Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diels-Alder dienes Furan

As the last reaction of equation 99 suggests, trifluoromethyl substituted furans are themselves reactive Diels-Alder dienes [722] (equation 102)... [Pg.832]

Keywords alkadienes, intramol Diels-Alder reaction, furan dienes, epoxydecalin systems... [Pg.304]

However, when the diene system is constrained to the s-cis conformation by a cyclic framework, the effective concentration of the s-cis diene is much higher than for acyclic dienes, which have the s-cis conformer as a minor component of the rotomeric equilibrium. Such conformationally constrained dienes react much more easily and are excellent Diels-Alder dienes. Examples are cyclopentadi-enes, 1,3-cyclohexadienes, and furans. [Pg.316]

In addition to being a very reactive Diels-Alder diene, l,3,4,5,6,7-hexaphenylbenzo[f]furan was reported to be highly fluorescent in toluene solution, as well as in its solid state. This benzo[f]furan may therefore be used as electron transport material in an organic light-emitting diode <2002SM247>. [Pg.455]

For instance, 2,5-bis(trimethylsilyloxy)furans 175, which are synthetic equivalents of the diketene 177, are reactive Diels-Alder dienes undergoing cycloaddition reaction with dienophiles to give, after hydrolytic workup, p-hydroquinones 176 in high yield (equation 128) ". ... [Pg.449]

Free radical intermediates in intramolecular Diels-Alder 1 furans, as dienes 3, 13, 15, 36, 56... [Pg.96]

Wenkert, E., Moeller, P.D., Piettre, S.R. (1988). Five-membered aromatic heterocycles as dienophiles in Diels-Alder reactions. Furan, pyrrole and indole Journal of the American Chemical Society, 110, 21, 7188-7194, ISSN 0002-7863 Wenkert, E., Piettre, S.R. (1988). Reaction of a-and 3-acylated furans with conjugated dienes. Journal of Organic Chemistry, 53,5850-5853, ISSN 0022-3263 Wilkes, J.S. (2002). A short history of ionic liquids - From molten salts to neoteric solvents. Green Chemistry, 4, 73-80, ISSN 1463-9270... [Pg.344]

The balance between aromatic and aUphatic reactivity is affected by the type of substituents on the ring. Furan functions as a diene in the Diels-Alder reaction. With maleic anhydride, furan readily forms 7-oxabicyclo [2.2.1]hept-5-ene-2,3-dicarboxyhc anhydride in excellent yield [5426-09-5] (4). [Pg.74]

Benzo[Z)]furans and indoles do not take part in Diels-Alder reactions but 2-vinyl-benzo[Z)]furan and 2- and 3-vinylindoles give adducts involving the exocyclic double bond. In contrast, the benzo[c]-fused heterocycles function as highly reactive dienes in [4 + 2] cycloaddition reactions. Thus benzo[c]furan, isoindole (benzo[c]pyrrole) and benzo[c]thiophene all yield Diels-Alder adducts (137) with maleic anhydride. Adducts of this type are used to characterize these unstable molecules and in a similar way benzo[c]selenophene, which polymerizes on attempted isolation, was characterized by formation of an adduct with tetracyanoethylene (76JA867). [Pg.67]

When benzyne is generated in the presence of potential dienes, additions at the highly strained triple bond occur. Among the types of compounds that give Diels-Alder addition products are furans, cyclopentadienones, and anthracene. [Pg.596]

Knunyants showed that such perfluoroalkenes, under forcing conditions, undergo Diels-Alder reactions with cyclic dienes such as cyclohexadiene [72] (equation 65) or furan [7J] (equation 66). [Pg.819]

Soon after the discovery of the addition reaction between diene-ophiles and dienes which now bears their names, Diels and Alder extended their investigations to include potential heterocyclic dienes. In 1929 the first compound investigated, furan, was observed to combine with maleic anhydride, like butadiene in a typical Diels-Alder reaction, across the 2,5-positions yielding a 1 1 molar adduct... [Pg.125]

Although furan is usually a poor diene in the Diels-Alder reaction, the chiral copper reagent 24b promotes its asymmetric addition to acryloyloxazolidinone to afford the 7-oxabicyclo[2.2.1]hept-2-ene derivative in high optical purity (Scheme 1.40). Because a retro-Diels-Alder reaction occurs above -20 °C, the reaction must be performed at low temperature (-78 °C) to obtain a high optical yield. The bicy-... [Pg.29]

