Display conditions

The stabihty of a particular treatment is also important. The enhancement should survive during normal wear or display conditions. Whereas all the enhancements from heat treatments are stable, some produced by irradiation are not. There are also surface coatings which wear off, oilings which dry out, etc. 

O.F. van den Brink, J.J. Boon, P.B. O Connor, M.C. Duursma, and R.M.A. Heeren, Matrix assisted laser desorption/ionization Fourier transform mass spectrometric analysis of oxyge nated triglycerides and phosphatidylcholines in egg tempera paint dosimeters used for environ mental monitoring of museum display conditions, J. Mass Spectrom., 36, 479 492 (2001). 

If the museum curator wanted to display the bottle and its contents, would you have enough information to make a recommendation on display conditions ... 

The third category of metallic artifacts includes collections of a most different provenance—such as scientific instruments, fine arts, historic pieces, ethnographic specimens, etc., which are usually kept in museums. Contrary to the belief that an object is safe once it enters a museum, certain storage or display conditions may lead to corrosive reactions that are different from those found in the natural environment [264, 265]. Some of these dangers come from off-gassing from materials used to build display cases and rooms, as well as air pollution introduced by visitors. 

The stability of a particular treatment is also important. The enhancement should survive during normal wear or display conditions. 

Derrick, M., Daniel, V. and Parker, A. (1994). Evaluation of storage and display conditions for cellulose nitrate objects. In Preprints of the contributions to the IIC Ottawa Congress Preventive Conservation Practices, Theory and Research Ottawa, 12-16 September 1994 (A. Roy and P. Smith, eds), pp. 207-211, IIC. 

Chiantore, O., D. Scalarone, A. Rava, M. Fihppi, A. Pellegrino, and A. Pesenti-Compagnoni, Analysis of materials, restoration practice, design and control of display conditions at the National Cinema Museum in Toronto, in ICOM Committee for Conservation, 13th Triennial Meeting, Rio de Janeiro, September 22-27, 2002, pp. 903-910. 

Visual determinations are made by comparing the chromatogram with the reference chromatograms. Set the data display conditions so that a 0.1 ug/mL standard is full scale on the chromatogram. 

False indication A display where logical difference exists between actual and displayed conditions (AMC to CS25.1309). 

The basic condition of the Standard application - the availability of stable coupled probabilistic or the multiple probabilistic relations between then controlled quality indexes and magnetic characteristics of steel. All the probabilistic estimates, used in the Standard, are applied at confidence level not less than 0,95. General requirements to the means of control and procedure of its performance are also stipulated. Engineers of standard development endeavoured take into consideration the existed practice of technical control performance and test at the enterprises that is why the preparation of object control for the performance of nondestructive test can be done during the process of ordinary acceptance test. It is suggested that every enterprise is operated in correspondence with direct and non-destructive tests, obtained exactly at it, for detailed process chart and definite product type, however the tests have long since been performed after development of the Standard displayed that process gives way to unification. 

If improvements should be achieved by an automation of the inspection process this requires a control of the process parameters of the whole equipment by an integrated "intelligent" system and not by displays still being controlled by the human inspector. This integrated control-system ensures that the inspection conditions are at the highest reproduction level. 

We have found that display of nuclear trajectories and the simultaneous evolution of charge distributions to yield insightful details of complicated processes. Such descriptions also map more readily to the actual experimental conditions than do the more conventional time-independent scattering matrix descriptions. 

In applying minimal END to processes such as these, one finds that different initial conditions lead to different product channels. In Figure 1, we show a somewhat truncated time lapse picture of a typical trajectory that leads to abstraction. In this rendering, one of the hydrogens of NHaD" " is hidden. As an example of properties whose evolution can be depicted we display interatomic distances and atomic electronic charges. Obviously, one can similarly study the time dependence of various other properties during the reactive encounter. 

The evolution of a wavepacket representing the H -b H2 scattering reaction for a particular set of inifial conditions is plotted on Figure 2 as a series of snapshots. To display the three-dimensional (3D) wavepacket on a two-dimensional (2D) plot, the reduced density... 

The program is used by first building the target molecule. It then generates a list of possible precursors. The user can choose which precursor to use and then obtain a list of precursors to it. The reaction name and conditions can also be displayed. Once a satisfactory synthesis route is found, it can be printed without all the other possible precursors included. The drawing mode worked well and the documentation was well written. 

In the book, two- and three-dimensional bodies, plates and shells with cracks are considered. Properties of solutions are established existence of solutions, regularity up to the crack faces, convergence of solutions as parameters of a system are varying and so on. We analyse different constitutive laws elastic, thermoelastic, elastoplastic. The book gives a new outlook on the crack problem, displays new methods of studying the problems and proposes new models for cracks in elastic and nonelastic bodies satisfying physically suitable nonpenetration conditions between crack faces. 

Modified ETEE is less dense, tougher, and stiffer and exhibits a higher tensile strength and creep resistance than PTEE, PEA, or EEP resins. It is ductile, and displays in various compositions the characteristic of a nonlinear stress—strain relationship. Typical physical properties of Tef2el products are shown in Table 1 (24,25). Properties such as elongation and flex life depend on crystallinity, which is affected by the rate of crysta11i2ation values depend on fabrication conditions and melt cooling rates. 

---