Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Radicals electron-adduct

In addition, the radiolysis of Ura in deoxygenated solutions (in the absence of N20) has also found attention (Infante et al. 1974 Shragge et al. 1974). Under such conditions, however, not only the OH-induced reactions play a role, but also the electron-adduct radical with all the ensuing mechanistic complications contributes to the products. [Pg.241]

The mechanism presented here is somewhat at variance with that proposed by the authors (Yamamoto et al. 1995) who suggested that the /BuOI I-derived radical adds to the primarily formed electron-adduct radical. Since this has been shown above to have only a very short lifetime, it will not be capable of undergoing bimolecular recombination reactions. An isomerization of C(8)-H -adduct [reaction (183)] followed by an addition of the tert-butanol-derived radical and water elimination [reactions (184) and (185)] is not in conflict with the above pulse radiolysis results [note that the tautomerization reaction (183) cannot be excluded on the basis of the pulse radiolysis data]. [Pg.266]

Although the fluorescence quenching by viologen electron acceptor measures the extent of the primary electron transfer from excited dye [reaction (1)], it cannot be used to determine the supersensitizing influence of an added third component that may act by a mechanism such as reaction (3) that does not influence the quenching reaction. It is thus necessary to measure A directly. This is relatively easy in solution but, because of the low concentrations involved, rather difficult in monolayers. However, the electron-adduct radical is relatively stable and in fact has been detected optically in a monolayer assembly (33,... [Pg.116]

Homolytic cleavage of dlazonlum salts to produce aryl radicals is induced by titan1um(III) salt, which is also effective in reducing the a-carbonylalkyl radical adduct to olefins, telotnerization of methyl vinyl ketone, and dimerization of the adduct radicals. The reaction can be used with other electron-deficient olefins, but telomerization or dimerization are important side reactions. [Pg.70]

An interesting example of the N(9)-C(8) prototropic tautomerism has been reported for the caffeine radical by pulse radiolysis studies in aqueous solution the transformation of the heteroatom-protonated electron adduct 25 into the carbon-protonated tautomer 26 occurred spontaneously in neutral media [95JCS(F)615]. [Pg.65]

The reaction of CARs with free radicals is much more complex and depends mostly on the nature of the free radical [RO ] rather than on the CAR. Certainly, at least four processes have been reported. Of course, in all four processes, the unpaired electron of the free radical is transferred to the CAR so that a new, carotenoid radical (or CAR adduct radical) is produced. ... [Pg.284]

This scheme can be extended by using mixtures of dienes with electron-deficient alkenes such as acrylonitrile. Due to its nucleophilic nature, addition of radical 68 to acrylonitrile is faster than addition to butadiene. The resulting ambiphilic adduct radical then adds to butadiene to form a relatively unreactive allyl radical. Oxidation and trapping of the allyl cation by methanol lead, as before, to products such as 72 and 73, which are composed of four components the radical precursor 67, acrylonitrile, butadiene and methanol (equation 30)17,94. [Pg.648]

Both ESI and APCI spectra can look relatively simple in most cases, just showing the pseudo-molecular ion MH or adduct ion in the positive mode, and deprotonation or adduct ions in the negative mode. With API techniques we are dealing with even-electron (non-radical) MH ions as opposed to odd-electron M species that result from electron ionisation. Once an ion has achieved an even-electron state, it is unlikely to revert to an odd-electron state, as this is energetically unfavourable. This means that fragmentations from MH should... [Pg.166]

Because the addition steps are generally fast and consequently exothermic chain steps, their transition states should occur early on the reaction coordinate and therefore resemble the starting alkene. This was recently confirmed by ab initio calculations for the attack at ethylene by methyl radicals and fluorene atoms. The relative stability of the adduct radicals therefore should have little influence on reacti-vity 2 ). The analysis of reactivity and regioselectivity for radical addition reactions, however, is even more complex, because polar effects seem to have an important influence. It has been known for some time that electronegative radicals X-prefer to react with ordinary alkenes while nucleophilic alkyl or acyl radicals rather attack electron deficient olefins e.g., cyano or carbonyl substituted olefins The best known example for this behavior is copolymerization This view was supported by different MO-calculation procedures and in particular by the successful FMO-treatment of the regioselectivity and relative reactivity of additions of radicals to a series of alkenes An excellent review of most of the more recent experimental data and their interpretation was published recently by Tedder and... [Pg.26]

Ionization of DNA s solvation shell produces water radical cations (H20 ) and fast electrons. The fate of the hole is dictated by two competing reactions hole transfer to DNA and formation of HO via proton transfer. If the ionized water is in direct contact with the DNA (F < 10), hole transfer dominates. If the ionized water is in the next layer out (9 < r < 22), HO formation dominates [67,89,90]. The thermalized excess electrons attach preferentially to bases, regardless of their origin. Thus the yield of one-electron reduced bases per DNA mass increases in lockstep with increasing F, up to an F of 20-25. This means that when F exceeds 9, there will be an imbalance between holes and electrons trapped on DNA, the balance of the holes being trapped as HO . At F = 17, an example where the water and DNA masses are about equal, the solvation shell doubles the number of electron adducts, increasing the DNA-centered holes by a bit over 50% [91-93]. [Pg.448]

In order to investigate hole and electron transfer we have employed a number of techniques to produce holes and electron adducts within DNA [7]. These trapped ion radical species of DNA are produced by y- or UV-irradia-tion at 77 K of DNA in various aqueous matrices. Each technique employed produces specific radical species. [Pg.111]

