Diacid synthesis

Chemical Properties. Trimethylpentanediol, with a primary and a secondary hydroxyl group, enters into reactions characteristic of other glycols. It reacts readily with various carboxyUc acids and diacids to form esters, diesters, and polyesters (40). Some organometaUic catalysts have proven satisfactory for these reactions, the most versatile being dibutyltin oxide. Several weak bases such as triethanolamine, potassium acetate, lithium acetate, and borax are effective as stabilizers for the glycol during synthesis (41). 

Oxalyl Chloride. This diacid chloride [79-37-8], ClCOCOCl, mol wt 126.9, is produced by the reaction of anhydrous oxaUc acid and phosphoms pentachloride. The compound vigorously reacts with water, alcohols, and amines, and is employed for the synthesis of agrochemicals, pharmaceuticals, and fine chemicals. 

Other Preparative Reactions. Polyamidation has been an active area of research for many years, and numerous methods have been developed for polyamide formation. The synthesis of polyamides has been extensively reviewed (54). In addition, many of the methods used to prepare simple amides are appHcable to polyamides (55,56). Polyamides of aromatic diamines and aUphatic diacids can also be made by the reaction of the corresponding aromatic diisocyanate and diacids (57). 

Fig. 3. Synthesis of diacidic and monoacidic N-1 a2etidinone phosphonates and phosphinates where TMSBr is trimethylsilyl bromide BSA is...

Nylon resins are made by numerous methods (53) ranging from ester amidation (54) to the Schotten-Baumann synthesis (55). The most commonly used method for making nylon-6,6 and related resins is the heat-induced condensation of monomeric salt complexes (56). In this process, stoichiometric amounts of diacid and diamine react in water to form salts. Water is removed and further heating converts the carboxylate functions to amide linkages. Chain lengths are controlled by small amounts of monofunctional reagents. The molten finished nylon resin can be dkectly extmded to pellets. 

The synthesis of this series involved the reaction of disubstituted or benzo fused 6-keto(formyl)-2-cyclohexenones with hydroxylamine (Scheme 176), Base degradation gave a-cyanoketones which can be further degraded to diacids (67AHC(8)277, 80IJC(B)406). 

Guareschi imides are useful synthetic intermediates. They are formed from a ketone reacting with two equivalents of the cyanoacetic esters and ammonia. This transformation is illustrated in the formation of 4,4-dimethylcyclopentenone 30.The synthesis was initiated with the Guareschi reaction of 3-pentanone 27 with 28 to generate imide 29. This product was hydrolyzed to the diacid and esterified. Cyclization of the diester via acyloin condensation followed by hydrolysis and dehydration afforded the desired target 30. 

Hie most representative member of this class of polyesters is the low-molar-mass (M 1000-3000) hydroxy-terminated aliphatic poly(2,2/-oxydiethylene adipate) obtained by esterification between adipic acid and diethylene glycol. This oligomer is used as a macromonomer in the synthesis of polyurethane elastomers and flexible foams by reaction with diisocyanates (see Chapter 5). Hydroxy-terminated poly(f -caprolactonc) and copolyesters of various diols or polyols and diacids, such as o-phthalic acid or hydroxy acids, broaden the range of properties and applications of polyester polyols. 

The carboxy-hydroxy reaction (direct esterification) is the most straightforward method of polyester synthesis. It was first reported in the 1930s by Carothers10 12 and is still a very widely used method for the synthesis of polyesters from diacids and diols (Scheme 2.12) or from hydroxy acids (Scheme 2.13). Direct... 

It is also possible to prepare them from amino acids by the self-condensation reaction (3.12). The PAs (AABB) can be prepared from diamines and diacids by hydrolytic polymerization [see (3.12)]. The polyamides can also be prepared from other starting materials, such as esters, acid chlorides, isocyanates, silylated amines, and nitrils. The reactive acid chlorides are employed in the synthesis of wholly aromatic polyamides, such as poly(p-phenyleneterephthalamide) in (3.4). The molecular weight distribution (Mw/Mn) of these polymers follows the classical theory of molecular weight distribution and is nearly always in the region of 2. In some cases, such as PA-6,6, chain branching can take place and then the Mw/Mn ratio is higher. 

PA-6,10 is synthesized from 1,6-hexamethylenediamine and sebacic acid, and PA-6,12 from 1,6-hexamethylenediamine and dodecanedioic acid. The melt synthesis from their salts is very similar to PA-6,6 (see Example 1). These diacids are less susceptible to thermal degradation.55 PA-6,10 can also be synthesized by interfacial methods at room temperature starting with the very reactive sebacyl dichloride.4 35 A demonstration experiment for interfacial polycondensation without stirring can be carried out on PA-6,10. In this nice classroom experiment, a polymer rope can be pulled from the polymerization interface.34... 

