Electric work

Work and heat 2.7 The concept of work 2.8 Mechanical work 2.8 Volume work 2.9 Surface work 2.10 Electrical work 2.10 

Heat capacity of a system 2.12 Specihc heat capacity 2.12 Heating of a system of substances 2.13 Symbols and units 2.13 

---

The electrostatic potential within a phase, that is, l/e times the electrical work of bringing unit charge from vacuum at infinity into the phase, is called the Galvani, or inner, potential Similarly, the electrostatic potential difference... 

We now consider briefly the matter of electrode potentials. The familiar Nemst equation was at one time treated in terms of the solution pressure of the metal in the electrode, but it is better to consider directly the net chemical change accompanying the flow of 1 faraday (7 ), and to equate the electrical work to the free energy change. Thus, for the cell... 

A special example of electrical work occurs when work is done on an electrochemical cell or by such a cell on the surroundings -w in the convention of this article). Themiodynamics applies to such a cell when it is at equilibrium with its surroundings, i.e. when the electrical potential (electromotive force emi) of the cell is... 

Path III (a) Do electrical work on the system, holding the pressure constant at 1.000 atm, until the volume /has increased to 34.33 I under these circumstances, the system also does expansion work against the external pressure. 

In this and nearly all subsequent sections, the work V>w will be restricted to pressure-volume work, -p dF, and the fact that the heat Dq may in some cases be electrical work will be ignored. 

It suffices to carry out one such experiment, such as the expansion or compression of a gas, to establish that there are states inaccessible by adiabatic reversible paths, indeed even by any adiabatic irreversible path. For example, if one takes one mole of N2 gas in a volume of 24 litres at a pressure of 1.00 atm (i.e. at 25 °C), there is no combination of adiabatic reversible paths that can bring the system to a final state with the same volume and a different temperature. A higher temperature (on the ideal-gas scale Oj ) can be reached by an adiabatic irreversible path, e.g. by doing electrical work on the system, but a state with the same volume and a lower temperature Oj is inaccessible by any adiabatic path. 

Jptt Kokai Tokkyo Koho 74 55,733 (1974), T. Nakenishi (to Matsushita Electric Works Ltd). 

Jptt Kokai Tokkyo Koho 82 16,018 (fan. 27, 1982) (to Matsushita Electric Works, Ltd.). 

Yokagawa Electric Works has developed a thermometer based on the nuclear quadmpole resonance of potassium chlorate, usable over the range from —184 to 125°C. This thermometer makes use of the fundamental properties of the absorption frequency of the Cl nucleus, and its caUbration is itself a constant of nature. 

Jptt Kokai Tokkyo Koho 81 88,843 (July 18,1981), (to Matusushita Electric Works). 

At the end of each month, the field cost engineer collects all current information on a detailed cost report form. As these are actual costs, they can be used to estimate future job costs to completion. Daily reports of unit-cost progress for concrete, excavation, masonry, steel, piping, and electrical work, etc., are then used to predict possible overruns or underruns for the various items. Analysis and comparison with the original estimate point out trouble spots for early attention. If an item is running into difficulty, it is red-flagged to the resident and projec t engineers for remedial action. 

Electrical work - certain classifications Equipment removal, e.g. to workshop Work on roof/at heights... 

The term "cogeneration is sometimes used to describe a combined power plant, but it is better used for a combined heat and power (CHP) plant such as the one shown in Fig. 1.6 (see Ref. [2] for a detailed discussion on CHP plants). Now the fuel energy is converted partly into (electrical) work (W) and partly into useful heat (Qu) at a low temperature, but higher than ambient. The non-useful heat rejected is (2nu-... 

Work interchange between a system and its surroundings can take on any of a variety of forms including mechanical shaft work, electrical work, magnetic work, surface tension, etc. For many applications, the only work involved is that of compression or expansion against the surroundings, in which case the work term in Equation 2-102 becomes... 

A qualihed bid can make the offer void, and most organizations would disqualify a bid which was qualihed. An example of a qualihed bid would be where the specihca-tion says that electrical attendance is part of the contract, whereas the bidder says in his bid documents or in an accompanying letter that he has not included for electrical work, and is not prepared to carry it out. A common qualihcation is where a contractor puts forward a manufacturer of plant different to that specihed. The plant may be just as good, but the bid is nonetheless qualihed, and would give an unfair advantage to the bidder. 

Electricity works (excluding compression-ignition engines burning distillate fuel with a sulfur content of <1 per cent) ... 

Acetylene works Acrylates works Aldehyde works Aluminum works Amines works Ammonia works Anhydride works Arsenic works Asbestos works Benzene works Beryllium works Bisulfate works Bromine works Cadmium works Carbon disulfide works Carbonyl works Caustic soda works Cement works Ceramic works Chemical fertilizer works Chlorine works Chromium works Copper works Di-isocyanate works Electricity works Fiber works Fluorine works Gas liquor works Gas and coke works Hydrochloric acid works Hydrofluoric acid works Hydrogen cyanide works Incineration works Iron works and steel works... 

Finally, the energy available from the above reaction might be used to operate a fuel cell such as those involved in the space program. In that case, as much as 818 kj/mol of useful electrical work could be obtained relatively litde heat is evolved. Summarizing this discussion in terms of an energy balance (per mole of methane reacting) ... 

As noted earlier, for a reaction at constant pressure, such as that taking place in an open coffee-cup calorimeter, the heat flow is equal to the change in enthalpy. If a reaction is carried out at constant volume (as is the case in a sealed bomb calorimeter) and there is no mechanical or electrical work involved, no work is done. Under these conditions, with w = 0, the heat flow is equal to the change in energy, AE. Hence we have... 

In principle at least, any spontaneous redox reaction can serve as a source of energy in a voltaic cell. The cell must be designed in such a way that oxidation occurs at one electrode (anode) with reduction at the other electrode (cathode). The electrons produced at the anode must be transferred to the cathode, where they are consumed. To do this, the electrons move through an external circuit, where they do electrical work. 

Radium-226 decays by alpha emission to radon-222. Suppose that 25.0% of the energy given offby one gram of radium is converted to electrical energy. What is the minimum mass of lithium that would be needed for the voltaic cell Li Li+1 Cu2+ Cu, at standard conditions, to produce the same amount of electrical work (AG°) ... 

Work (w) Any form of energy except heat exchanged between system and surroundings includes expansion work and electrical work, 214... 

Figure 7-5 shows an apparatus in which an electric current can be passed through water. As remarked in Section 3-1.2, the electric current causes a decomposition of water. As work is done (electrical work), hydrogen gas and oxygen gas are produced. Measurements of the electric current and voltage show that 68.3 kcal of electrical work, W, must be done to decompose one mole of water. The equation for the reaction is... 

So the voltage of an electrochemical cell measures its capacity for doing electrical work. Different cells show different voltages. To see the importance of this voltage, consider the experiment shown in Figure 12-6. In Figure 12-6A we have a cell based upon reaction (27) ... 

Equation (3.1) does not take into account the electric work because equivalent ion exchange is considered. Therefore... 

Now if the chemical reaction had been allowed to proceed without the performance of any external electrical work, say in a calorimeter, so that the initial and final temperatures of the system are both T, the change of intrinsic energy would have been the same as that occurring in the process described above, as we know from the First Law. Thus the heat of reaction, Q will be equal to the increase of intrinsic energy ... 

---