Some other interesting observations regarding free radicals in these systems are noteworthy. In many instances, multiple conformations of radicals are found at lower but not higher temperatures. This indicates that the radicals exist in shallow energy wells at low temperature this phenomenon was observed very early, in the 4 K ENDOR investigation of radical formation in amino acids.23 Unlike the process in DNA. In which it is well understood that the thymine anion radical protonates at C6 to form T(C6)H-, in the crystalline state there is a not clear link between pyrimidine electron adducts and H-addition radicals. We finally note that a deuterium isotope effect of protonation/deprotonation processes was found in cytosine.HCl and 2 -deoxycytidine.HCl, as evidenced by a lower propensity for these processes to occur in partially deuterated systems than in predated ones. [Pg.251]

Cleavage of the Co-C in bond in 45 leads to the glycosyl radical 11 which is trapped by the electron-poor alkene 12. Reduction of the adduct radical 13, followed by protonation,... [Pg.514]

The Meerwein arylation is at least formally related to the atom transfer method because a net introduction of an aromatic ring and a chlorine across a double bond is accomplished (Scheme 62). Facile elimination of HC1 provides an efficient route to the kinds of substituted styrenes that are frequently prepared by Heck arylations. Standard protocol calls for the generation of an arene diazonium chloride in situ, followed by addition of an alkene (often electron deficient because aryl radicals are nucleophilic) and a catalytic quantity of copper(II) chloride. It is usually suggested that the copper salt operates in a catalytic redox cycle, reducing the diazonium salt to the aryl radical as Cu1 and trapping the adduct radical as Cu11. [Pg.757]

In redox methods, radicals are generated and removed either by chemical or electrochemical oxidation or reduction. Initial and final radicals are often differentiated by their ability to be oxidized or reduced, as determined by substituents. In oxidative methods, radicals are removed by conversion to cations. Such oxidations are naturally suited for the additions of electrophilic radicals to alkenes (to give adduct radicals that are more susceptible to oxidation than initial radicals). Reductive methods are suited for the reverse addition of alkyl radicals to electron poor alkenes to give adducts that are more easily reduced to anions (or organometallics). [Pg.762]

Oxidation of enolizable nitro, carbonyl and dicarbonyl compounds with Fem MnnI and Celv reagents in the presence of electron rich aromatic (or heteroaromatic) rings often provides modest to good yields of substituted products. Typical examples are shown in Scheme 81.233 234 The oxidant functions both to generate the initial radical (Scheme 71) and to trap the adduct radical. Products of ortho substitution usually predominate but significant amounts of para and meta products are often formed, and in some cases, reversibility in the addition step may influence the product distribution. A recent paper by Citterio and Santi provides a nice introduction to these types of reactions.219... [Pg.767]

The rate of fluorine displacement from fluorotoluenes by H-atoms has been measured in single-pulse shock tubes at 988-114 K.158 The addition of CF3 to CgFsCl has been studied.159 The intermediate adduct radical (CF3C6F5C1) was shown to react with an additional CF3 to give CF3CI and C6F5CF3. A range of fluorinated biphenyls can be produced by the reaction of pentafluorobenzene radicals with both electron-rich and -poor aromatics. The isomeric ratios of biphenyls produced indicated an efficient homolytic chain process.160... [Pg.121]

Hydroxyl radicals react with many halide (pseudohalide) ions at close to diffusion-controlled rates thereby forming a three-electron-bonded adduct radical [e.g., reaction (1) k = 1.1 x 1010 dm3 mol-1 s 1 Zehavi and Rabani 1972], These adducts may decompose into OH" and the halide (pseudohalide) radical which then complexes with another halide (pseudohalide) ion yielding the dihalogen radical anion [reactions (2) and (3) k2 = 4.2 x 106 s"1 k3 1010 dm3 mol"1 s"1 for resonance Raman spectra of such intermediates, see Tripathi et al. 1985]. [Pg.89]

Radical cations are strongly oxidizing intermediates, but also after deprotonation at a heteroatom (in the present systems at nitrogen) some of this oxidizing property remains. Thus a common feature of these intermediates is that they are readily reduced by good electron donors. Since the heteroatom-centered radicals and the radical cations are always in equilibrium, it is, at least in principle, possible that such intermediates react with water at another site (canonical mesomelic form), that is at carbon. This reaction leads to OH-adduct radicals. Although deprotonation at a heteroatom is usually faster (but also reversible) than deprotonation at carbon, the latter reaction is typically "irreversible". This also holds for a deprotonation at methyl (in Thy). [Pg.222]


See other pages where Radicals electron-adduct is mentioned: [Pg.133]    [Pg.133]    [Pg.142]    [Pg.29]    [Pg.960]    [Pg.23]    [Pg.187]    [Pg.644]    [Pg.649]    [Pg.146]    [Pg.181]    [Pg.504]    [Pg.105]    [Pg.111]    [Pg.111]    [Pg.112]    [Pg.123]    [Pg.262]    [Pg.262]    [Pg.142]    [Pg.736]    [Pg.752]    [Pg.753]    [Pg.760]    [Pg.761]    [Pg.764]    [Pg.118]    [Pg.118]    [Pg.94]    [Pg.114]   
See also in sourсe #XX -- [ Pg.116 , Pg.118 ]




SEARCH



Electron radicals

Radical adduct

© 2024 chempedia.info