Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cosolvent

The tendency to separate is expressed most often by the cloud point, the temperature at which the fuei-alcohol mixture loses its clarity, the first symptom of insolubility. Figure 5.17 gives an example of how the cloud-point temperature changes with the water content for different mixtures of gasoline and methanol. It appears that for a total water content of 500 ppm, that which can be easily observed considering the hydroscopic character of methanol, instability arrives when the temperature approaches 0°C. This situation is unacceptable and is the reason that incorporating methanol in a fuel implies that it be accompanied by a cosolvent. One of the most effective in this domain is tertiary butyl alcohol, TBA. Thus a mixture of 3% methanol and 2% TBA has been used for several years in Germany without noticeable incident. [Pg.244]

Cationic surfactants may be used [94] and the effect of salinity and valence of electrolyte on charged systems has been investigated [95-98]. The phospholipid lecithin can also produce microemulsions when combined with an alcohol cosolvent [99]. Microemulsions formed with a double-tailed surfactant such as Aerosol OT (AOT) do not require a cosurfactant for stability (see, for instance. Refs. 100, 101). Morphological hysteresis has been observed in the inversion process and the formation of stable mixtures of microemulsion indicated [102]. [Pg.517]

The lithiation of allene can also be carried out with ethyllithium or butyl-lithium in diethyl ether (prepared from the alkyl bromides), using THF as a cosolvent. The salt suspension which is initially present when the solution of alkyllithium is cooled to -50°C or lower has disappeared almost completely when the reaction between allene and alkyllithium is finished. [Pg.22]

Note 1. If commercial BuLi in hexane is used with diethyl ether or THF as cosolvent, a dark brown reaction mixture is formed, from which the desired product can be isolated in lower yields. [Pg.46]

Another way to shift the position of equilibrium to favor the formation of ester is by removing water from the reaction mixture This can be accomplished by adding benzene as a cosolvent and distilling the azeotropic mixture of benzene and water... [Pg.638]

The yield can be raised to 28% if the Hofmann elimination is conducted in the presence of a water-soluble copper or iron compound (19). Further improvements up to 50% were reported when the elimination was carried out in the presence of ketone compounds (20). Further beneficial effects have been found with certain cosolvents, with reported yields of greater than 70% (8). [Pg.430]

ARCO has developed a coproduct process which produces KA along with propylene oxide [75-56-9] (95—97). Cyclohexane is oxidized as in the high peroxide process to maximize the quantity of CHHP. The reactor effluent then is concentrated to about 20% CHHP by distilling off unreacted cyclohexane and cosolvent tert-huty alcohol [75-65-0]. This concentrate then is contacted with propylene [115-07-1] in another reactor in which the propylene is epoxidized with CHHP to form propylene oxide and KA. A molybdenum catalyst is employed. The product ratio is about 2.5 kg of KA pet kilogram of propylene oxide. [Pg.242]

The cosolvents are any one or a mixture of ethanol, propyl, and butyl alcohols. Corrosion inhibitor is also requited. [Pg.424]

Methanol is more soluble in aromatic than paraffinic hydrocarbons. Thus varying gasoline compositions can affect fuel blends. At room temperature, the solubiUty of methanol in gasoline is very limited in the presence of water. Generally, cosolvents are added to methanol—gasoline blends to enhance water tolerance. Methanol is practically insoluble in diesel fuel. [Pg.87]

Methacrylate monomers do not generally polymerize by a cationic mechanism. In fact, methacrylate functionaUty is often utilized as a passive pendent group for cationicaHy polymerizable monomers. Methacrylate monomers also have been used as solvents or cosolvents for cationic polymerizations (90,91). [Pg.269]

Evaporation Retardants. Small molecule solvents that make up the most effective paint removers also have high vapor pressure and evaporate easily, sometimes before the remover has time to penetrate the finish. Low vapor pressure cosolvents are added to help reduce evaporation. The best approach has been to add a low melting point paraffin wax (mp = 46-57° C) to the paint remover formulation. When evaporation occurs the solvent is chilled and the wax is shocked-out forming a film on the surface of the remover that acts as a barrier to evaporation (5,6). The addition of certain esters enhances the effectiveness of the wax film. It is important not to break the wax film with excessive bmshing or scraping until the remover has penetrated and lifted the finish from the substrate. Likewise, it is important that the remover be used at warm temperatures, since at cool temperatures the wax film may not form, or if it does it will be brittle and fracture. Rapid evaporation occurs when the wax film is absent or broken. [Pg.550]

Typical cosolvents include methanol [67-56-17, ethanol [64-17-5] isopropyl alcohol [67-65-OJ, or toluene. The selection of cosolvents depends on the requirement of the formula and their interaction with other ingredients. Methanol is a common cosolvent in methylene chloride formulas since it has good solvency and is needed to swell ceUulose-type thickening agents. A typical methylene chloride formula used to strip wood is as follows (7). [Pg.551]

