Definition of adhesives and adhesive bonding

Definition of Adhesives and Adhesive Bonding Functions of Adhesives Classification of Adhesives Advantages and Disadvantages of Joining Using Adhesives... 

A more strict approach to the characterisation of the effect under consideration is the concept of the unscreened perimeter of any object introduced in [34], for a filler. This perimeter is a measure of the accessibility for the formation of adhesion bonds [34]. The particulate-filled polymers at a definite values of (pf may be considered as percolation clusters with the first percolation threshold (pf = 0.15-0.17 [35]. Because the maximum value of (pf for the composites considered in this paper is equal to 0.176, one can believe these systems are below the percolation threshold and from them the following relationship is valid [34] ... 

Abstract This introductory chapter gives a brief description of adhesive bonding and adhesion-related phenomena. The major definitions of the terms associated to this technology such as adhesion, cohesion, adhesives, sealants, and adherends are given so that there is uniformity of language throughout the handbook. The reasons that drove the editors to prepare this book are explained. Finally, the organization of the book is described. 

The van der Waals and other non-covalent interactions are universally present in any adhesive bond, and the contribution of these forces is quantified in terms of two material properties, namely, the surface and interfacial energies. The surface and interfacial energies are macroscopic intrinsic material properties. The surface energy of a material, y, is the energy required to create a unit area of the surface of a material in a thermodynamically reversible manner. As per the definition of Dupre [14], the surface and interfacial properties determine the intrinsic or thermodynamic work of adhesion, W, of an interface. For two identical surfaces in contact ... 

The performance of a product where adhesion plays a role is determined both by its adhesive and cohesive properties. In the case of silicones, the promotion of adhesion and cohesion follows different mechanisms [37]. In this context, adhesion promotion deals with the bonding of a silicone phase to the substrate and reinforcement of the interphase region formed at the silicone-substrate interphase. The thickness and clear definition of this interphase is not well known, and in fact depends on many parameters including the surface physico-chemistry of... 

Ball, USP 2,643,611(1953) CA 47,9016 (1953)(Inhibitor strips for large-grain rocket propellants are attached by means of an adhesive consisting of NC dissolved in Et lactate, cello solve, mesiryl oxide, Bu acetate or diacetone alcohol. These solvents act as a mutual plasticiser for the material of the inhibitor strip and for the propellant itself) 5)G.Epstein, "Adhesive Bonding of Metals," Reinhold, NY(1954> 6)ASTM Committee D-l4on Adhesives, Standards on Adhesives, Specifications, Physical Tests, Definitions, Philadelphia, Penna(1954) 7)... 

This section focuses on adhesives that are used for the assembly of medical devices. In medical device assembly, the primary substrates are plastics, elastomers, and metals. The total medical adhesive market is much larger since it encompasses a broader definition of products. For example, medical adhesives can be used for bonding human tissue, transdermal drug delivery systems, dental restoration, and wound care in addition to medical device assembly. 

The development of methods for the use of MAP in wound repair required two parallel sets of definitions. The first involved MAP itself with the investigation of concentrations of protein and ratios of crosslinking catalyst that yielded sufficient bond strengths. The second was the choice of model systems and the analysis of tissue-related parameters that impinged on adhesion testing. The complexity of tissues necessitated that special attention be given to many details so that reliable test data could be obtained. 

According to the definition of the work of adhesion Wa in terms of bond energies (equation (1.12) with A = M and B = AO), Wa is proportional to em-ao where em-ao is an average interaction energy between M atoms and oxide ions. Clearly, Wa is proportional to an absolute bond energy while AHf(MO) is proportional to a difference of bond energies. As a result, the interfacial quantity to be used in a correlation with AHc(mo) should not be Wa but the work of immersion W, which, taking into account its definition (equation (1.54)) and expressions (1.9) to (1.11) of <7SV and [Pg.208]

This brief summary report describes the state of the art of all types of cellular materials, particularly plastics and elastomers. The report is organized in the form of a handbook and has an Introduction and sections on Types of Foams (Cellular Materials), Methods of Manufacture, Foam Properties, Solvent Cementing and Adhesive Bonding of Foams, Methods of Making Foams Conductive, and Applications. There are two Appendices, one on Standardization Documents (Test Methods, Practices and Specifications) and the other on Definitions. 

Several terms are used to describe important aspects of the formulation or functioning of adhesives, and of equipment for doing adhesive bonding. Some of these terms, and their definitions, are the following ... 

---