and ultimate elongation between 400 and 800 %. 

Electron microscopy and X-ray diffraction experiments conducted on resilin-containing insect cuticle provided further support for resilin existing in the rubbery state as a crosslinked random network of protein chains. No fine structure was revealed by the electron microscopy experiments and zero crystallinity could be detected from the X-ray diffraction experiments. Furthermore, the diffraction... 

The dimer chains of Ca -ATPase can also be observed by freeze-fracture electron microscopy [119,165,166,172-174], forming regular arrays of oblique parallel ridges on the concave P fracture faces of the membrane, with complementary grooves or furrows on the convex E fracture faces. Resolution of the surface projections of individual Ca -ATPase molecules within the crystalline arrays has also been achieved on freeze-dried rotary shadowed preparations of vanadate treated rabbit sarcoplasmic reticulum [163,166,173,175]. The unit cell dimensions derived from these preparations are a = 6.5 nm b = 10.7 nm and 7 = 85.5° [175], in reasonable agreement with earlier estimates on negatively stained preparations [88]. 

In addition, data obtained from infrared, thermal, and fluorescence spectroscopic studies of the outermost layer of skin, stratum corneum (SC), and its components imply enhancer-improved permeation of solutes through the SC is associated with alterations involving the hydrocarbon chains of the SC lipid components. Data obtained from electron microscopy and x-ray diffraction reveals that the disordering of the lamellar packing is also an important mechanism for increased permeation of drugs induced by penetration enhancers (for a recent review, see Ref. 206). 

Phospholipids, which are one of the main structural components of the membrane, are present primarily as bilayers, as shown by molecular spectroscopy, electron microscopy and membrane transport studies (see Section 6.4.4). Phospholipid mobility in the membrane is limited. Rotational and vibrational motion is very rapid (the amplitude of the vibration of the alkyl chains increases with increasing distance from the polar head). Lateral diffusion is also fast (in the direction parallel to the membrane surface). In contrast, transport of the phospholipid from one side of the membrane to the other (flip-flop) is very slow. These properties are typical for the liquid-crystal type of membranes, characterized chiefly by ordering along a single coordinate. When decreasing the temperature (passing the transition or Kraft point, characteristic for various phospholipids), the liquid-crystalline bilayer is converted into the crystalline (gel) structure, where movement in the plane is impossible. 

---