Control entity

Trust is Good, Control is Better says an old proverb. However, the Quality Assurance in GLP is not intended to act as a Quality Control entity its responsibilities lie more in the direction of helping and guiding the test facility in the ways of GLP. Even the final audit of a study, that has to be performed by the Quality Assurance imit in order to check whether the report truly reflects the raw data of the study, cannot be used to introduce qualities into the study... 

Controlling entity means an employer that is a prime contractor, general contractor, construction manager or any other legal entity which has the overall responsibility for the construction of the project-its planning, quality and completion. 

Inform the user of the equipment and the operator of the location of hazards beneath the equipment set-up area (such as voids, tanks, utilities) if those hazards are identified in documents (such as site drawings, as-built drawings, and soil analyses) that are in the possession of the controlling entity (whether at the site or off-site) or the hazards are otherwise known to that controlling entity. 

The suppression rule allows to hide actions happening for an external user but leaves they happen for guaranteeing the functionality of the system. Hence, the suppression rule (S) allows the controller to hide actions of the target by performing the control action Ba with a measure k. The target wants to performs the action a with a measure K, but the action is not performed by the controlled entity and the observed result is a r action, with the value calculated as the product k k of the suppressing and the target... 

MSHA also uses information on this identity report to determine the total size of the business for purposes of evaluating the size of civil money penalties that the operator will be subject to if the mine is cited for violations. Given the vigorous and comprehensive nature of Mine Act administration citations are a virtual certainty. Corporations must declare whether they are subsidiaries, and if so, they must name the parent company. By linking a subsidiary with all other mining subsidiaries of the corporate parent, MSHA estabhshes what it calls the size of the controlling entity. This size is a factor used in assessing civil penalties for all MSHA violations. ... 

Control entity is an individual operator or control element directing or controlling system fimctions for a mission. This term was created to support the nonhuman aspect of an authorized entity controlling the operation of a system. See Authorized Entity for additional related information. 

Reduction Action Affects GHG Sources (by Owning/Controlling Entity)... 

In open fibers the fiber wall may be a permselective membrane, and uses include dialysis, ultrafiltration, reverse osmosis, Dorman exchange (dialysis), osmotic pumping, pervaporation, gaseous separation, and stream filtration. Alternatively, the fiber wall may act as a catalytic reactor and immobilization of catalyst and enzyme in the wall entity may occur. Loaded fibers are used as sorbents, and in ion exchange and controlled release. Special uses of hoUow fibers include tissue-culture growth, heat exchangers, and others. 

Multivariable control strategies utilize multiple input—multiple output (MIMO) controUers that group the interacting manipulated and controlled variables as an entity. Using a matrix representation, the relationship between the deviations in the n controlled variable setpoints and thek current values,, and the n controUer outputs, is... 

Process measurements encompass the apphcation of the principles of metrology to the process in question. The objective is to obtain values for the current conditions within the process and make this information available in a form usable by either the control system, process operators, or any other entity that needs to know The term measured variable or process variable designates the process condition that is being determined. 

Distributed Control System (DCS) A system that divides process control functions into specific areas interconnected by communications (normally data highways) to form a single entity. It is characterized by digital controllers, typically administered by central operation interfaces and intermittent scanning of the data highway. 

Once it is recognized that particles adhere to a substrate so strongly that cohesive fracture often results upon application of a detachment force and that the contact region is better describable as an interphase [ 18J rather than a sharp demarcation or interface, the concept of treating a particle as an entity that is totally distinct from the substrate vanishes. Rather, one begins to see the substrate-particle structure somewhat as a composite material. To paraphrase this concept, one could, in many instances, treat surface roughness (a.k.a. asperities) as particles appended to the surface of a substrate. These asperities control the adhesion between two macroscopic bodies. 

You must provide information on your parent company. For purposes of Form R. a parent company is defined as the highest level company, located in the United States, that directly owns at least 50 percent of the voting stock of your company. If yourfacility is owned by a foreign entity, enter not applicable, NA, in this space. Corporate names should be treated as parent company names for companies with multiple facility sites. For example, the Bestchem Corporation is not owned or controlled by any other corporation but has sites throughout the country whose names begin with Bestchem. In this case, Bestchem Corporation would be listed as the parent company. 

These are the characteristics which need to be specified and their achievement controlled, assured, improved, managed, and demonstrated. These are the characteristics which form the subject matter of the specified requirements referred to in ISO 9000. When the value of these characteristics is quantified or qualified they are termed quality requirements or requirements for quality. ISO 8402 1994 defines requirements for quality as an expression of the needs or their translation into a set of quantitatively or qualitatively stated requirements for the characteristics of an entity to enable its realization and examination. While rather verbose, this definition removes the confusion over quality requirements and technical requirements. (An additional definition is provided in Appendix A.) Technical requirements for a product or service are quality requirements. The requirements of ISO 9000 are quality system requirements. 

Some critics recommend that the weapons laboratories (Los Alamos, Sandia, Lawrence Livermore) come under the control of the Department of Defense, and that ownership of the other laboratories be sold to the highest bidder, or turned over to the administrator now running the laboratory. The new owner can then contract with public and private entities in the free market, or shut down the laboratories. They contend that this is the best way for the laboratories to create a vision with value and effectively carry out a mission. 

One facet of kinetic studies which must be considered is the fact that the observed reaction rate coefficients in first- and higher-order reactions are assumed to be related to the electronic structure of the molecule. However, recent work has shown that this assumption can be highly misleading if, in fact, the observed reaction rate is close to the encounter rate, i.e. reaction occurs at almost every collision and is limited only by the speed with which the reacting entities can diffuse through the medium the reaction is then said to be subject to diffusion control (see Volume 2, Chapter 4). It is apparent that substituent effects derived from reaction rates measured under these conditions may or will be meaningless since the rate of substitution is already at or near the maximum possible. 

For entities of molecular size the numerical coefficient in the denominator of Eq. (9-12) should be reduced from 6 to 4 or less,6 which would also alter the expression for the diffusion-controlled rate constant from the traditional form given in Eq. (9-13) ... 

Methods to determine and control the properties of individual surfactant molecules and to determine the conditions needed to produce well-defined molecular assemblies are just beginning to emerge. We are at the threshold of being able to produce dehberately stmctured supramolecular entities with properties tailored to meet special applications. Some additional examples of problems that will have significant impacts over the next one or two decades follow ... 

---