Schotten-Baumann

In the Schotten-Baumann method of benzoylation, the hydroxyl- or amino-compound (or a salt of the latter) is dissolved or suspended in an excess of 10% aqueous sodium hydroxide solution, a small excess (about 10% more than the theoretical amount) of benzoyl chloride is then added and the mixture vigorously shaken. Benzoylation proceeds smoothly under these conditions, and the solid benzoyl compound, being insoluble in water, separates out. The sodium hydroxide then hydrolyses the excess of benzoyl chloride, giving sodium... 

Thus phenol when subjected to the Schotten Baumann reaction first dissolves in the sodium hydroxide to give sodium phenoxide, which then undergoes CgH COCl + NaOCgH, CgHaCOOCeHj XaCl... 

When these benzoyl compounds separate in the course of the Schotten-Baumann reaction, they frequently occlude traces of unchanged benzoyl chloride, which thus escapes hydrolysis by the alkali it is advantageous there fore to recrystallise the benzoyl compounds whenever possible from ethanol or methylated spirit, since these solvents will esterify the unchanged chloride and so remove the latter from the recrystallised material. 

The Schotten-Baumann reaction may also be carried out, using, for example, benzene sulphonyl chloride, CeH,SO,Cl (. e., the acid chloride of benzene sulphonic acid, C H5SOjOH) in place of benzoyl chloride, and similar deri a-tives are obtained. Thus when phenol is dissolved in an excess of 10% sodium hydroxide solution, and then shaken with a small excess of benzene sulphonyl... 

The acidic properties of sulphonamides and their mono-substitution derivatives are particularly well illustrated in the alkyl ubstitution compounds, which by reason of these properties can be prepared by two distinct methods. Thus mono- and di-ethylamine, when subjected to the Schotten-Baumann reaction using benzenesulphonyl chloride, gi e benzenesulphonethylamide, and bcnzenesulphondiethylamide respectively. These compounds can also... 

Although benzenesulphonyl chloride has for simplicity been used in the above discussion, tolucne-/>- sulphonyl chloride, CHaCeH SO Cl, is more frequently used in the laboratory, owing to its much lower cost, the latter being due in turn to the fact that toluene-p-sulphonyl chloride is a by-product in the commercial preparation of saccharin. Toluene-p sulphonyl chloride is a crystalline substance, of m.p. 68° the finely powdered chloride will, however, usually react readily with amines in the Schotten-Baumann reaction it does not react so readily with alcohols, but the reaction may be promoted considerably by first dissolving the chloride in some inert water-soluble solvent such as acetone. 

Give benzoyl and toluene-/>-sulphonyl derivatives (Schotten-Baumann reaction) (p. 243) also benzene-sulphonyl derivatives. 

B) Benzoyl derivatives. Most amino-acids can be benzoyl-ated when their solutions in 10% aqueous sodium hydroxide are shaken with a small excess of benzoyl chloride until a clear solution is obtained (Schotten-Baumann reaction, p. 243). Acidification of the solution then precipitates the benzoyl derivative and the excess of benzoic acid, and the mixture must be filtered off, washed with water, and recrystallised (usually from ethanol) to obtain the pure derivative. (M.ps., p. 555 )... 

The dibenzoyl derivatives can be prepared by the normal Schotten-Baumann method, using 10% aqueous sodium hydroxide and an excess of benzoyl chloride, but the m.ps. of the dibenzoyl derivatives are inconveniently high (p- ssO-... 

Examples of benzoylation under Schotten-Baumann conditions are —... 

Benzoyl derivatives. Both primary and secondary amines form benzoyl derivatives under the conditions of the Schotten-Baumann reaction (see Section IV,52 and preceding discussion). 

The Schotten - Baumann method of benzoylation with benzoyl chloride in the presence of aqueous sodium hydroxide may be used. Full details are given under Amines Section IV.lOO, 2. 

By the Schotten-Baumann reaction. Under the usual Schotten-Baumann conditions (compare discussion preceding Section IV,52, also Section IV,100,2and Section IV,114,2), esters are readily formed, forexample ... 

Bemoyl chloride may replace acetyl chloride as a class reagent it possesses the advantage that it is only very slowly decomposed by cold water and consequently may be employed for detecting alcohols even in aqueous solution. The reaction is usually carried out in aqueous solution containing sufficient caustic alkali to decompose any excess of benzoyl chloride into the water-soluble alkali benzoate (Schotten - Baumann reaction compare Section IV,52). The benzoyl esters formed are insoluble in water ... 

Pinacol-pinacolone rearrangement Prileschajew epoxidation reaction Reformataky reaction Reimer-Tiemanii reaction Rosenmund reduction Sandmeyer reaction Schiemaim reaction Schmidt reaction or rearrangement Schotten-Baumann reaction Skraup reaction Sommelet reaction. ... 

Esterification of acid chlorides (Schotten-Baumann reaction) ... 

Schotten-Baumann alkaline conditions from primary and secondary amines using acid chlorides ben2amides from ben2oyl chloride distinguish 1 ° and 2°... 

