Cyclopentenes complexes

The i C NMR data for these and other tctraAapto-complexes are given in Table XLVII. As was the case for a-olefinic complexes, the C NMR data for these tetrahapto-comp t ts do not allow any further insight into the nature of metal-ligand bonding. For example, the bonding in a 1,3-diene complex may be viewed in extreme forms as either a bis-olefin complex or a metallo-cyclopentene complex, shown below. The C NMR parameters... 

Gagosz reported the 5-endo hydroxy- and alkoi -cyclisation of 1,5-enynes to afford functionalised cyclopentenes. Complex XXIV (1 mol%) was used as catalyst, the reaction proceeded at room temperature and the final products were isolated in moderate to excellent yields. Primary and secondaiy alcohols, phenols and water were successfully used as nucleophiles and incorporated in the products (Scheme 16.67). ... 

Chemically, wood tar is a complex mixture that contains at least 200 individual compounds, among which the foUowing have been isolated (1) 2-methoxyphenol, 2-methoxy-4-ethylphenol, 5-meth5i-2-methoxyphenol, 2,6-x5ienol, butyric acid, crotonic acid, 1-hydroxy-2-propanone, butyrolactone, 2-methyl-3-hydroxy-4JT-pyran-4-one, 2-methyl-2-propenal, methyl ethyl ketone, methyl isopropyl ketone, methyl furyl ketone, and 2-hydroxy-3-methyl-2-cyclopenten-l-one. 

Aldehyde 198 served as a key intermediate in a synthesis of the alkaloid ajmaline. The. Mannich aminomethylation transform triggers disconnection of two bonds in 198 to form dialdehyde 199, which by connective transform application can be converted to cyclopentene 200.58,59 The reduction in functional group reactivity and in structural complexity are both apparent by comparison of 198 and 200. 

The reaction of benzopentathiepin with alkenes [(fl-but- -ene, ( )-hex-3-ene, cyclopentene or cyclohexene] in the presence of the boron trifluoride-diethyl ether complex results in the formation of 3,4-dihydro-l,2,5-benzotrithiepins, e.g. formation of 3.407... 

Cyclopentene-l-dithiocarboxylic acid, 2-amino-meta complexes, 2, 800 Cyclophane chlorophylls, 3, 58 Cyclophane hemes iron complexes, 4,1269 Cyclophosphazenes metal complexes, 2, 81 Cyclopropane carbonylation... 

Scheme 36 Synthesis of donor-acceptor-substituted cyclopropanes 165 and cyclopentenes 166 from complexes 163 and acceptor-substituted alkenes 164 [115,116]...

In the same way as arylcarbene complexes, alkenylcarbene complexes typically react with alkynes to provide [3C+2S+1C0] Dotz cycloadducts (see Chap. ccChromium-Templated Benzannulation Reactions , p. 123 in this book). However, some isolated examples involving the formation of five-membered rings through [3C+2S] cycloaddition processes have been reported [71]. In this context, de Meijere et al. found that /J-donor-substituted alkenylcarbene complexes react with alkynes to give cyclopentene derivatives [71a]. This topic is also discussed in detail in Chap.ccThe Multifaceted Chemistry of Variously Substituted a,/J-Unsaturated Fischer Metalcarbenes , p. 21 of this book. 

Sect. 2.1.1) and [3C+2S] cyclopentene derivatives. The product distribution can be controlled by choosing the appropriate reaction conditions [72]. Moreover, the cyclopentene derivatives are the exclusive products from the coupling of fi-pyrrolyl-substituted carbene complexes [72b,c] (Scheme 25). The crucial intermediate chromacyclobutane is formed in an initial step by a [2+2] cycloaddition. This chromacyclobutane rearranges to give the rf-complex when non-coordinating solvents are used. Finally, a reductive elimination leads to the formal [3C+2S] cyclopentene derivatives. 

Coupling of alkenylcarbene complexes and siloxy-substituted 1,3-dienes affords vinylcyclopentene derivatives through a formal [3C+2S] cycloaddition process. This unusual reaction is explained by an initial [4C+2S] cycloaddition of the electron-poor chromadiene system as the 471 component and the terminal double bond of the siloxydiene as the dienophile. The chromacyclohexene intermediate evolves by a reductive elimination of the metal fragment to generate the [3C+2S] cyclopentene derivatives [73] (Scheme 26). 