The rate of stripping or the stripabiUty on cataly2ed urethane and epoxy resin finishes can be increased by adding formic acid, acetic acid, and phenol. Sodium hydroxide, potassium hydroxide, and trisodium phosphate [10101-89-0] may be added to the formula to increase the stripabiUty on enamel and latex paints. Other activators include oleic acid [112-80-17, trichloroacetic acid [76-85-9], ammonia, triethanolamine [102-71-6], and monoethyl amine. Methylene chloride-type removers are unique in their abiUty to accept cosolvents and activators that allow the solution to be neutral, alkaline, or acidic. This abihty gready expands the number of coatings that can be removed with methylene chloride removers. [Pg.551]

In petroleum and oxygenate finish removers, the major ingredient is normally acetone, methyl ethyl ketone [78-93-3], or toluene. Cosolvents include methanol, / -butanol [71-36-3], j -butyl alcohol [78-92-2], or xylene [1330-20-7]. Sodium hydroxide or amines are used to activate the remover. Paraffin wax is used as an evaporation retarder though its effectiveness is limited because it is highly soluble in the petroleum solvents. CeUulose thickeners are sometimes added to liquid formulas to assist in pulling the paraffin wax from the liquid to form a vapor barrier or to make a thick formula. Corrosion inhibitors are added to stabili2e tbe formula for packaging (qv). [Pg.551]

Some hquid defoamers are preemulsified relatives of paste defoamers. In addition to the fatty components mentioned above, kerosene [8008-20-6] or an organic cosolvent such as 2-propanol have been used to enhance stabiUty of the oil—water emulsion and the solubiUty of the defoamer s active ingredients. These cosolvents are used less frequently as concerns increase about volatile organic emissions (VOCs) from the paper machine. Additionally, the use of ultrapure mineral oil in defoamers has become commonplace. Concern about the creation of 2,3,7,8-tetrachlorodibenzodioxin (TCDD) and 2,3,7,8-tetrachlorodibenzofuran (TCDF) in the pulping process has led to the discovery of unchlorinated precursor molecules, especially in recycled mineral oil and other organic cosolvents used in defoamer formulations (28). In 1995 the mineral oil that is used is essentially free of dibenzodioxin and dibenzofuran. In addition, owing to both the concern about these oils and the fluctuating cost of raw materials, the trend in paper machine defoamers is toward water-based defoamers (29). [Pg.16]

In the post-dispersion process, the soHd phenoHc resin is added to a mixture of water, cosolvent, and dispersant at high shear mixing, possibly with heating. The cosolvent, frequently an alcohol or glycol ether, and heat soften the resin and permit small particles to form. On cooling, the resin particles, stabilized by dispersant and perhaps thickener, harden and resist settling and agglomeration. Both resole and novolak resins have been made by this process (25). [Pg.298]

Aqueous dispersions are alternatives to solutions of Hquid and soHd resins. They are usuaUy offered in 50% soHds and may contain thickeners and cosolvents as stabilizers and to promote coalescence. Both heat-reactive (resole) and nonheat-reactive (novolak) systems exist that contain unsubstituted or substituted phenols or mixtures. A related technology produces large, stable particles that can be isolated as discrete particles (44). In aqueous dispersion, the resin stmcture is designed to produce a hydrophobic polymer, which is stabilized in water by an interfacial agent. [Pg.303]

NMP are examples of suitable solvents for PES and PPSF polymerizations. Chlorobenzene or toluene are used as cosolvents at low concentrations. These cosolvents form an azeotrope with water as they distill out of the reaction mixture, thereby keeping the polymerization medium dehydrated. Potassium carbonate is a suitable choice for base. The synthesis of PES and PPSE differ from the PSE case in that the reaction is carried out in a single-step process. In other words, the formation of the dipotassium salt of the bisphenol is not completed in a separate first step. Equations 2 and 3 represent polymerizations based on the dipotassium salts of bisphenol S and biphenol to make PES and PPSE, respectively. [Pg.462]

Eatty bisamides are used primarily to kicrease sHp, reduce blocking, and reduce static ki polymeric systems. Other specialty appHcations kiclude cosolvents or coupling agents for polyamide reskis, fillers for electrical kisulation coatings, additives for asphalt to reduce cold flow, and synthetic waxes for textile treatments (68). Bisamides have been used ki all the traditional primary amide appHcations to kicrease lubricity and have become the amide of choice because of thek better efficiency. Bisamides have the highest commercial value ki the amide market. [Pg.186]

Humectants and low vapor pressure cosolvents are added to inhibit drying of ink in the no22les. Surfactants or cosolvents that lower surface tension are added to promote absorption of ink vehicle by the paper and to prevent bleed. For improvements in durabiUty, additional materials such as film-forming polymers have been added. Ink developments are providing ink-jet prints with improved lightfastness, waterfastness, and durabiUty. As a result, such prints are beginning to rival the quaUty of electrophotographic prints. [Pg.54]

Florida, Illinois, Louisiana, Massachusetts, New Jersey, Pennsylvania, and Rhode Island (43). 1-Propanol is allowed as a flavoting substance and adjuvants according to 21 CFR 172.515 (48), and is exempted from the requirement of tolerance when used as a solvent or cosolvent iu pesticide formulations (49) (see Flavors AND spices Pesticides). [Pg.120]

