Cubic boron nitride hardness

Diamond. Diamond [7782 0-3] is the hardest substance known (see Carbon, diamond, natural). It has a Knoop hardness of 78—80 kN/m (8000—8200 kgf/m ). The next hardest substance is cubic boron nitride with a Knoop value of 46 kN/m, and its inventor, Wentorf, beheves that no manufactured material will ever exceed diamond s hardness (17). In 1987 the world production of natural industrial diamonds (4) was about 110 t (1 g = 5 carats). It should be noted that whereas the United States was the leading consumer of industrial diamonds in 1987 (140 t) only 260 kg of natural industrial diamonds were consumed this is the lowest figure in 48 years (4), illustrating the impact that synthetic diamonds have made on the natural diamond abrasive market. 

The greatest use of cubic boron nitride is as an abrasive under the name Bora2on, in the form of small crystals, 1—500 p.m in si2e. Usually these crystals are incorporated in abrasive wheels and used to grind hard ferrous and nickel-based alloys, ranging from high speed steel tools and chilled cast-iron to gas turbine parts. The extreme hardness of the crystals and their resistance to attack by air and hot metal make the wheels very durable, and close tolerances can be maintained on the workpieces. 

Cubic boron nitride (c-BN) is a different material altogether from h-BN, with a structure similar to that of diamond, which is characterized by extremely high hardness (second to diamond) and high thermal conductivity.As such, it is a material of great interest and a potential competitor to diamond, particularly for cutting and grinding applications. Its characteristics and properties are shown in Table 10.3... 

Cubic boron nitride is obtained from hexagonal boron nitride at high pressure and temperature in the presence of lithium nitride as a catalyst. It is almost as hard as diamond and has superior chemical resistance and a much higher oxidation threshold.Efforts to... 

Evolution did not use this element, only in certain plants is it important as a trace element. The element became well-known because of heat-resistant borosilicate glasses. Boranes are chemically interesting as B-H bonds react very specifically. Perborates are used in laundry detergents (Persil). The hardness of cubic boron nitride approaches that of diamond. Amorphous (brown) boron burns very quickly and gives off much heat and is therefore used in solid-propellant rockets and in igniters in airbags. 

D. He, Y. Zhao, L. Daemen, J. Qian, and T. D. Shen, Boron Suboxide As Hard as Cubic Boron Nitride, Appl. Phys. Lett., 81, 643 (2002). 

Cubed compound, in PVC siding manufacture, 25 685 Cube lattice, 8 114t Cubic boron nitride, 1 8 4 654 grinding wheels, 1 21 hardness in various scales, l 3t physical properties of, 4 653t Cubic close-packed (CCP) structure, of spinel ferrites, 11 60 Cubic ferrites, 11 55-57 Cubic geometry, for metal coordination numbers, 7 574, 575t. See also Cubic structure Cubic symmetry Cubic silsesquioxanes (CSS), 13 539 Cubic structure, of ferroelectric crystals, 11 94-95, 96 Cubic symmetry, 8 114t Cubitron sol-gel abrasives, 1 7 Cucurbituril inclusion compounds,... 

Cubic Phase of Boron Nitride c-BN. The cubic phase of boron nitride (c-BN) is one of the hardest materials, second only to diamond and with similar crystal structure. It is the first example of a new material theoretically predicted and then synthesized in laboratory. From automated synthesis a microcrystalline phase of cubic boron nitride is recovered at ambient conditions in a metastable state, providing the basic material for a wide range of cutting and grinding applications. Synthetic polycrystalline diamonds and nitrides are principally used as abrasives but in spite of the greater hardness of diamond, its employment as a superabrasive is limited by a relatively low chemical and thermal stability. Cubic boron nitride, on the contrary, has only half the hardness of diamond but an extremely high thermal stability and inertness. 

Table 3 summarizes the properties of the so-called nonmetallic hard materials, including diamond and the diamondlike carbides B4C, SiC, and Be2C. Also included in this category are comndum, A1203, cubic boron nitride, BN, aluminum nitride, AIN, silicon nitride, S N and silicon boride, SiB6 (12). 

The cubic y-modification has been recently observed under a pressure of 15 GPa and temperatures above 2000 K by the laser heating technique in a diamond cell [23] and in shock-wave compression experiments with pressures >33 GPa at 1800 K and >50 GPa at 2400 K [29]. This modification is often designated as the c-modification in the literature in analogy to the cubic boron nitride (c-BN). It has a spinel-type structure in which two silicon atoms are octahedrally coordinated by six nitrogen atoms, one silicon atom is coordinated tetrahedrally by four nitrogen atoms (Fig. 3c). The atomic coordinates for the cubic modification are given in Table 2. From calculations it is shown that this structure should have a high hardness similar to that of diamond and c-BN [23]. 

At high pressure and temperature (e.g., 2000°C and 60 kbar), hexagonal BN converts to cubic boron nitride, a material that has a tetrahedral structure analogous to diamond and is almost as hard it is employed as a high-temperature abrasive in situations where diamond forms carbides and hence cannot be used. 

A major limitation in the use of PCD is that it is not suitable for ferrous materials. Diamond reacts with iron in the presence of oxygen at high temperatures. This limitation forces the use of other hard materials, such as cubic boron nitride. 

Grinding and polishing is one of the oldest applications for wide band-gap materials primarily owing to the property of hardness that some of these materials possess (e.g., diamond). SiC and cubic boron nitride, in addition to diamond, have found a commercial market in grinding and polishing, primarily for ferromagnetic materials with high carbon solubility. 

Cubic boron nitride has high thermal conductivity, high dielectric constant, great hardness, and good chemical stability. The material can be doped n-type with Si and p-type with Be to form p-n junctions. While cubic boron nitride (c-BN) has been successfully doped p- and n-type to produce the first UV-LEDs, it is an indirect bandgap semiconductor which will ultimately limit emission efficiency. Relatively few studies have been performed on this material system. ECR-LPCVD techniques [23, 24] and LPCVD [25] have had the most success informing BN films. As with other specialty materials there is a lack of BN substrates. In order to produce the c-BN phase, high deposition temperatures often are combined with assisted techniques. 

---