Contents 1 Production

Metallocene catalysts produce high-comonomer content products, such as polypropylene block... 

Normally in the production of diesters great effort is spent in obtaining high yields. Catalytic support of the esterification reaction and azeotropic distillation to remove reaction water yields diesters near 100% purity. The amount of unreacted educt material is usually very small. Following sulfation, in the presence of a hydrotrope to reduce viscosity, a 65% active content product with virtually no byproducts is obtained. 

Bacterium PHAs carbon source Culture time (h) Cell cone. (gH) PHAs cone. (gl-i) PHAs content (%) Productivity (gl-i h-i)... 

Milk or skim milk is standardized to meet milk fat and total milk solids compositional requirements in the final dry milk product e.g., NFDM must contain <1.5% milk fat DWM must contain >26% and < 40% milk fat, and both must contain <5% moisture on an MSNF basis (CFR, 1982). Dry milk products must also meet U.S. Department of Agriculture and American Dry Milk Institute standards for titratable acidity, scorched particle content, solubility, and bacteria content. Product users may also have specialized requirements for color, flavor, and dispersibility. 

Acceptance criteria Product content Product quality Cell viability Cell density Bioburden... 

Figure 6-22 Hydrogen requirements for heavy fuel (designated sulfur content) production from various feedstocks.

American Cancer Society. American Cancer Society s Guide to Pain Control. Atlanta American Cancer Society Health Content Products, 2001. 

II. Product Summary Jubilant Biosys has created some content products in the bioinformatics and chemoinformatics area. These products leverage Jubilant s curation services to incorporate extensive curated databases with structured query modules and front-ends for data retrieval. The content is for the drug discovery process, specifically in the areas of target prioritization and lead identification. The databases are available in Oracle, SD format, and ISIS/Base DB formats and can be exported. The database can be queried across text, structure, substructure and sequences with built-in query modules. Some of the key parameters on which information is curated are ... 

Table 3. Effects of initial /C+ concentration on the maximum content, production, productivity (Pv) and yield (against sugar) of ginseng saponin (S) and polysaccharide (P) in suspension cultures of Panax ginseng in shake flasks...

Hairy roots Medium and light conditions Chi content Product tested Ref. 

Raw material Substrate content Productivity Ethanol 1 Yield 1/ha... 

Feedstock is typically straight-run kerosine with 18-50% normal paraffin content. Product purity is typically greater than 99 wt%. 

Table 3 illustrates low-fat spreads available with fat contents ranging from 60% to as little as 5%. Below about 20% fat content products of a water continuous emulsion character are prevalent (91). 

Figure 9. Comparison of tar and heavy aliphatic evolution with diminishing char aliphatic content products from 20-sec vacuum pyrolysis run ofPSOC 170 coal ((H) tar released (O) hydrocarbons released (k) aliphatic C-H in char)...

A practical consequence of the pseudo second-order model is that, as market requirements dictate a lower sulfur content product, the reaction rate in the final stages of a process will be quite low. With a second-order model the reaction rate in the final incremental portion of a reactor system will be only one-tenth at the 0.3% sulfur level what it would be at the 1% sulfur level. 

While adding oxygen in soyabeen oil to make epoxy plasticiser, oxirane content does not Increase more than 6.5. How we can produce More Oxirane content product ... 

Argonaut Endeavor Catalyst Screening System, http //www.argotech.com/ products/chemical/endeavor.html. Chemspeed AutoPlant At 00 (http //www.chemspeed.com /content/ products /products autoplanLalOO. shtml) and Accelerator SETIOO Synthesizer... 

---