Detergents consumption

Over the last decades, however, requirements have changed, and the customer expects improved functionality as well as reduced and carefully controlled energy, water and detergent consumption. 

Water consumption 49/391 for 5 kg Rinsing vs. detergent consumption Keep performance... 

Detergent consumption included in phosphate fertilizer category. 

Lubricants. Petroleum lubricants continue to be the mainstay for automotive, industrial, and process lubricants. Synthetic oils are used extensively in industry and for jet engines they, of course, are made from hydrocarbons. Since the viscosity index (a measure of the viscosity behavior of a lubricant with change in temperature) of lube oil fractions from different cmdes may vary from +140 to as low as —300, additional refining steps are needed. To improve the viscosity index (VI), lube oil fractions are subjected to solvent extraction, solvent dewaxing, solvent deasphalting, and hydrogenation. Furthermore, automotive lube oils typically contain about 12—14% additives. These additives maybe oxidation inhibitors to prevent formation of gum and varnish, corrosion inhibitors, or detergent dispersants, and viscosity index improvers. The United States consumption of lubricants is shown in Table 7. 

The greatest amount of surfactant consumption is in packaged soaps and detergents for household and industrial use. The remainder is used in processing textiles and leather, in ore flotation and oil-drilling operations, and in the manufacture of agricultural sprays, cosmetics, elastomers, food, lubricants, paint, pharmaceuticals, and a host of other products. 

Sulfates of sodium are iadustriaUy important materials commonly sold ia three forms (Table 1). In the period from 1970 to 1981, > 1 million metric tons were consumed aimuaHy ia the United States. Siace then, demand has declined. In 1988 consumption dropped to 890,000 t, and ia 1994 to 610,000 t (1,2). Sodium sulfate is used principally (40%) ia the soap (qv) and detergent iadustries. Pulp and paper manufacturers consume 25%, textiles 19%, glass 5%, and miscellaneous iadustries consume 11% (3). About half of all sodium sulfate produced is a synthetic by-product of rayon, dichromate, phenol (qv), or potash (see Chromium compounds Fibers, regenerated cellulosics Potassium compounds). Sodium sulfate made as a by-product is referred to as synthetic. Sodium sulfate made from mirabilite, thenardite, or naturally occurring brine is called natural sodium sulfate. In 1994, about 300,000 t of sodium sulfate were produced as a by-product another 300,000 t were produced from natural sodium sulfate deposits (4). 

Sodium sulfate is also used as a filler in powdered soap and detergents. Introduction of Hquid detergents, in which Na2S04 is not used, has also resulted in lower consumption of the sulfate. 

The principle uses of Na2S04 are in the manufacture of paper, soaps, and detergents. These accounted for 65% of U.S. consumption from 1990 to 1995, representing a significant shift from 1980 when paper production alone consumed 67%. Pulp (qv) and paper consume only 25% (2). The kraft paper process uses a mixture of sodium sulfide and sodium hydroxide to digest wood chips. Both the sulfide and hydroxide are generated, starting with sodium sulfate as the raw material. 

Economic Aspects. Sodium hypochlorite—trisodium phosphate complex was commercialized in 1930. Chlorinated TSP is manufactured by Stauffer (a subsidiary of Rhc ne-Poulenc, Inc.). The consumption, steadily decreasing since 1980, dropped sharply in 1985 because of reduced use in dishwasher detergents. The estimated demand in 1987 was 37,360 t (220). In 1988 it sold for 0.32/lb ( 0.70/kg) for tmddoad quantities of 660 kg (300-lb) dmms. 

By far the greatest consumption of pure aqueous phosphoric acid is in the preparation of various salts for use in the food, detergent and tooth-paste industries (p. 524). When highly diluted the free acid is non-toxic and devoid of odour, and is extensively used to impart the sour or tart taste to many soft drinks ( carbonated beverages ) such as the various colas ( 0,05% H3PO4, pH 2,3), root beers ( 0.01% H3PO4, pH 5,0), and sarsaparilla ( 0.01% H3PO4, pH 4.5). 

The introduction of concentrated laundry detergent powders in Japan during 1986-1987 produced a substantial increase in the consumption of LAB in the subsequent 3-4 years as the market changed from low-density, spray-dried powders to the concentrated (compact) products. In these products, which may contain up to 40% surfactant, the cost/performance advantages of LAS are of significance. In addition, LAB sulfonic acid is well suited for the production of high-active, high-density (about 1.0 g/cm3) laundry powders by routes other... 

The total worldwide consumption of AOS in 1990 was of the order of 85,000 tonnes [12] split between household products (55,000 tonnes) toiletries and personal care products (20,000 tonnes), and industrial and institutional uses (10,000 tonnes). The worldwide consumption of all synthetic detergents in 1990 was as follows (1) anionics (3,390,000 tonnes), cationics (815,000 tonnes), and nonionics (910,000 tonnes). From the total of 5,115,000 tonnes, AOS consumption accounts for 1.5%. 

Also the a-ester sulfonates are less important today. In the Federal Republic of Germany, for example, the total production of surfactants was about 700,000 t/a in 1993. For a more detailed analysis of different types of surfactants, use must be made of data collected before the unification of Germany. In 1988 the consumption of surfactants in detergents was about 227,500 t/a, the consumption of anionic surfactants was about 116,000 t/a and less than 1000 t/a of a-sulfo fatty acid esters [5] (the values refer to German Detergent Law). 

The consumption of these phosphonates in textile processing is small in relation to that of the aminopolycarboxylates they are mainly used in detergent formulations [21,22] as sodium, potassium, ammonium or alkanolamine salts. 

---