Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Interface matrix

The interface matrix, K.. + j can be constructed by considering the two elemental process pictured in Figure 3.3. These are simply the reflection/refraction processes described in section 1.6, and it is known that... [Pg.49]

By using the interface matrix and the layer matrix of (6.1) and (6.5), the total system transfer matrix (scattering matrix) S, which relates the electric field on the ambient and substrate sides by... [Pg.254]

Gusev, A.I. (2000) Interfacing matrix-assisted laser desorption/ionization mass spectrometry with column and planar separations. Fresenius J. Anal. Chem. 366, 691-700. [Pg.376]

Flynn, G. Ho, N. Hwang, S. Owada, E. Molokhia, A. Behl, C. Higuchi, W. Yotsuyanagi, T. Shah, Y. Park, J. Interfacing matrix release and membrane absorption analysis of steroid absorption from a vaginal device in the rabbit doe. In Controlled Release of Polymeric... [Pg.1357]

The CVI SiC/SiC composites develop a network of matrix cracks under load. Density of matrix cracks is enhanced by rather strong interfaces the crack spacing distance may be as small as 10-20 p.m whereas the crack spacing distance is at least 10 times larger in the presence of rather weak interfaces. Matrix cracking is an alternative mechanism of energy dissipation. [Pg.72]

A decrease in radius of filler particles in the composite will result in an increased value of stresses needed to initiate the composite failure. Mechanisms of failure in a composite could take place in the polymer matrix by shear yielding and/or crazing, inside the aggregates of filler particles and/or at the interface matrix/filler by mechanism of dewetting. In particulate-filled composites, yielding and crazing do not depend on the work of adhesion between matrix and filler, VFmf, or thermal stresses, but these influence the dewetting phenomenon, considerably, (Eqn. 5) ... [Pg.188]

Evaluation of various solution concepts MIM also provides a procedure for investigating opportunities of integrating multiple functions into single modules by using the interface matrix. Herein, modules are first sorted in the expected assembly sequence. In this matrix is recorded which module are coupled by which kind of interface (so called hamburger or base part assembly ). The expected effects of the redesign can be estimated and an evaluation can be provided for each modular concept. [Pg.403]

Keywords Crystal growth Crystallization Biopolymer Synthetic polymer Interface Matrix Self-assembly... [Pg.80]

This methodology was chosen because by the time the CSA and ESAP have been implemented, the supply chain and project activities have advanced significantly further than the railway system level activities and, therefore, it was not practicable to develop the hierarchy of process models. Instead, allocation of responsibilities for development of safety arguments was implemented through the mapping of the VLUP System Architecture interfaces (SCID and O Idb interfaces) to the supplier s interfaces matrix. [Pg.214]

Transient and interface matrix effects noted when using Cs primary ions have been attributed, largely, to the strong reduction of the substrate work-function (van der Heide 2004 Gnaser 1999 Yu 1991). Correlations between the work-fnnction and secondary ion yields are discussed in the following section. [Pg.101]

Finite element caluculations were made for a (0/90)a CFRC composite and were compared with the results of a CFRP composite. The influences of a thin interface matrix layer upon the interlaminar stresses (t z and (Tyz were examined by modelling the interface layer using three different thicknesses ho-... [Pg.443]

There is no one best way to specify geometry. Usually, a Z-matrix is best for specifying symmetry constraints if properly constructed. Cartesian coordinate input is becoming more prevalent due to its ease of generation by graphical user interface programs. [Pg.71]

Jaguar comes with a graphic user interface, but it is not a molecule builder. The interface can be used to set the program options. The user must input the geometry by typing in Cartesian coordinates or a Z-matrix. The interface may... [Pg.337]

Babel (we tested Version 1.6) is a utility for converting computational chemistry input hies from one format to another. It is able to interconvert about 50 different hie formats, including conversions between SMILES, Cartesian coordinate, and Z-matrix input. The algorithm that generates a Z-matrix from Cartesian coordinates is fairly simplistic, so the Z-matrix will correctly represent the geometry, but will not include symmetry, dummy atoms, and the like. Babel can be run with command line options or in a menu-driven mode. There have been some third-party graphic interfaces created for Babel. [Pg.352]

Having considered the various parts of a dynamic-FAB system (atom gun, ionization, and matrix), it is now necessary to see how these are put together in a working inlet/ion source interface. [Pg.83]

The interface region in a composite is important in determining the ultimate properties of the composite. At the interface a discontinuity occurs in one or more material parameters such as elastic moduli, thermodynamic parameters such as chemical potential, and the coefficient of thermal expansion. The importance of the interface region in composites stems from two main reasons the interface occupies a large area in composites, and in general, the reinforcement and the matrix form a system that is not in thermodynamic equiUbhum. [Pg.198]

Fig. 10. A dark field (DF) transmission electron micrograph showing interface in a continuous fiber (F) a-Al202 (F)/Mg alloy (ZE41A) matrix (M) within... Fig. 10. A dark field (DF) transmission electron micrograph showing interface in a continuous fiber (F) a-Al202 (F)/Mg alloy (ZE41A) matrix (M) within...
A series of events can take place in response to the thermal stresses (/) plastic deformation of the ductile metal matrix (sHp, twinning, cavitation, grain boundary sliding, and/or migration) (2) cracking and failure of the brittle fiber (5) an adverse reaction at the interface and (4) failure of the fiber—matrix interface (17—20). [Pg.200]

When the void space in an agglomerate is completely filled with a Hquid (Fig. Ic), the capillary state of wetting is reached, and the tensile strength of the wet particle matrix arises from the pressure deficiency in the Hquid network owing to the concave Hquid interfaces at the agglomerate surface. This pressure deficiency can be calculated from the Laplace equation for chcular capillaries to yield, for Hquids which completely wet the particles ... [Pg.110]


See other pages where Interface matrix is mentioned: [Pg.253]    [Pg.68]    [Pg.313]    [Pg.435]    [Pg.264]    [Pg.428]    [Pg.253]    [Pg.68]    [Pg.313]    [Pg.435]    [Pg.264]    [Pg.428]    [Pg.746]    [Pg.756]    [Pg.1278]    [Pg.2382]    [Pg.2527]    [Pg.1008]    [Pg.163]    [Pg.232]    [Pg.122]    [Pg.128]    [Pg.167]    [Pg.328]    [Pg.114]    [Pg.201]    [Pg.546]    [Pg.548]    [Pg.197]    [Pg.198]    [Pg.198]    [Pg.234]    [Pg.421]    [Pg.402]    [Pg.545]    [Pg.163]    [Pg.321]   
See also in sourсe #XX -- [ Pg.253 , Pg.254 ]




SEARCH



Coating-matrix interface

Craze matrix fibril interface

Crystal-matrix interface

Domain-matrix interface

Fiber-Matrix Interface Debonding in Mode II Shear

Fiber-matrix interface

Fiber-matrix interface coatings

Fiber/matrix interface composites

Fibre-matrix interface

Interface aggregate-matrix

Interface droplet—matrix

Matrix elements, electrode-electrolyte interface

Matrix interface epoxy

Matrix isolation interface

Matrix-assisted laser desorption/ionization interfaces

Nanowires Interfaced with Electrodes as an Immobilization Matrix

Particle-matrix interface

Precipitate-matrix interface

Role of the Matrix and Interface

Whisker-matrix interface debonding

© 2024 chempedia.info