Fischer alkenylcarbene complexes undergo cyclopentannulation to alkenyl AT,AT-dimethylhydrazones (1-amino-1-azadienes) to furnish [3C+2S] substituted cyclopentenes in a regio- and diastereoselective way along with minor amounts of [4S+1C] pyrrole derivatives. Enantiopure carbene complexes derived from (-)-8-(2-naphthyl)menthol afford mixtures of trans,trans-cycloipentenes and ds,ds-cyclopentenes with excellent face selectivity [75]. The mechanism proposed for the formation of these cyclopentene derivatives is outlined in Scheme 28. The process is initiated by nucleophilic 1,2-attack of the carbon... 

An interesting strategy for the diastereoselective synthesis of five-membered carbocycles was achieved by the reaction of alkenylcarbene complexes and lithium enolates derived from simple methyl ketones [79]. The use of more or less coordinating solvents (THF or Et20) or the presence of cosolvents such as PMDTA allows the selective synthesis of one or the other diastereoisomer of the final cyclopentene derivative (Scheme 32). 

The reaction of JV,iV-dimethylhydrazones (1-amino-1-azadienes) and alkenylcarbene complexes mainly produces [3C+2S] cyclopentene derivatives (see Sect. 2.6.4.5). However, a minor product in this reaction is a pyrrole derivative which can be considered as derived from a [4S+1C] cycloaddition process [75]. In this case, the reaction is initiated by the nucleophilic 1,2-addition of the nitrogen lone pair to the metal-carbon double bond followed by cyclisation and... 

S+1C] Cycloadducts have also been obtained in the reaction of alkenylcarbene complexes with electronically neutral 1,3-dienes by appropriate choice of the reaction conditions (see for comparison Sect. 2.6.4.4). Thus, performing the reaction in THF at 120 °C in a sealed flask the formal [4S+1C] cyclopentene derivative is generated in moderate yield [74a, 85] (Scheme 39). The key step... 

At this point the catalytic process developed by Dotz et al. using diazoalkanes and electron-rich dienes in the presence of catalytic amounts of pentacar-bonyl(r]2-ds-cyclooctene)chromium should be mentioned. This reaction leads to cyclopentene derivatives in a process which can be considered as a formal [4S+1C] cycloaddition reaction. A Fischer-type non-heteroatom-stabilised chromium carbene complex has been observed as an intermediate in this reaction [23a]. 

Ruthenium hydride complexes, e.g., the dimer 34, have been used by Hofmann et al. for the preparation of ruthenium carbene complexes [19]. Reaction of 34 with two equivalents of propargyl chloride 35 gives carbene complex 36 with a chelating diphosphane ligand (Eq. 3). Complex 36 is a remarkable example because its phosphine ligands are, in contrast to the other ruthenium carbene complexes described so far, arranged in a fixed cis stereochemistry. Although 36 was found to be less active than conventional metathesis catalysts, it catalyzes the ROMP of norbornene or cyclopentene. 

Utilizing an alternate mode of Diels-Alder reactivity, Harman has examined the cycloaddition reactions of 4,5-T -Os(II)pentaammine-3-vinylpyrrole complexes with suitably activated dienophiles <96JA7117>. For instance, cycloaddition of the p-vinylpyrrole complex 58 with 4-cyclopentene-l,3-dione, followed by DDQ oxidation affords 59, possessing the fused-ring indole skeleton of the marine cytotoxic agent, herbindole B. 

The aziridination of alkenes catalysed by [CuCl(IPr)] complex 150 was used in a key step of the total synthesis of (+)-agelastatin 152 (Scheme 5.39) [44], The aziridination occurs in presence of 50 mol% of 150 in 52% yield. It is important to note that 150 was the only complex able to promote the aziridination of 149, an electron-deficient cyclopentene. 