The partially aromatic PAs are exclusively made of die diamine-diacid type and not die amine-acid type. The aromatic diamines, similar to phenylene diamines, color easily and dieir polymers are conjugated, having a golden brown color. The aromatic diacids used in the formation of partially aromatic PAs are mainly terephthalic and isophthalic acids. Starting with the diacids, the PA salt is made first and with this the salt prepolymers are prepared. The prepolymerization is usually carried out in an autoclave to prevent die sublimation of the reactants. In a laboratory synthesis it would be preferable to avoid this autoclave step as one is not always available. It is possible to start with the more reactive esters, such as diphenyl isophtiialate, or with the acid chlorides starting with the reactive isocyanates is, in principle, also possible. The terephthalic and isophthalic acids are also used to modify PA-6,6 and PA-4,6 to more dimensionally stable copolymers.6,18... 

Photosensitive functions are in many cases also heat sensitive, so the preparation of photosensitive polyimides needs smooth conditions for the condensations and imidization reactions. Some chemical reactants, which can be used for polyamide preparation, have been patented for the synthesis of polyimides and polyimide precursors. For example, chemical imidization takes place at room temperature by using phosphonic derivative of a thiabenzothiazoline.102 A mixture of N -hydroxybenzotriazole and dicyclohexylcarbodiimide allows the room temperature condensation of diacid di(photosensitive) ester with a diamine.103 Dimethyl-2-chloro-imidazolinium chloride (Fig. 5.25) has been patented for the cyclization of a maleamic acid in toluene at 90°C.104 The chemistry of imidazolide has been recently investigated for the synthesis of polyimide precursor.105 As shown in Fig. 5.26, a secondary amine reacts with a dianhydride giving meta- and para-diamide diacid. The carbonyldiimidazole... 

Aliphatic-aromatic copoly imides, 268 Aliphatic-aromatic polyesters, 18, 19 Aliphatic degradable polyesters, 41 Aliphatic diacids, polyamide synthesis from, 183-184... 

Diacetoxybenzoic acid, synthesis and polymerization of, 116-118 Diacid, anhydride, and diol reaction, 97 Diacid chloride-diol solution reactions, 75-77... 

Diisocyanate-diacid polyamides, 157 Diisocyanates, polyamide synthesis from, 184... 

Poly(ethylene adipate), synthesis by diacid-diol reaction, 95-97 Poly(ethylene isophthalate) (PEI) homopolyesters, 89-90 Poly (ethylene isophthalate-co-tere-phthalate) (PEIT), synthesis of, 106-107... 

Faraday, in 1834, was the first to encounter Kolbe-electrolysis, when he studied the electrolysis of an aqueous acetate solution [1], However, it was Kolbe, in 1849, who recognized the reaction and applied it to the synthesis of a number of hydrocarbons [2]. Thereby the name of the reaction originated. Later on Wurtz demonstrated that unsymmetrical coupling products could be prepared by coelectrolysis of two different alkanoates [3]. Difficulties in the coupling of dicarboxylic acids were overcome by Crum-Brown and Walker, when they electrolysed the half esters of the diacids instead [4]. This way a simple route to useful long chain l,n-dicarboxylic acids was developed. In some cases the Kolbe dimerization failed and alkenes, alcohols or esters became the main products. The formation of alcohols by anodic oxidation of carboxylates in water was called the Hofer-Moest reaction [5]. Further applications and limitations were afterwards foimd by Fichter [6]. Weedon extensively applied the Kolbe reaction to the synthesis of rare fatty acids and similar natural products [7]. Later on key features of the mechanism were worked out by Eberson [8] and Utley [9] from the point of view of organic chemists and by Conway [10] from the point of view of a physical chemist. In Germany [11], Russia [12], and Japan [13] Kolbe electrolysis of adipic halfesters has been scaled up to a technical process. 

Suggest some ideas for a radical synthesis of diacid (25). 

Krapcho and Vivelo have described a new formal total synthesis of tropinone (124) and ( )-cocaine (98) (94). Cycloaddition of IV-methylpyrrole (182) and acetylenedicarboxylic acid leads to 183, which is hydrogenated to 184. The diacid mixture 184 is refluxed in MeOH/HCl to yield the diester mixture 185. Addition of this to an excess of metallic sodium in liquid ammonia at — 78°C leads to the N-methylpyrrolidine derivative 186 (cf. 95), whose diethyl analog 147 has earlier been converted to tropinone (124) and (+)-cocaine (98) (78-80) (Scheme 13). 

If the polyester synthesis is performed with equimolar amounts of diol and diacid, then, in addition to hydroxy, carboxy-terminated oligomers, dihydroxy- and dicarboxy-terminated oligomers are formed, as shown below. In a thermodynamic equilibrium, the molar ratios of the three functionality fractions should be 2 1 1, respectively. 

---