Further mechanistic evidence comes from trapping experiments. When bromobenzene is treated with KNH2 in the presence of a diene such as furan, a Diels-Alder reaction (Section 14.5) occurs, implying that the symmetrical intermediate is a benzyne, formed by elimination of HBr from bromobenzene. Ben-zyne is too reactive to be isolated as a pure compound but, in the presence of water, addition occurs to give the phenol, in the presence of a diene, Diels-Alder cycloaddition takes place. [Pg.575]

The heteroaryne 1 is trapped as the Diels-Alder adduct when 6-bromo-l,3/4, 5,2,4-trilhia-diazepine is treated with various dienes in the presence of N./V-diisopropylethylamine or sodium methoxide, e.g. trapping of 1 with furan to give 2.391... [Pg.484]

The reactivity of heterocyclic dienes is determined by the nature and number of heteroatoms and, in the case of heteroaromatic compounds, also by the aromatic character. Furans undergo Diels-Alder reactions with strong dienophiles and generally afford cxo-cycloadducts which are thermodynamically more stable than the kinetically favoured c z/o-adducts. [Pg.40]

Good yields and high diastereoselectivities were obtained by using zeolites in combination with Lewis-acid catalyst [21]. Table 4.7 illustrates some examples of Diels-Alder reactions of cyclopentadiene, cyclohexadiene and furan with methyl acrylate. Na-Y and Ce-Y zeolites gave excellent results for the cycloadditions of carbocyclic dienes, and combining these zeolites with anhydrous ZnBr2 further enhanced the endo diastereoselectivity of the reaction. An exception is the cycloaddition of furan that occurred considerably faster and with better yield, in comparison with the classic procedure [22], when performed in the presence of sole zeolites. [Pg.148]

The primary interaction of singlet oxygen, produced by energy transfer from the excited sensitizer, with the diene can give rise to an exciplet that then collapses to peroxide, to a 1,4-biradical or to a 1,4-zwitterion alternatively, the adduct is the result of a concerted action without the involvement of an intermediate. Detailed kinetic Diels-Alder investigations of singlet oxygen and furans indicate that the reactions proceed concertedly but are asynchronous with the involvement of an exciplex as the primary reaction intermediate [63]. [Pg.169]

Intramolecular Diels-Alder reactions employing furan as the diene component are an effective step in the synthesis of many natural products, but difficulties are sometimes encountered due to the poor dienic character of the aromatic ring. Using CDs can help to overcome this problem. Thus, when 73 is heated in water at 89 °C for only 6h a 20% epimeric 1 2 mixture of 74 and 75 is... [Pg.170]

Intramolecular Diels-Alder reactions of the furan diene (IMDAF) rapid construction of highly functionalized isoquinoline skeletons [65i]... [Pg.197]

Cycloaddition of 125 with buckminsterfullerene (Ceo) at 3 kbar allowed the adduct [48] to be obtained, preventing a retro Diels-Alder process (Scheme 5.19). Cycloadditions of tropone (125) with furans 134 gave mixtures of 1 1 endo-dcad exo-monocycloadducts 135 and 136, respectively [49a], together with some bisadducts. In this case furan reacts solely as the 27t component in spite of its diene system. Whereas 2-methoxy furan gave mainly the kinetically controlled product 135 (R= OMe Ri =R2 =H), under the same conditions 3,4-dimethoxy furan afforded the thermodynamically controlled cycloadduct 136 (R=H Ri =R2 =OMe) as the major product (Scheme 5.19). [Pg.228]

Diels-Alder reaction of the furan derivative 148 with homochiral bicyclic enone 149 is the key step [56] in the total synthesis of the diterpenes jatropho-lone A and B, 151 and 152, respectively, isolated from Jatropha gossypiifolia L [57], Initial efforts to carry out the cycloaddition between 148 and 149 under thermal or Lewis-acid conditions failed due to diene instability. Application of 5kbar of pressure to a neat 1 1 mixture of diene and dienophile afforded crystalline 150 with the desired regiochemistry (Scheme 5.23). Subsequent aromatization, introduction of the methylene group, oxidation and methylation afforded (-l-)-jatropholones 151 and 152. [Pg.232]

The reaction of furan with 2,5-dihydrothiophene-3,4-dicarboxylic anhydride is remarkable (Scheme 6.19). Furan is a poor diene and requires high pressure to affect cycloadditions [39]. On the other hand, high temperatures are forbidden because cycloaddition products derived from furan undergo cycloreversion under these conditions. In 5.0m LP-DE, the Diels-Alder reaction of furan with 2,5-dihydrothiophene-3,4-dicarboxylic anhydride proceeds at room temperature and atmospheric pressure in 9.5 h with 70 % yield and with the same diastereos-electivity found when the reaction is carried out under high pressure [40]. [Pg.269]

