Adhesion, definition

Absolute porosity, definition, 220 Absolute viscosity, definition, 386 Acid number (total acid number, TAN), definition, 403 Adhesion, definition, 26-27 Adsorbed polymer layers, interaction with droplets, 62 Adsorption definition, 386... 

Alternatively, in combination with the definition of work of adhesion (Eq. XII-... 

Equation X-17 was stated in qualitative form by Young in 1805 [30], and we will follow its designation as Young s equation. The equivalent equation, Eq. X-19, was stated in algebraic form by Dupre in 1869 [31], along with the definition of work of adhesion. An alternative designation for both equations, which are really the same, is that of the Young and Dupre equation (see Ref. 32 for an emphatic dissent). 

Fig. 3. Definition of thermodynamic work of adhesion, Wa (a) disjoining surfaces in vacuum (b) disjoining surfaces in fluid medium m and (c) disjoining surfaces in presence of vapors from adhesive.

The van der Waals and other non-covalent interactions are universally present in any adhesive bond, and the contribution of these forces is quantified in terms of two material properties, namely, the surface and interfacial energies. The surface and interfacial energies are macroscopic intrinsic material properties. The surface energy of a material, y, is the energy required to create a unit area of the surface of a material in a thermodynamically reversible manner. As per the definition of Dupre [14], the surface and interfacial properties determine the intrinsic or thermodynamic work of adhesion, W, of an interface. For two identical surfaces in contact ... 

For the sake of completeness, it is worthwhile to briefly discuss role of acid-base interactions in adhesion. In this context, the term acid refers to a Lewis acid (an electron acceptor) and a Lewis base (electron donor), rather than the more conventional acid and base definitions. The role of acid-base interactions in adhesion is discussed in detail by Lee [105]. 

The following points are abstracted from the definition of the Pressure Sensitive Tape Council [4]. A pressure sensitive adhesive is ... 

The definition is intended to differentiate these adhesives from merely sticky materials like flypaper or materials that may have only substrate specific adhesion. 

Compatibility. Clear definition of compatibility is rather difficult. Compatibility has been defined as the ability of two or more materials to exist in close and permanent association for an indefinite period without phase separation and without adverse effect of one on the other [28]. On the other hand, compatibility is easily recognized in solvent-borne adhesives as a homogeneous blend of materials without phase separation. Normally, compatibility is understood as a clear transparent mixture of a resin with a given polymer. But, compatibility is a more complex thermodynamic phenomenon which can be evaluated from specific... 

The performance of a product where adhesion plays a role is determined both by its adhesive and cohesive properties. In the case of silicones, the promotion of adhesion and cohesion follows different mechanisms [37]. In this context, adhesion promotion deals with the bonding of a silicone phase to the substrate and reinforcement of the interphase region formed at the silicone-substrate interphase. The thickness and clear definition of this interphase is not well known, and in fact depends on many parameters including the surface physico-chemistry of... 

As has been extensively discussed, the efficiency of fiber treatment is mainly interdependent with the adhesion between matrix and fiber. This has been shown, for example, in examinations of wood fiber HDPE composites by Raj et al. [56]. Similar results, with definite... 

---