Low DS starch acetates ate manufactured by treatment of native starch with acetic acid or acetic anhydride, either alone or in pyridine or aqueous alkaline solution. Dimethyl sulfoxide may be used as a cosolvent with acetic anhydride to make low DS starch acetates ketene or vinyl acetate have also been employed. Commercially, acetic anhydride-aqueous alkaU is employed at pH 7—11 and room temperature to give a DS of 0.5. High DS starch acetates ate prepared by the methods previously detailed for low DS acetates, but with longer reaction time. [Pg.345]

Polymerization Solvent. Sulfolane can be used alone or in combination with a cosolvent as a polymerization solvent for polyureas, polysulfones, polysUoxanes, polyether polyols, polybenzimidazoles, polyphenylene ethers, poly(l,4-benzamide) (poly(imino-l,4-phenylenecarbonyl)), sUylated poly(amides), poly(arylene ether ketones), polythioamides, and poly(vinylnaphthalene/fumaronitrile) initiated by laser (134—144). Advantages of using sulfolane as a polymerization solvent include increased polymerization rate, ease of polymer purification, better solubilizing characteristics, and improved thermal stabUity. The increased polymerization rate has been attributed not only to an increase in the reaction temperature because of the higher boiling point of sulfolane, but also to a decrease in the activation energy of polymerization as a result of the contribution from the sulfonic group of the solvent. [Pg.70]


See other pages where Cosolvent is mentioned: [Pg.26]    [Pg.45]    [Pg.232]    [Pg.115]    [Pg.6]    [Pg.373]    [Pg.613]    [Pg.29]    [Pg.147]    [Pg.424]    [Pg.424]    [Pg.425]    [Pg.88]    [Pg.185]    [Pg.361]    [Pg.454]    [Pg.399]    [Pg.521]    [Pg.278]    [Pg.541]    [Pg.541]    [Pg.550]    [Pg.551]    [Pg.552]    [Pg.18]    [Pg.120]    [Pg.141]   
See also in sourсe #XX -- [ Pg.133 , Pg.134 , Pg.140 , Pg.165 , Pg.170 , Pg.171 ]

See also in sourсe #XX -- [ Pg.47 , Pg.58 , Pg.299 , Pg.385 , Pg.391 ]

See also in sourсe #XX -- [ Pg.84 ]

See also in sourсe #XX -- [ Pg.121 , Pg.123 , Pg.161 , Pg.162 , Pg.162 , Pg.163 , Pg.164 , Pg.165 , Pg.165 , Pg.166 , Pg.167 , Pg.179 , Pg.180 , Pg.181 , Pg.182 , Pg.183 , Pg.184 , Pg.185 , Pg.186 , Pg.187 , Pg.188 , Pg.227 , Pg.231 , Pg.236 , Pg.243 , Pg.598 , Pg.604 , Pg.647 ]

See also in sourсe #XX -- [ Pg.29 , Pg.35 , Pg.84 , Pg.109 , Pg.126 , Pg.193 , Pg.207 ]

See also in sourсe #XX -- [ Pg.285 ]

See also in sourсe #XX -- [ Pg.219 ]

See also in sourсe #XX -- [ Pg.188 ]

See also in sourсe #XX -- [ Pg.293 ]

See also in sourсe #XX -- [ Pg.82 ]

See also in sourсe #XX -- [ Pg.27 , Pg.89 , Pg.248 ]

See also in sourсe #XX -- [ Pg.208 , Pg.214 , Pg.261 , Pg.418 ]

See also in sourсe #XX -- [ Pg.105 , Pg.440 ]

See also in sourсe #XX -- [ Pg.27 , Pg.89 , Pg.248 ]

See also in sourсe #XX -- [ Pg.282 , Pg.284 , Pg.285 , Pg.288 , Pg.867 , Pg.1175 ]

See also in sourсe #XX -- [ Pg.282 , Pg.284 , Pg.285 , Pg.288 , Pg.867 , Pg.1175 ]

See also in sourсe #XX -- [ Pg.236 , Pg.317 , Pg.354 ]

See also in sourсe #XX -- [ Pg.57 ]

See also in sourсe #XX -- [ Pg.135 ]

See also in sourсe #XX -- [ Pg.282 , Pg.284 , Pg.285 , Pg.288 , Pg.867 , Pg.1175 ]

See also in sourсe #XX -- [ Pg.398 , Pg.399 , Pg.400 , Pg.405 , Pg.409 , Pg.410 , Pg.416 , Pg.417 , Pg.418 , Pg.423 , Pg.429 ]

See also in sourсe #XX -- [ Pg.185 ]

See also in sourсe #XX -- [ Pg.355 ]

See also in sourсe #XX -- [ Pg.51 , Pg.131 , Pg.187 , Pg.192 ]

See also in sourсe #XX -- [ Pg.362 , Pg.474 ]




SEARCH



Cosolvents

© 2024 chempedia.info