Keay B. A., Hunt 1. R. Aspects of the Intramolecular Diels-Alder Reaction of Furan Dienes Leading to the Formation of Epoxydecalin Systems Adv. Cycloaddit. 1999 6 173-210... [Pg.304]

Azadienes undergo Diels-Alder reactions to form pyridine, dihydro- and tetrahydropyridine derivatives. N-Vinyl lactim ethers undergo Diels-Alder reactions with a limited set of dienophiles. " Thioketones react with dienes to give Diels-Alder cycloadducts. The carbonyl group of lactams have also been shown to be a dienophile. Certain heterocyclic aromatic rings (among them furans) can also behave as dienes in the Diels-Alder reaction. Some hetero dienes that give the reaction are -C=C-C=0, 0=C-C=0, and N=C-C=N. ... [Pg.1075]

Examples Compound <35) is a double diene, capable of Diels-Alder reactions on the simple diene and on the furan ring and it was required to try out a route to polycyclic compounds using both these reactions, Wittig disconnection direct to available aldehyde (36) and easily made (37) is possible, but the alternative Wittig disconnection to (38) takes advantage of the known simple and high yielding condensation of acetone with (36). [Pg.220]

In the same area, a (5)-tryptophan-derived oxazaborolidine including a p-tolylsulfonylamide function has been used by Corey et al. to catalyse the enantioselective Diels-Alder reaction between 2-bromoacrolein and cyclo-pentadiene to form the corresponding chiral product with an unprecedented high (> 99% ee) enantioselectivity (Scheme 5.27)." This highly efficient methodology was extended to various 2-substituted acroleins and dienes such as isoprene and furan. In addition, it was applied to develop a highly efficient total synthesis of the potent antiulcer substance, cassiol, as depicted in Scheme 5.21... [Pg.204]

It has been known that aromatic heterocycles such as furan, thiophene, and pyrrole undergo Diels-Alder reactions despite their aromaticity and hence expected inertness. Furans have been especially used efficiently as dienes due to their electron-rich properties. Thiophenes and pyrroles are less reactive as dienes than furans. But pyrroles with A-elecIron-withdrawing substituents are efficient dienes. There exists a limited number of examples of five-membered, aromatic heterocycles acting as dienophiles in Diels-Alder reactions. Some nitro heteroaromatics serve as dienophiles in the Diels-Alder reactions. Heating a mixture of l-(phenylsulfonyl)-3-nitropyrrole and isoprene at 175 °C followed by oxidation results in the formation of indoles (see Eq. 8.22).35a A-Tosyl-3-nitroindole undergoes high-yielding Diels-Alder reactions with... [Pg.240]

The study of the cycloaddition behavior of l,l-dichloro-2-neopentylsilene, C Si =CHCH2Bu (2) [3], reveals the high polarity of the Si=C bond and a strong electrophilicity. The [4+2] cycloaddition reactions with anthracene (3), cyclopentadiene (4) and fulvenes (5) proceed as expected surprising, however, the Diels-Alder reactions with dienes are of lower activity, like naphthalene (6) and furans (7). [Pg.105]

The heteroaromatic compounds like furans, pyrroles or thiophenes cannot be generally used as dienes in Diels-Alder syntheses, because at the higher temperature required for the addition of less reactive dienophiles, the equilibrium is on the side of the starting materials due to the unfavorable T AS term comparable to the benzenoid aromatic compounds as mentioned. High pressure again shows the two effects already discussed the shift of the equilibrium toward the products and the enhancement of the rate of reaction which allows the temperature of reaction to be lowered. One... [Pg.575]


See other pages where Diels-Alder dienes Furan is mentioned: [Pg.56]    [Pg.1412]    [Pg.412]    [Pg.211]    [Pg.64]    [Pg.64]    [Pg.85]    [Pg.31]    [Pg.2]    [Pg.72]    [Pg.140]    [Pg.240]    [Pg.227]    [Pg.229]    [Pg.50]    [Pg.42]    [Pg.166]    [Pg.558]    [Pg.580]   
See also in sourсe #XX -- [ Pg.173 ]




SEARCH



2- furan, Diels-Alder

Diels furan

Diels-Alder dienes

Diels-Alder reactions cyclic dienes: furans

Diels-Alder reactions of furan dienes

© 2024 chempedia.info