Data, results, and units

Data, Results, and Units English and Metric Units Unit Conversion English and Metric Systems Conversion of Units within the Same System Conversion of Units from One System to Another... 

Repeated twisting of the spindle s tube or the solid shaft used in jackshafts results in a reduction in the flexible drive s stiffness. When this occurs, the drive loses some of its ability to absorb torsional transients. As a result, damage may result to the driven unit. Unfortunately, the limits of single-channel, frequency-domain data acquisition prevents accurate measurement of this failure mode. Most of the abnormal vibration that results from fatigue occurs in the relatively brief time interval associated with startup, when radical speed changes occur, or during shutdown of the machine-train. As a result, this type of data acquisition and analysis cannot adequately capture these... 

When all units have failed, the result is complete data. Singly-censored data result in life testing when testing is terminated before all units fail. And multiply-censored data result from ... 

All setup data and results are stored in Data Resource Files rather than standard sequential or random access files. This has turned out to be a key feature contributing to a flexible and low maintenance system. These are ASCII files which can be typed to the screen, printed, or edited with a word processor. They contain information organized by variable name, value, and units. The following is an example of a data resource file ... 

The posttrial bum period is the time for U.S. EPA to evaluate all of the data that were recorded during the incinerator s trial burn. To allow the operation of a hazardous waste incinerator following the completion of the trial bum, U.S. EPA establishes permit conditions sufficient to ensure that the unit will meet the incinerator performance standards. This posttrial burn period is limited to the minimum time required to complete the sampling, analysis, data computation of trial bum results, and the submission of these results to U.S. EPA. 

The application was a model test only and no attempt was made to acquire or validate site-specific source data. Specific and prototype point sources and area sources were included most risk came from the nonspecific, hypothetical sources. Risk was computed using unvalldated, hypothetical unit risk factors. Sample graphical results are presented in Figures 3, 4, and 5. 

However, its was found possible to infer all four microscopic tensor coefficients from macroscopic crystalline values and this impossibility could be related to the molecular unit anisotropy. It can be shown that the molecular unit anisotropy imposes structural relations between coefficients of macroscopic nonlinearities, in addition to the usual relations resulting from crystal symmetry. Such additional relations appear for crystal point group 2,ra and 3. For the monoclinic point group 2, this relation has been tested in the case of MAP crystals, and excellent agreement has been found, triten taking into account crystal structure data (24), and nonlinear optical measurements on single crystal (19). This approach has been extended to the electrooptic tensor (4) and should lead to similar relations, trtten the electrooptic effect is primarily of electronic origin. 

Thus, initial inspection of the nature of the petroleum will provide deductions about the most logical means of cleanup and any subsequent enviromnental effects. Indeed, careful evaluation of petroleum from physical property data is a major part of the initial study of any petroleum that has been released to the enviromnent. Proper interpretation of the data resulting from the inspection of crude oil requires an understanding of their significance. Consequently, various standards organizations, such as the American Society for Testing and Materials (ASTM, 2004) in North America and the Institute of Petroleum in the United Kingdom (IP, 2004), have devoted considerable time and effort to the correlation... 

Your record of work, which may be paper-based or electronic, may be presented as your evidence for a record of experimental data. In this regard, you must record all your raw results and the uncertainties associated with each measurement. If you tabulate your results, the tables should have proper headings and the appropriate units. The more information you record as you carry out your project, then the easier it will be to write up a good, comprehensive Project Report later. The number of marks you obtain out of the 30 marks available for the project will be awarded by the marker based purely on what he or she reads in your Project Report. 

---