Diacid aliphatic

Nylon A class of synthetic fibres and plastics, polyamides. Manufactured by condensation polymerization of ct, oj-aminomonocarboxylic acids or of aliphatic diamines with aliphatic dicarboxylic acids. Also rormed specifically, e.g. from caprolactam. The different Nylons are identified by reference to the carbon numbers of the diacid and diamine (e.g. Nylon 66 is from hexamethylene diamine and adipic acid). Thermoplastic materials with high m.p., insolubility, toughness, impact resistance, low friction. Used in monofilaments, textiles, cables, insulation and in packing materials. U.S. production 1983 11 megatonnes. 

In addition to a block copolymer, a microcapsule was made from suspension interfacial polycondensation between diacid chloride having aromatic-aliphatic azo group and aliphatic triamine [70,71]. The capsule was covered with a crosslinked structure having an azo group that was thermally stable but sensitive to light so as to be applicable to color photoprinting materials. 

Polyesters are the most important class of synthetic fibers. In general, polyesters are produced by an esterification reaction of a diol and a diacid. Carothers (1930) was the first to try to synthesize a polyester fiber by reacting an aliphatic diacid with a diol. The polymers were not suitable because of their low melting points. However, he was successful in preparing the first synthetic fiber (nylon 66). In 1946, Whinfield and Dickson prepared the first polyester polymer by using terephthalic acid (an aromatic diacid) and ethylene glycol. 

Melt spinning polyesters is preferred to solution spinning because of its lower cost. Due to the hydrophobic nature of the fiber, sulfonated terephthalic acid may be used as a comonomer to provide anionic sites for cationic dyes. Small amounts of aliphatic diacids such as adipic acid may also be used to increase the dyeability of the fibers by disturbing the fiber s crystallinity. 

Hie most representative member of this class of polyesters is the low-molar-mass (M 1000-3000) hydroxy-terminated aliphatic poly(2,2/-oxydiethylene adipate) obtained by esterification between adipic acid and diethylene glycol. This oligomer is used as a macromonomer in the synthesis of polyurethane elastomers and flexible foams by reaction with diisocyanates (see Chapter 5). Hydroxy-terminated poly(f -caprolactonc) and copolyesters of various diols or polyols and diacids, such as o-phthalic acid or hydroxy acids, broaden the range of properties and applications of polyester polyols. 

Depending on dieir structure, properties, and syndietic methods, degradable polyesters can be divided into four groups poly(a-esters), poly(fi-esters), poly(lactones), and polyesters of aliphatic diols and diacids. 

Morgan and Kwolek33 have described a large number of PA derived from phenylenediamines and aliphatic diacids by low-temperature solution polymerization starting with aliphatic diacid chlorides. 

Aliphatic-aromatic copoly imides, 268 Aliphatic-aromatic polyesters, 18, 19 Aliphatic degradable polyesters, 41 Aliphatic diacids, polyamide synthesis from, 183-184... 

Poly (anhydrides) based on aliphatic-aromatic diacids. Macromolecules. In Press. 

The introduction of any flexible molecular repeat units, such as long-chain aliphatic diols or diacids, large hydrocarbon phases, such as C36 dimer acid,... 

Crystalline polyesters from CHDM and aliphatic diacids are possible, but generally of little interest because of low melting points and low glass transition temperatures. Cyclic aliphatic diacids offer some potentially attractive possibilities. For example, the polyester of CHDM with a high-frans isomer 1,4-cyclohexanedicarboxylate has a melting point ( 225°C) similar to that of PBT [53],... 

---