Arninobenzoyl-L-glutarnic acid (12) is obtained by condensation of -nitrobenzoyl chloride [122-04-3] (18) with L-glutamic acid [56-86-0] (19) under Schotten-Baumann conditions. This is followed by reduction of the nitro group with either sodium hydrogen sulfide (29) or by electrochemical methods (30). 

Nylon resins are made by numerous methods (53) ranging from ester amidation (54) to the Schotten-Baumann synthesis (55). The most commonly used method for making nylon-6,6 and related resins is the heat-induced condensation of monomeric salt complexes (56). In this process, stoichiometric amounts of diacid and diamine react in water to form salts. Water is removed and further heating converts the carboxylate functions to amide linkages. Chain lengths are controlled by small amounts of monofunctional reagents. The molten finished nylon resin can be dkectly extmded to pellets. 

The acid chlorides are generally more reactive than the corresponding acid anhydrides. In fact, the alcoholysis of acid chlorides is probably the best laboratory method for preparing esters. Frequentiy, basic materials are added during the course of the reaction to neutralize by-product hydrochloric acid. When the basic material is aqueous caustic, the procedure is referred to as the Schotten-Baumann procedure (73). Esterification of tertiary alcohols by acid chlorides is described in Reference 74. Esters of tertiary alcohols can also be formed through an intermediate /-butyl thioate group (75) ... 

Azoles containing a free NH group react comparatively readily with acyl halides. N-Acyl-pyrazoles, -imidazoles, etc. can be prepared by reaction sequences of either type (66) -> (67) or type (70)->(71) or (72). Such reactions have been carried out with benzoyl halides, sulfonyl halides, isocyanates, isothiocyanates and chloroformates. Reactions occur under Schotten-Baumann conditions or in inert solvents. When two isomeric products could result, only the thermodynamically stable one is usually obtained because the acylation reactions are reversible and the products interconvert readily. Thus benzotriazole forms 1-acyl derivatives (99) which preserve the Kekule resonance of the benzene ring and are therefore more stable than the isomeric 2-acyl derivatives. Acylation of pyrazoles also usually gives the more stable isomer as the sole product (66AHCi6)347). The imidazole-catalyzed hydrolysis of esters can be classified as an electrophilic attack on the multiply bonded imidazole nitrogen. 

Schotten-Baumann reaction, 5, 745 stability, 5, 744 structure, 5, 736-743 substituents reactions, 5, 83... 

The choice of which reactions to include is not an easy one. First there are the well known "Name Reactions", that have appeared in various monographs or in the old Merck index. Some of these are so obvious mechanistically to the modern organic chemistry practitioner that we have in fact omitted them for instance esterification of alcohols with acid chlorides - the Schotten-Baumann procedure. Others are so important and so well entrenched by name, like the Baeyer-Villiger ketone oxidation, that it is impossible to ignore them. In general we have kept older name reactions that are not obvious at first glance. 

As with poly(vinyl alcohol), poly(vinyl cinnamate) is prepared by chemical modification of another polymer rather than from monomer . One process is to treat poly(vinyl alcohol) with cinnamoyl chloride and pyridine but this is rather slow. Use of the Schotten Baumann reaction will, however, allow esterification to proceed at a reasonable rate. In one example poly(vinyl alcohol) of degree of polymerisation 1400 and degree of saponification of 95% was dissolved in water. To this was added a concentrated potassium hydroxide solution and then cinnamoyl chloride in methyl ethyl ketone. The product was, in effect a vinyl alcohol-vinyl cinnamate copolymer Figure 14.8)... 

Tosylates are generally formed from an amine and tosyl chloride in an inert solvent such as CH2CI2 with an acid scavenger such as pyridine or triethyl-amine, They may also be prepared using the Schotten-Baumann reaction. 

The Bts derivative is formed from the sulfonyl chloride, either using apro-tic conditions for simple amines or by the Schotten-Baumann protocol for amino acids (87-97% yield). The primary drawback of this reagent is that its stability depends on its quality. It can on occasion rapidly and exothermically lose SO2 to give 2-chlorobenzothiazole. ... 

Acylation of j8-carboline under Schotten-Baumann conditions yields the ind-N-, cy derivative. An intramolecular acylation of the cis-isomer of 278 to yield 279 has been carried out (see Section V). On the other hand, intramolecular acylation at the pyr-N of a j8-carboline, in the instance of the spontaneous cyclization of 281 to the pentacyclic compound 282, has been reported. 

A phenylacetonitrile derivative, closantel (41), is an anthelmintic agent useful against sheep liver flukes. Its patented synthesis involves a Schotten-Baumann amidation... 

Conversion of m-bromobenzonitrile to the tetrazole and addition of the elements of acrylic acid gives 7S, starting material for the patented synthesis of the antiinflammatory agent, bropera-mole (76). The synthesis concludes by activation with thionyl chloride and a Schotten-Baumann condensation with piperidine. 

Efficient synthetic methodologies for N-acylation of 6-APA have been developed. Ampiciilin, for instance, can be prepared conveniently by acylation with phenylglycyl chloride hydrochloride under Schotten-Baumann conditions in an aqueous medium. As circumstances require, either ampiciilin anhydrate, ampiciilin trihydrate or ampidllin sodium can easily be produced on an industrial scale. 

---