Palladium(II) complexes possessing bidentate ligands are known to efficiently catalyze the copolymerization of olefins with carbon monoxide to form polyketones.594-596 Sulfur dioxide is an attractive monomer for catalytic copolymerizations with olefins since S02, like CO, is known to undergo facile insertion reactions into a variety of transition metal-alkyl bonds. Indeed, Drent has patented alternating copolymerization of ethylene with S02 using various palladium(II) complexes.597 In 1998, Sen and coworkers also reported that [(dppp)PdMe(NCMe)]BF4 was an effective catalyst for the copolymerization of S02 with ethylene, propylene, and cyclopentene.598 There is a report of the insertion reactions of S02 into PdII-methyl bonds and the attempted spectroscopic detection of the copolymerization of ethylene and S02.599... 

The crystal structures of the complexes [Ag(C 2I I 7N2S)2]N03,1255 [Ag(C5H6S5)3]PF6 (C5H6S5 = 4,5-di(methylthio)-l,3-dithia-2-thione-4-cyclopentene),1 [Ag(C6H7NS)4]BF4... 

The authors chose pyruvic acid as their model compound this C3 molecule plays a central role in the metabolism of living cells. It was recently synthesized for the first time under hydrothermal conditions (Cody et al., 2000). Hazen and Deamer carried out their experiments at pressures and temperatures similar to those in hydrothermal systems (but not chosen to simulate such systems). The non-enzymatic reactions, which took place in relatively concentrated aqueous solutions, were intended to identify the subsequent self-selection and self-organisation potential of prebiotic molecular species. A considerable series of complex organic molecules was tentatively identified, such as methoxy- or methyl-substituted methyl benzoates or 2, 3, 4-trimethyl-2-cyclopenten-l-one, to name only a few. In particular, polymerisation products of pyruvic acid, and products of consecutive reactions such as decarboxylation and cycloaddition, were observed the expected tar fraction was not found, but water-soluble components were found as well as a chloroform-soluble fraction. The latter showed similarities to chloroform-soluble compounds from the Murchison carbonaceous chondrite (Hazen and Deamer, 2007). 

The photoindueed 1,7-cycloaddition of carbon monoxide across the divinyl-cyclopropane derivative 32 yields the two cyclic dienyl ketones 34, via the ferracyclononadiene intermediate 33 [18]. (Scheme 11) cyclopentene rearrangement. The dienylcyclopropane 35 is capable of forming the complex 36, followed by ring enlargement to 37 [19]. 1,1-Dicyclopropylethylene 29 is also converted to the 1-cyclopropyl-1-cyclopentene 38. The additional functionality of vinylcyclopropanes is necessary to serve as a 7t-donor... 

Materials. The commercially available aldehydes were distilled prior to use and stored at 0°C under argon. The cyclohexene- and cyclopentene- aldehydes, and the indane aldehyde (see Table) were gifts from Professor E. Piers of this department. The Ru(TPP)(PPh3)2 complex (1) was prepared from Ru(TPP)(CO)(EtOH) and PPh3 (1,7), while Ru(TPP)(CO)(tBu2POH), was prepared from the carbonyl (ethanol) adduct by treatment with tBu2PCl (1). The phosphines were from Strem Chemicals, and the ruthenium was obtained as RuCl Ol O from Johnson, Matthey Limited. 

The metal-catalysed olefin metathesis (equation 122) when applied to dienes results in ring-closure and expulsion of an olefin (equation 123). Thus the molybdenum carbene complex 241 promotes the decomposition of the 1,6-heptadiene derivative 242 to a mixture of the cyclopentene 243 and ethylene (equation 124)122. An analogous reaction of the alcohol 244 gives 245 (equation 125), and 4-benzyloxy-l,7-decadiene (246) affords the cyclohexene 247 and 1-butene (equation 126). These transformations, which occur in benzene at room temperature, proceed in excellent yields122. 

The 0/7/fo-alkylation of aromatic ketones with olefins can also be achieved by using the rhodium bis-olefin complex [C5Me5Rh(C2H3SiMe3)2] 2, as shown in Equation (9).7 This reaction is applied to a series of olefins (allyltrimethyl-silane, 1-pentene, norbornene, 2,2 -dimethyl-3-butene, cyclopentene, and vinyl ethyl ether) and aromatic ketones (benzophenone, 4,4 -dimethoxybenzophenone, 3,3 -bis(trifluoromethyl)benzophenone, dibenzosuberone, acetophenone, />-chloroacetophenone, and />-(trifluoromethyl)acetophenone). 

---